Claypaky C71050 Manuel utilisateur

Ce manuel convient aux modèles suivants

3

Table des matières

Autres manuels Claypaky Équipement d'éclairage

Claypaky

Claypaky Alpha Spot 575 HPE Manuel utilisateur

Claypaky

Claypaky CP COLOR 250 Manuel utilisateur

Claypaky

Claypaky STAGE COLOR 300 Manuel utilisateur

Claypaky

Claypaky ALPHA BEAM C61093 Manuel utilisateur

Claypaky

Claypaky VOLERO BATTEN AQUA Manuel utilisateur

Claypaky

Claypaky Arolla Spot MP Manuel utilisateur

Claypaky

Claypaky MINISCAN HP3 Manuel utilisateur

Claypaky

Claypaky Odeon Flood Series Manuel utilisateur

Claypaky

Claypaky DISPLAY C52145 Manuel utilisateur

Claypaky

Claypaky ALPHA SPOT HPE 1500 Manuel utilisateur

Claypaky

Claypaky A.LEDA WASH K5 C61401 Manuel utilisateur

Claypaky

Claypaky C61325 Manuel utilisateur

Claypaky

Claypaky STAGE LIGHT 300 AE Manuel utilisateur

Claypaky

Claypaky HMI 575 Manuel utilisateur

Claypaky

Claypaky ALPHA BEAM 700 Manuel utilisateur

Claypaky

Claypaky VOLERO WAVE Manuel utilisateur

Claypaky

Claypaky A.LEDA WASH K10 CC Manuel utilisateur

Claypaky

Claypaky DISPLAY LINE C52116 Manuel utilisateur

Claypaky

Claypaky ALPHA SPOT HPE 1500 ST Manuel utilisateur

Claypaky

Claypaky STAGE COLOR 300 Manuel utilisateur

Claypaky

Claypaky SPHERISCAN C11260 Manuel utilisateur

Claypaky

Claypaky AXCOR WASH 600 Manuel utilisateur

Claypaky

Claypaky Alpha Spot HPE 1200 Manuel utilisateur

Claypaky

Claypaky CP COLOR 150-E Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur

1

INSTRUCTIONS ANUAL

Congratulations on choosing a Clay Paky product!

We thank you for your choice. Please note that this product,

as all the others in the rich Clay Paky range, has been

designed and manufactured with total quality to ensure

e cellent performance and best meet your e pectations and

requirements.

Carefully read this instruction manual in its entirety and keep it

safe for future reference.

It is essential to know the information and comply with the

instructions given in this manual in order to ensure the fitting is

installed, used and serviced correctly and safely.

CLAY PA Y S.p.A. disclaims all liability for damage to the

fitting or to the other property or persons deriving from

installation, use and maintenance that have not been carried

out in conformity with this instructions manual, which must

always accompany the fitting.

CLAY PA Y S.p.A. reserves the right to modify the

characteristics stated in this instructions manual at any time and

without prior notice.

CONTENTS

Page

2

3

3

4

7

13

13

14

15

16

16

17

PRELI INARY

Contents

Safety information

Unpacking and preparation

Installation and start-up

Control panel

Main menu

Manual zoom

Maintenance

Battery removal

Optional accessories

Technical data

Cause and solution of problems

Channel functions

GLOW UP

& FLIGHT CASE

C C71050

TW C71055

W C71060

F21230

®

ITALIANO

All manuals and user guides at all-guides.com

all-guides.com

2

GLOW UP

• Installation

Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of

anchorage is stable before positioning the projector.

The safety chain must be properly hooked onto the fitting and secured to the framework, so that,

if the primary support system fails, the fitting falls as little as possible. If the safety chain gets used,

it needs to be replaced with a genuine spare.

• inimum distance of illuminated objects

The projector needs to be positioned so that the objects hit by the beam of light are at least 0.2

metres (8’ 2”) from the lens of the projector.

• inimum distance from flammable materials

The projector must be positioned so that any flammable materials are at least 0.20 metres (8") from

every point on the surface of the fitting.

• ounting surfaces

It is permissible to mount the fitting on normally flammable surfaces.

• aximum ambient temperature

Do not use the project if ambient temperature (Ta) exceeds 40°C.

• IP65 protection rating

The equipment is fully protected against dust (first digit 6) and against jets of water (second digit 5).

• Protection against electrical shock

Connection must be made to a power supply system fitted with efficient earthing (Class I appliance

according to standard EN 60598-1).

It is, moreover, recommended to protect the supply lines of the projectors from indirect contact

and/or shorting to earth by using appropriately sized residual current devices.

• Connection to the power mains

A qualified electrician must perform connection to the power mains.

Check that the mains frequency and voltage correspond to the frequency and voltage for which the

projector was designed and indicated on the electrical data label.

This label also gives the input power. Refer to the latter to evaluate the maximum number of

devices to be connected to the mains to avoid overloads.

• External surface temperature

The maximum temperature that can be reached on the external surface of the fitting, in a thermally

steady state, is 90°C (320°F).

• aintenance

Before starting any maintenance work or cleaning the projector, cut off power from the supply

mains. After switching off, do not remove any parts of the fitting for at least 10 minutes. The lenses

must be mounted and, if visibly damaged, they have to be replaced with genuine spares.

• Battery

This product contains a lithium iron tetraphosphate rechargeable battery. To protect the

environment, please discard the battery at the end of its life cycle according to current law.

Instructions on how to remove the battery from the equipment are available at www.claypaky.it.

SAFETY INFOR ATION

The products referred to in this manual conform to the European Community Directives to which

they are subject:

•Low Voltage Directive 2006/95/EC

•Electromagnetic Compatibility Directive 2004/108/EC

0.2

90°C

IP65

LiFePo

All manuals and user guides at all-guides.com

3

GLOW UP

UNPACKING AND PREPARATION

Packing content - Fig. 1

2

Projector installation - Fig. 2

The projector can be installed on the floor resting on specific rubber feet, on a truss, on the ceiling or wall.

WARNING: the safety chain must be installed except when the projector rests on the floor. (Code 105015/801 available upon request). This

must be secured to the projector support structure and then hooked to the fastening point at the centre of the base.

1

2

3

2

3

14

3

Connecting and disconnecting the power cord - Fig. 3

When connecting the power cord the user can choose whether to use the GlowUp in one of the following ways:

1) Power cord connected for battery charge.

2) Power cord connected for projector power (thus bypassing battery operations).

The GlowUp cannot work in both ways simultaneously.

INSTALLATION AND START-UP

099114 OPTIONAL ACCESSORY C71110

1

All manuals and user guides at all-guides.com

4

GLOW UP

Switching on the projector - Fig. 6

The projector immediately turns on when the power cord is plugged in or, if used in battery mode, by pressing and holding down keys

A

and

S

for

several seconds.

Clay Paky GLOW UP Address xxx BAT xx%

GLOW UP Software release x.x x xxxxx ??? *

The control panel (Figure 8) has a display and buttons for complete programming and management of the projector menu.

The display can be in one of two conditions: idle status and settings status.

When idle, the projector DMX address and percent battery charge are displayed.

If no button is pressed after a wait period (about 60 seconds) when in menu settings status, the display automatically returns to idle status. It should

be noted that when this condition occurs, any modified value that has not yet been confirmed with the

A

key will be cancelled.

To turn off the GlowUP, hold down keys

A

and

S

for several seconds. A confirmation message will appear (Switch off?).

Press

A

-Yes to turn off the GlowUP or press

S

-NO to return to the settings menu.

