Claypaky SHARPY PLUS AQUA Manuel utilisateur
1
CD3002
INST UCTION MANUAL
ENGLISH
SHARPY PLUS AQUA
INDEX
Page Contents
2 1. Safety information
3 2. Unpacking and preparation
4 3. Installation and start-up
4 3.1 Installing the fixture
4 3.2 Connecting to the mains supply
5 3.3 Connecting the signal control line: DMX / Art-Net
5 3.4 Switching on the fixture and basic setup
7 4. Maintenance
7 4.1 Opening the covers
8 4.2 Periodical cleaning
9 4.3 Effect module removal
11 4.4 Rotating gobos
12 4.5 Battery removal
13 5. Specifications
PELIMINAY
Congratulations on choosing a Claypaky product!
We thank you for your custom.
Please note that this product, as all the others in the
rich Claypaky range, has been designed and made with
total quality to ensure excellent performance and best
meet your expectations and requirements.
2
SHARPY PLUS AQUA
EN
IT
DE
ES
F
U
SAFETY INFO MATION
IMPORTANT: Claypaky recommend you to carefully read and keep the safety information on this product, also
available in digital format at the following link:
www.claypaky.com
Ref: [FIS01Z - Safety Information Sharpy Plus Aqua]
INFO MAZIONI DI SICU EZZA
IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:
www.claypaky.com
Rif: [FIS01Z - Safety Information Sharpy Plus Aqua]
INFO MATIONEN ZU SICHE HEIT
WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:
www.claypaky.com
Ref: [FIS01Z - Safety Information Sharpy Plus Aqua]
INFO MACIONES DE SEGU IDAD
IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:
www.claypaky.com
Ref: [FIS01Z - Safety Information Sharpy Plus Aqua]
CONSIGNES DE SÉCU ITÉ
IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à
ce produit, disponibles en version digitale au lien suivant:
www.claypaky.com/download
Réf. : [FIS01Z - Safety Information Sharpy Plus Aqua]
ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
ВАЖНО: Claypaky рекомендует внимател но прочитат и сохранит инструкцию по технике безопасности
данного изделия, которая всегда доступна в электронном формате по следующей ссылке:
www.claypaky.com
Наименование: [FIS01Z - Safety Information Sharpy Plus Aqua]
1. SAFETY INFO MATION
3
SHARPY PLUS AQUA
1
90°
90°
90°
90°
UNLOCKED
LOCKED
PAN Mechanism Lock and elease (every 90°) - Fig. 2
TILT Mechanism Lock and elease (every 45°) - Fig. 3
2 3
Packing contents - Fig. 1
45°
45°
45°
45°
45°
45°
45°
LOCKED
UNLOCKED
2. UNPACKING AND P EPA ATION
Omega bracket
IP 65 connector Wi-fi receiver
Lamp inside
the fixture
4
SHARPY PLUS AQUA
4
Ethernet
DMX out Power in
DMX in
Wi-Fi
LCD Display Functional buttons
5
2
1
1
2
3
6
Connecting and disconnecting power cable - Fig. 6
Installing the projector - Fig. 4
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WA NING: with the exception o when the projector is positioned on the loor, the sa ety cable must be itted. (Cod. 105041/003 available on request).
This must be securely ixed to the support structure o the projector and then connected to the ixing point o the base.
3. INSTALLATION AND STA T-UP
3.1 Installing the fixture
Light collimation system
This product contains internal light collimation system.
Avoid intense light from any angle.
3.2 Connecting to the mains supply
Control panel - Fig. 5
5
SHARPY PLUS AQUA
Switching on the projector - Fig. 9
Plug the power connector. The projector starts resetting the effects. At the same time, the following information scrolls on the display:
Model Firmware xxx (Fixture ID) System errors
SHA PY PLUS Version X.X.X Dmx Address xxx E: .........................
AQUA Date - Hour W: .........................
On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control
panel (Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two
conditions: rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address.
During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.
It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the
F
key will be cancelled.
1
Dmx Address
Warning Message
9
Connecting to the control signal line (DMX) - Fig. 8
Use a cable compliant to the EIA RS-485 specifications: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cables or other cables with characteristics differing from those specified. The end connections must be made using XLR type 5-pin male/female
connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPO TANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the
shield braid and to pin 1 of the connectors.
Connecting to the mains supply - Fig. 7
SIGNAL
SCREEN
DMX512
5 PIN
1
2
3
4
5
SIGNAL
Mains
7
8
Continue ➔
3.3 Connecting the signal control line: DMX / Art-Net
3.4 Switching on the fixture and basic setup
SHARPY PLUS AQUA
6
28
28
eversal of the display - Fig. 10
To activate this function, press UP
B
and DOWN
C
keys simultaneously while the display is in the rest mode. This status will be memorised and
maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.
Setting the projector starting address
On each projector, the starting address must be set for the control signal (addresses from 1 to 512).
The address can also be set with the projector switched off.
If there is no DMX input signal, the display will show "No signal".
IMPO TANT: If there is no DMX input signal the address displayed blinks.
10
Functions of the buttons - Using the menu
Setting addresses and options with the projector disconnected
The projector DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press
RIGHT
E
to momentarily activate the display and thus access the settings. Once the required operations have been
carried out, the display will switch off again after a wait time of 30 seconds.
USING THE MENU:
1) Press LEFT
D
once – “Main Menu” appears on the display.
2) Use the UP
B
and DOWN
C
keys to select the menu to be used:
• Setup (Setup Menu): To set the setting options.
• Option (Option Menu): To set the operating options
• Information (Information Menu): To read the counters, software version and other information.
• Manual Control (Manual control Menu): To trigger the test and manual control functions.
