Clearfield Home Deployment Kit Manuel utilisateur
Home Deployment Kit
Installation Manual ______________________________________________________
Manual 022941 Rev A - June 2022
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
2
Home Deployment Kit
Installation Manual _________________________________________________________
Manual 022941 REV A - June 2022
Table of Contents
Application 3
Technical Specications 3
FieldSmart SCD-TAP and Mini TAP 4
CraftSmart TAP-Splice 6
CraftSmart Fiber Outlet 8
Connector Cleaning Procedure 11
Standard Warranty 16
Proprietary Notice 17
Technical Support 17
3
Home Deployment Kit
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 022941 Rev A - June 2022
Application
Technical Specications
A CraftSmart/FieldSmart Home Deployment Kit (HDK) extends Clear-
eld’s eld-proven ber management expertise and leading-edge ber
connectivity performance all the way into the home. Starting with the Test
Access Point (TAP) solution of your choice, the Home Deployment Kit
packages the required patch cords, ber jack (Cleareld’s CraftSmart
Fiber Outlet) and necessary adapter and splice sleeve installation acces-
sories in a single box. Truck rolls are minimized and customer turn-up is
rapid.
Choose the CraftSmart TAP-Splice HDK for environments where splicing
or patch is needed and minimal slack storage is desired within the unit
mounted outside the home, and choose the FieldSmart SCD-TAP HDK
or FieldSmart Mini TAP HDK for environments where plug-and-play along
with internal slack storage is desired within the unit mounted outside the
home.
The CraftSmart Fiber Outlet allows for easy demarcation inside the prem-
ise and cable management for incoming feeder cable. The CraftSmart
Fiber Outlet can accommodate 4 entrance points for 3mm cable and up
to 4 output of SC adapter ports. The splice cassette is hinged and eas-
ily removable for nonsplicing applications. This small indoor enclosure
provides both bend limiting protection and a secure termination point to
connect the entrance ber to the included equipment jumper.
CraftSmart TAP-Splice FieldSmart SCD-TAP FieldSmart Mini TAP
Dimensions 4.00 x 6.50 x 1.75 Inches 12.17” H x 8.62” W x 3.91” D 9” H x 6” W x 3.91” D
Material PC+ ABS UV Stabilized, Flame Retardant
Polycarbonate
UV Stabilized, Flame Retardant
Polycarbonate
Rating IP-66 GR-771 and Designed for
NEMA-4
GR-771 and Designed for
NEMA-4
Max. Capacity SC: 2 Ports, LC: 4 Ports, PLC:
1x2 (SC), 10ft 3mm storage
1 Port, 200ft FLEXdrop
deployed, 100ft storage
1 Port, 100ft FLEXdrop
deployed, 50ft storage
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
4
Home Deployment Kit
Installation Manual _________________________________________________________
Manual 022941 REV A - June 2022
Mount your box to the wall using the 4 mounting locations
inside.
Bring your microduct and incoming cable into the box through
the sealcon.
Pull your incoming cable slack into box and store it on the slack
reel.
Note: The FieldSmart SCD-TAP HDK can hold up to 100ft of
incoming cable slack, while the FieldSmart Mini TAP HDK can
hold up to 50ft of incoming cable slack
Install your FLEXdrop ber reel onto slack reel or mount until
the rst click, where the reel can still spin freely.
Note: Do not remove the rubber band around the FLEXdrop
reel, as it will help prevent over-spooling when pulling the ber
into the premises.
1.
2.
FieldSmart SCD-TAP and Mini TAP
3.
4.
5
Home Deployment Kit
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 022941 Rev A - June 2022
Feed your FLEXdrop through the sealcon, pulling the outgoing
ber off the reel and into the premises, up to the CraftSmart
Fiber Outlet box.
Note: Before proceeding, jump to the CraftSmart Fiber Outlet
section and complete the setup inside the premises.
Once your outgoing ber is secured at the Fiber Outlet box, reel
the remaining slack back onto FLEXdrop reel.
Press on the FLEXdrop reel until you get to the 2nd click, lock-
ing it into place.
You can now make the connection between the incoming feeder
ber and your FLEXdrop outgoing ber.
Note: The top of the reel can hold about 14 inches of slack.
Make your connection in the adapter housed in the L-bracket in
the base of the box, dress the bers into the slack storage on
top of the reel and reinstall the protective cover.
5.
6.
7.
8.
9.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
6
Home Deployment Kit
Installation Manual _________________________________________________________
Manual 022941 REV A - June 2022
CraftSmart TAP-Splice
Mount the CraftSmart TAP-Splice to the wall using the 3 mount-
ing holes on the box.
Bring your drop ber into the box, which will be spliced to the
one meter pigtail provided with the CraftSmart TAP-Splice.
Note: The maximum recommended drop slack storage is 10ft
of 3mm cable.
1.
2.
3.
4.
After performing your splice, install the pigtail’s connector into
the provided adapter.
Install the adapter into its location on the back wall of the box
and wrap your remaining slack inside the splice tray.
5. Pass the outgoing pushable FLEXdrop, provided with the
CraftSmart TAP-Splice, through the rubber entrance grommet.
7
Home Deployment Kit
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 022941 Rev A - June 2022
Carefully follow the connectorizing instructions provided with
the FLEXdrop cable, and make the connection to the spliced
pigtail.
6.
Return the swinging splice tray to the closed position and
secure the lid.
7.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
8
Home Deployment Kit
Installation Manual _________________________________________________________
Manual 022941 REV A - June 2022
CraftSmart Fiber Outlet
1. To open the CraftSmart Fiber Outlet box, press along the
longer top and bottom sides and lift away the cover.
2. The inner tray located inside the box can be removed, it
will not be used in this recommended application.
3.
4.
Note that when installing the provided adapter into the
box, the key side must face up and the adapter retaining
clips must be within the Fiber Outlet box.
The incoming ber can either come through the back of
the box if passing through the wall, or through the other
side of the bottom of the box. Simply snap off the tab to
make the opening.
9
Home Deployment Kit
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 022941 Rev A - June 2022
5. Install the Fiber Outlet box onto the wall using the two mount-
ing holes. If applicable, feed the ber through the back wall’s
pass-through hole rst.
6. Carefully follow the connectorizing instruction provided with the
FLEXdrop cable.
7. Remove the adapter from the box and insert your connector-
ized FLEXdrop into the adapter, ensuring the keys are aligned.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
10
Home Deployment Kit
Installation Manual _________________________________________________________
Manual 022941 REV A - June 2022
8. Route the ber around the outside edge of the box
through the ber management ngers and reinstall the
adapter into its location
9. Reinstall the cover of the CraftSmart Fiber Outlet box.
You are now ready to make your connection to the ONT.
Table des matières
Autres manuels Clearfield Matériel réseau
Clearfield
Clearfield FieldSmart 96 Port PON Manuel utilisateur
Clearfield
Clearfield StreetSmart Aerial Manuel utilisateur
Clearfield
Clearfield WaveSmart Circulator Manuel utilisateur
Clearfield
Clearfield FieldSmart FiberFlex 2000 Manuel utilisateur
Clearfield
Clearfield FieldSmart Manuel utilisateur
Clearfield
Clearfield CraftSmart FiberFirst Manuel utilisateur
Clearfield
Clearfield StreetSmart Manuel utilisateur
Clearfield
Clearfield CleanKit-LC-01 Manuel utilisateur
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