CONTROL PANEL

6

Connections to the power mains - Fig. 4

L

N

DMX 512

Power Supply

4

5

SIGNAL

SCREEN

DMX 512

5 PIN

1

2

3

4

5

SIGNAL

SCREEN

1

3

2

DMX 512

3 PIN

SIGNAL

SIGNAL

Connections to the control signal line (D X) - Fig. 5

Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ω characteristic impedance, 22-24 AWG, low capacity. Do not use

microphone cable or other cable with characteristics differing from those specified. End connections must be made using XLR type 3 or 5-pin male/female

connectors. A terminating plug must be inserted on the last projector with a resistance of 120 Ω(minimum 1/4 W) between terminals 2 and 3.

I PORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing must be connected to the shield

braid and pin 1 of the connectors.

*see pag. 5

Display symbology

All manuals and user guides at all-guides.com

5

GLOW UP

Continued ➔

Initial projector address settings

An initial address must be set on each single project for the control signal.

Address settings: see page 9.

Button functions – enu use

ENU USE:

1) Press the

S

key once – the various Menu items appear on the display.

2) Press the

B

and DOWN

C

keys to select the menu to be opened:

• Stand Alone: Stand alone operating mode settings

• Radio: Wireless operating mode settings

• Setup (Setup Menu): Channel mode and projector address settings

• Information (Information Menu): To read counters, software version and other information.

• Manual control: (Manual control Menu): Activates test and manual control functions.

• Advanced (Advanced Menu): ADVANCED Menu use is recommended for qualified technical personnel.

To open the ADVANCED menu, see page 11.

3) Press the

F

key to display the first item in the selected menu.

4) Use the UP

B

and DOWN

C

keys to select menu items.

• If pressed in idle status: Cyclically switches between idle status and menu settings.

• If pressed while setting a menu: Moves to an upper level without changing anything (exits the function)

Decreases the value displayed (with auto-repetitions), or passes to the next item on the menu

For quick access to the minimum parameter value, press the UP key while holding down the DOWN key.

Increases the value displayed (with auto-repetitions), or passes to the previous item on the menu

For quick access to the maximum parameter value, press the DOWN key while holding down the UP key.

Confirms the displayed value or activates the displayed function or opens the next menu.

SELECT

DOWN

UP

ENTER

Transmission to DMX cable

Reception from DMX cable

Reception DMX from Radio (wireless)

Transmission DMX from Radio (wireless)

Display symbology

All manuals and user guides at all-guides.com

GLOW UP

6

4

3

1

2

1

2

Fuse 6,3x32mm

10AT 250Vac

(030470)

Fuse 6,3x32mm

3AT 250Vac

(030471)

9

8

Charging glow up - Fig. 8

From 1 to 6 Glow Ups can be simultaneously charged by appropriately connecting and powering the flight-case.

Replacing flight case fuses - Fig. 9

Each flight-case has 2 fuses associated with the main power cord connection and one fuse for each Glow UP charge station.

All manuals and user guides at all-guides.com

all-guides.com

C TW

7

GLOW UP

AIN ENU

ENU SETTING

Stand Alone

1

Continued ➔

Edit scene

Edit chase

DMX

recorder

Play chase

Play DMX

recorder

SetUp

4

DMX

Address

DMX Mode

Color Mode

Backlight

Display

contrast

Factory

Advanced

6

System

Errors

CPU Reset

Test

Change

Model

FW

Uploader

Battery

Select

Radio

2

Unlink

from TX

Add RX

Disconnect

all RX

3

Manual

Control

Green Dimmer Stop

Strobe

Dimmer

Stop

Strobe

Macro

Color

Macro

Timing

Macro

Fading

Red Tunable

white Dimmer

C TW W

Blue Stop

Strobe

White

5

Partial LED

hours

Charge

Battery num.

System

version

LED

temperature

Battery

voltage

Battery

temperature

Product ID

Channel

monitor

Total LED

hours

Charge

Battery hours

Discharge

Battery hours

Information

Color temp

All manuals and user guides at all-guides.com

8

GLOW UP

EDIT SCENE

To create/overwrite/modify a SCENE customised by the user:

1) Press ENTER

A

– SCENE 1 appears on the display.