• Test (Test Menu): To check the proper functioning of effects
• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for trained technical personnel.
3) Press
F
to display the first item in the selected menu.
4) Use the UP
B
and DOWN
C
keys to select the MENU items.
Confirms the displayed value, or activates the displayed function, or enters the successive
menu.
Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.
Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.
Return to the top level
Commute from units, tens, hundreds, in the "Address" and "Calibration" menù.
F
C
DOWN
B
UP
D
LEFT
E
RIGHT
7
SHARPY PLUS AQUA
WA NING
- IP 65 fixture
- Failure to completely remove power from fixture prior to servicing can lead to serious injury or death.
For additonal service information please contact [email protected]
IMPO TANT
The screws to be removed have rubber sleeve gaskets at the threaded end of the screw. DO NOT LOOSE these. They must be reinstalled when
reassembly is done. If these rubber sleeve gaskets are damaged, they must be replaced with exact original equipment (OE) parts, we also suggest to
replace the rubber sleeve gasket every 2 years.
To maintain IP65 rating each cover has rubber gasket on it. If any rubber gasket is lost or damaged, it must be replaced by an original equipment
(OE) part. We also suggest to replace the rubber sleeve gasket every 2 years.
2
3
4
1
2
11 12
Continue ➔
4. MAINTENANCE
4.1 Opening the covers
Upper Side
Lower Side
2
1
8
SHARPY PLUS AQUA
13
Periodical cleaning - Fig. 13
To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the
working environment (air humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended
that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:
•General cleaning of internal parts.
•Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.
•General visual check of the internal components, cabling, mechanical parts, etc.
•Electrical, photometric and functional checks; eventual repairs.
NOTE: keep a careful cleaning of the ''CMY/colour filters assembly'' to prevent rapid deterioration.
4.2 Periodical cleaning
9
SHARPY PLUS AQUA
Continue ➔
4.3 Effect module removal
1
Lower side
2
Extraction of the effect modules - Fig. 14.
IMPO TANT: Grasp the modules using the support structure and not the details which could get damaged.
Insertion of the effect modules: Repeat the operations indicated in Fig. 13, 14 and 15 in reverse order.
NOTE:
- Do not disconnect wiring harnesses when the fixture is switched on, to avoid to damage electronic boards.
- Do not switch on the fixture with wiring harness disconnected.
14
1
2
4
3
5
6
7
ADJUST
9
9
ADJUST
8
Lamp change - Fig 14.
Take the new lamp out of its package and insert it in the fitting.
WA NING: do not touch the lamp envelope with bare hands. Should this happen, clean the bulb with a cloth soaked in alcohol and dry it
with a clean, dry cloth.
Lamp adjustment
To adjust the lamp position move the 2 screw as shown in the picture.
WA NING: The lamp must be adjusted with the projector switched o . A ter adjusting, close the e ect covers, switch on the projector and check
that the adjustment has been correctly made. I necessary, switch o the projector, remove the e ects covers and repeat lamp adjustment.
EMA K:
- Lifetime of the lamp will be influenced by the switching cycle.
- After a successful starting, attempt to keep the lamp burning for at least 15 minutes in order to complete the chemical cycle of the
lamp to secure the lifetime.
- After switching-off the lamp wait at least 2 minutes before switching it on again.
14
10
SHARPY PLUS AQUA
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Claypaky Matériel de DJ
Claypaky
Claypaky MINISCAN HPE HTI 300W/DX Manuel utilisateur
Claypaky
Claypaky ALPHA WASH EASY 1200 Manuel utilisateur
Claypaky
Claypaky IGLOO Manuel utilisateur
Claypaky
Claypaky SCENIUS UNICO Manuel utilisateur
Claypaky
Claypaky ACTORIS PARLED Manuel utilisateur
Claypaky
Claypaky Mini-B Manuel utilisateur
Claypaky
Claypaky ALPHA PROFILE 1500 Q Manuel utilisateur
Claypaky
Claypaky REFLEXCTXION Manuel utilisateur
Claypaky
Claypaky ALPHA PROFILE 700 Manuel utilisateur
Claypaky
Claypaky COLOUR WHEEL for VIP 1200 Manuel utilisateur
Claypaky
Claypaky Glow Up C71050 Manuel utilisateur
Claypaky
Claypaky AXCOR PROFILE 900 Manuel utilisateur
Claypaky
Claypaky GLOW UP STRIP 100 Manuel utilisateur
Claypaky
Claypaky IGLOO WL Manuel utilisateur
Claypaky
Claypaky ASTRORAGGI POWER HSR 400 Manuel utilisateur
Claypaky
Claypaky C52151 Manuel utilisateur
Claypaky
Claypaky POINT Manuel utilisateur
Claypaky
Claypaky HY B-EYE K15 Manuel utilisateur
Claypaky
Claypaky K-EYE K10 HCR Manuel utilisateur
Claypaky
Claypaky Midi-B Manuel utilisateur
Manuels Matériel de DJ populaires d'autres marques
thomann
thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur
Eagletone
Eagletone 6 Eyes Flower Manuel utilisateur
EuroLite
EuroLite FLD-1508 Manuel utilisateur
Technical Pro
Technical Pro LG8xSEA Manuel utilisateur
JB Systems
JB Systems Lounge Laser DMX Manuel utilisateur
Lightmaxx
Lightmaxx Vega Halo 90 Manuel utilisateur
Elation
Elation FUZE WASH Z350 Manuel utilisateur
Maverick
Maverick MK3 WASH Manuel utilisateur
Infinity
Infinity TF-260C7 Fresnel Manuel utilisateur
Chauvet
Chauvet EVE E-50Z Manuel utilisateur
Eliminator Lighting
Eliminator Lighting E 138 Manuel utilisateur
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur