Clarke LED700SR Manuel utilisateur

USER INSTRUCTIONS

ORIGINAL INSTRUCTIONS GC08/23

LED WORKLIGHT

MODEL NO: LED700SR

PART NO: 4003538

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE worklight.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

TECHNICAL INFORMATION

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase. This guarantee is invalid if the product is found

to have been abused or tampered with in any way, or not used for its

intended purpose.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect your

statutory rights.

Model LED700SR

Operating voltages 3.7V (light), 230V (charger)

Rated input power 7W

LED replaceable No

Rechargeable Lithium battery pack 3.7V / 6000 mAh

Lighting source COB 6W

Light output (luminous flux) 150-700 Lumen (20-100%)

Colour temperature (rendering) 5500-6800K

Battery charging time 4-5 hours

Approximate run time 3-13 hours

Rated lamp lifetime 30,000 hours

Efficiency (Lm/W) 150

Ingress protection rating IP67

Operating temperatures -10 to +40oC

Dimensions (H x W x D) mm Worklight - 45 x 200 x 63

Docking Station - 65 x 180 x 118

Weight Worklight - 400g

Docking Station - 260g

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

1. DO NOT shine the worklight into anyone’s eyes.

2. Ensure the worklight is fully charged before initial use.

3. DO NOT use the worklight during recharging.

4. DO NOT use if you suspect that the battery or the casing is damaged.

5. Inspect the charger plug, cable & connector for damage to ensure items

are safe before connecting to the power supply. If damaged DO NOT use.

6. Check that the input voltage marked on the charger plug is the same as

the mains power supply to be used.

7. DO NOT disassemble the worklight for any reason.

8. DO NOT pull the charger from the mains socket by the lead.

9. DO NOT get the charger wet, or use in wet, damp conditions (the charger

is for indoor use only).

10. Never use any charger other than the one supplied with this product when

connecting to the power supply.

The following symbols may be displayed on the machine or its packaging.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste but according to the laws governing Waste Electrical and

Electronic Equipment (WEEE) at a recognised disposal facility.

The light source contained in this worklight has a life expectancy of

approximately 30,000 hours after which the worklight should be disposed of in

an environmentally responsible way.

The Lithium Ion battery falls under the Waste Batteries and Accumulators

Regulations 2009 and should be disposed of in a controlled manner.

May interfere with

pacemakers

Battery may be harmful to

aquatic or other life

Caution when disposing of

inflamable battery

Danger-explosive battery

materials

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

FEATURES & OPERATION

BATTERY CHARGING

1. Plug the docking station charging cable into a 230V power socket.

• The charge indicator turns red if charging the battery is desirable.

If the light is not being used for a long time keep it fully charged. Charging and

discharging at intervals of max 3 months helps to maintain performance.

BATTERY INDICATOR

The battery level LED indicator is on back of the worklight: Green = fully

charged / yellow = 50% / red = low

CHARGING INDICATOR

Charging status LED is displayed on the docking station: Red = charging /

Green = fully charged

• The worklight should not be operated while using the charger.

2. If you plan to store the worklight (e.g. for emergencies), we recommend

that the battery is fully charged before doing so. This will ensure the longest

possible battery life.

3. NEVER abuse the charger cable or yank the cable to disconnect it. Keep

the cable away from sharp edges/hot surfaces.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SWITCHING ON AND OFF

1. Press the power button once to turn the main light ON.

2. Press the power button twice to turn the main light OFF.

3. Press and hold the power button while the main light is on to start dimming.

To release, press and hold again to increase.

• Lowest and highest levels are indicated by flashing of the light until

the button is released.

• When the lamp is turned off it will remember the main light setting.

4. Attach the worklight to a suitable support using either the folding or

extending hook or attach to a ferrous metal surface using the magnet.

PAIRING

The light has been ‘paired’ to the docking station before leaving factory.

Please pair or remove pairing as per the following steps if needed.

1. When ‘pairing’, press and hold the power button on the light until the red

indicator lights up, then release.

2. Press the ‘call’ button on the dock station until the green indicator colour

changed, the red indicator on the light starts to flash simultaneously and

turns off.