2) Use the UP

B

and DOWN

C

keys to select from the ten available

SCENES.

3) Press ENTER

A

to open a SCENE.

4) A value can be associated with each GlowUp channel inside each

SCENE using the UP

B

and DOWN

C

keys.

5) When finished with settings, press SELECT

S

. A confirmation

message appears: SAVE SCENE X ?.

6) Press ENTER

A

to confirm and save the SCENE or SELECT

S

to

return to the previous menu.

EDIT CHASE

To create a CHASE made up of a series of SCENES saved by the user.

1) Press ENTER

A

– STEP 1 appears on the display.

2) Use the UP

B

and DOWN

C

keys to select the STEP to be

attributed a SCENE.

3) Press ENTER

A

and use the UP

B

and DOWN

C

keys to select

the SCENE to be imported (SC0..or NONE).

4) Press ENTER

A

to confirm the selection or SELECT

S

to return to

the previous menu.

D X RECORDER

To record a scene sequence programmed on the unit.

PLAY CHASE

Starts CHASE playback (created with EDIT CHASE).

Press ENTER

A

and CHASE to display the sequence of STEPS

PLAY D X RECORDER

Starts program playback (created/recorded with DMX RECORDER).

Press ENTER

A

to run the program.

Assigns the desired command to the GlowUP Radio module

1) Press ENTER

A

– current settings appear on the display.

2) Use the UP

B

and DOWN

C

keys to select one of the following

settings:

Add RX – Connected to all free receivers

Disconnect all RX – Disconnected from all receivers

Unlink from TX – Disconnected from the transmitter

3) Press ENTER

A

to confirm the selection (the display blinks for

several seconds) or SELECT

S

to keep the current settings and

return to the previous Menu.

STAND ALONE ENU

RADIO ENU

Stand Alone Edit scene

Edit chase

DMX

recorder

Radio Unlink

from TX

Add RX

Disconnect

all RX

Play chase

Play DMX

recorder

All manuals and user guides at all-guides.com

9

GLOW UP

Allows the user to set a level for each of the following channels in BIT from

the control panel:

GLOWUP C GLOWUP TW GLOWUP W

Red Tunable white Dimmer

Green Dimmer Stop Strobe

Blue Stop Strobe

White

Dimmer

Strop Strobe

acro Color

acro Timing

acro Fading

1) Press ENTER

A

– the first channel (RED) appears on the display.

2) Use the UP

B

and DOWN

C

keys to select the concerned channel.

3) Press ENTER

A

and use the UP

B

and DOWN

C

keys to assign

the DMX level to the selected channel (value between 0 and 255).

4) Press SELECT

S

to return to the previous Menu.

D X ADDRESS

Allows the user to set the DMX address to be assigned to the projector.

1) Press ENTER

A

– the current DMX address appears on the display.

2) Use the UP

B

and DOWN

C

keys to set the DMX address.

3) Press ENTER

A

to confirm the selection (the display blinks for

several seconds) or SELECT

S

to keep the current settings and

return to the previous Menu.

D X ODE

Allows the user to set the receiver/transmission mode to be assigned to

the projector.

1) Press ENTER

A

– current settings appear on the display.

2) Use the UP

B

and DOWN

C

keys to select the mode to be

assigned to GLOW UP from those available:

Slave Cable – Receiver from DMX cable

Slave Wireless – Receiver from wireless

Stand Alone – STAND ALONE operating mode

aster Cable – Transmitter via DMX cable

aster Wireless - Transmitter via wireless

aster Cable + Wireless – Transmitter via DMX cable + wireless

Repeater Cable – Repeater from DMX cable to wireless

Repeater Wireless – Repeater from wireless to DMX cable

3) Press ENTER

A

to confirm the selection (the display blinks for

several seconds) or SELECT

S

to keep the current settings and

return to the previous Menu.

COLOR ODE (GLOWUP C)

Allows the user to select the color

mixing system.

1) Press ENTER

A

– current

settings appear on the display.

2) Use the UP

B

and DOWN

C

keys to select RGB or

CMY.

3) Press ENTER

A

to confirm

the selection (the display

blinks for several seconds) or

SELECT

S

to keep the

current settings and return to

the previous Menu.

ANUAL CONTROL ENU

Continued ➔

Manual

Control

Green

Dimmer

Stop

Strobe

Macro

Color

Macro

Timing

Macro

Fading

Red

Blue

White

SetUp DMX

Address

DMX Mode

Color Mode

SET UP ENU

C TW W

C TW

Dimmer Stop

Strobe

Tunable

white Dimmer

Stop

Strobe

Color

temperature

COLOR TE P (GLOWUP TW)

Allows the user to select the color

mixing system.

1) Press ENTER

A

– current

settings appear on the display.

2) Use the UP

B

and DOWN

C

keys to select Independent mode

or Constant intensity mode or

ax intensity mode.

3) Press ENTER

A

to confirm the

selection (the display blinks for

several seconds) or SELECT

S

to keep the current settings and

return to the previous Menu.

All manuals and user guides at all-guides.com

GLOW UP

BACKLIGHT

Used to turn off display backlight 60 seconds after switching to idle status.

To turn back on, simply press any key.

1) Press ENTER

A

– current settings appear on the display.

2) Use the UP

B

and DOWN

C

keys to turn display backlight OFF or ON.

3) Press ENTER

A

to confirm the selection (the display blinks for

several seconds) or SELECT

S

to keep the current settings and

return to the previous Menu.

DISPLAY CONTRAST

Lets the user modify display contrast.

1) Press ENTER

A

– current settings appear on the display.

2) Use the UP

B

and DOWN

C

keys to modify the value from 0 to 10

according to the desired contrast.

3) Press SELECT

S

to return to the previous Menu.

FACTORY

Used for restoring default values on all options menu items and relevant

submenus.

1) Press ENTER

A

– a confirmation message appears on the display (Ok?)

2) Press ENTER

A

to confirm the selection (the display blinks for

several seconds) or SELECT

S

to keep the current settings.

TOTAL LED HOURS

Displays total LED working hours.

1) Press ENTER

A

– total LED working hours appear on the display.

2) Press SELECT

S

to return to the previous Menu.

PARTIAL LED HOURS

Displays partial LED working hours.

1) Press ENTER

A

– partial LED working hours appear on the display.

2) To reset partial LED working hours, simultaneously press and hold

down the UP

B

and DOWN

C

keys for several seconds. When

“Rst?” (Reset) appears, confirm by pressing ENTER

A

.

3) Press SELECT

S

to return to the previous Menu.

CHARGE BATTERY HOURS

Displays total hours from the last battery charge.

1) Press ENTER

A

– total charge hours appear on the display.

2) Press SELECT

S

to return to the previous Menu.

DISCHARGE BATTERY HOURS

Displays total GlowUp battery powered operating hours from last time

used.

1) Press ENTER

A

– total battery powered operating hours appear on

the display.

2) Press SELECT

S

to return to the previous Menu.

CHARGE BATTERY NU BER

Displays the number of Glow UP battery charge cycles.

1) Press ENTER

A

– the number of charge cycles appears on the display.

2) Press SELECT

S

to return to the previous Menu.

SYSTE VERSION

Displays the version of the firmware loaded on the CPU board.

1) Press ENTER

A

– two options appear on the display:

Application release

Boot release

2) Use the UP

B

and DOWN

C

keys to select which of the two

firmware version items to be displayed.

3) Press ENTER

A

– the release appears on the display.

4) Press SELECT

S

to return to the previous Menu.

INFOR ATION ENU

Backlight

Display

contrast

Factory

Information

Partial LED

hours

Charge

Battery num.

Total LED

hours

Charge

Battery hours

Discharge

Battery hours

System

version

10

All manuals and user guides at all-guides.com