3. To remove pairing, press and hold the power button on the light. The LED

indicator will be red, flashing and off.

FIND MY LIGHT FUNCTION

When you want to find the light that has been misplaced, press the dock call

button and release. You will hear beeps from the light and the light will flash.

Press the power button on the light to turn the alarm off.

• The ‘Find My Light’ function will not work once the light has no power

and may not work if the light is beyond 20 meters from the dock.

CARE & STORAGE

1. When not in use, switch off & unplug from the power supply. Store in a

secure, dry place, out of the reach of children. DO NOT leave it exposed to

the elements and avoid direct sunlight, direct heat, rain/moisture etc.

2. DO NOT use solvents, thinners or alcohol for cleaning, as these will damage

the finish. With the worklight unplugged, use a dry cloth to wipe the parts.

3. The LED light source cannot be replaced but has a life expectancy of

approximately 30,000 hours.

4. DO NOT attempt to repair this product or attempt any electrical repair

yourself. Consult the Clarke Service Department on 020 8988 7400.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

COMPONENT PARTS

Item Description Item Description Item Description

1 Top Hook 8 Lamp Panel 15 Hook

2 Cover 9 Heat Sink 16 Bottom Cap

3 Top Cap 10 Battery Sleeve 17 Docking Bracket

4 Circuit Board 11 Lithium Battery 18 Back Shell

5 Moulded Shell 12 Bracket 19 Docking Circuit

6 Angle Ratchet 13 Lower Cap 20 Front Shell

7 Reflector 14 Magnetic Base 21 Switch

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DECLARATIONS OF CONFORMITY

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Clarke Lampe de travail

Clarke

Clarke MFL800R Manuel utilisateur

Clarke

Clarke COB10T Manuel du propriétaire

Clarke

Clarke HLC400T Manuel du propriétaire

Clarke

Clarke HLC400/110 Manuel du propriétaire

Clarke

Clarke CL6FS Manuel utilisateur

Clarke

Clarke COB10CR Manuel utilisateur

Clarke

Clarke SMD42T Manuel du propriétaire

Clarke

Clarke CWLCOB3 Manuel utilisateur

Clarke

Clarke RWL36LI Manuel utilisateur

Clarke

Clarke RWL30 Manuel utilisateur

Clarke

Clarke LED1000R Manuel utilisateur

Clarke

Clarke GWL700R Manuel utilisateur

Clarke

Clarke HLC400 Manuel du propriétaire

Clarke

Clarke SMD42T/110 Manuel du propriétaire

Clarke

Clarke COB10C Manuel du propriétaire

Clarke

Clarke SMD84T/110 Manuel du propriétaire

Clarke

Clarke SMD42C Manuel du propriétaire

Clarke

Clarke PL5R Manuel utilisateur

Clarke

Clarke CTL24/3 Manuel utilisateur

Clarke

Clarke SMD84T Manuel du propriétaire

Clarke

Clarke SMD2700L Manuel utilisateur

Clarke

Clarke COB10C/110 Manuel du propriétaire

Clarke

Clarke HLC400T/110 Manuel du propriétaire

Clarke

Clarke SMD4500 Manuel utilisateur

Manuels Lampe de travail populaires d'autres marques

ANSMANN

ANSMANN POWERLIGHT 5.1 Manuel utilisateur

RTRMAX

RTRMAX RTX1868 Manuel utilisateur

FeinTech

FeinTech LAL00220 Manuel utilisateur

Bunker Hill Security

Bunker Hill Security 64735 Manuel utilisateur

Goobay

Goobay 30450 Manuel utilisateur

REV Ritter

REV Ritter SPOT Manuel utilisateur

Ignition

Ignition Stagepix Line 100 IP Manuel utilisateur

SCANGRIP

SCANGRIP DUO CONNECT Manuel utilisateur

Bosch

Bosch GLI 18 V Manuel utilisateur

Bayco

Bayco SL-1514 Manuel utilisateur

EUFAB

EUFAB SMD LED 8+1 Manuel utilisateur

DeWalt

DeWalt DCL510 Manuel utilisateur

PowerSmith

PowerSmith PWLD080T Manuel utilisateur

MaxLite

MaxLite 73683 Manuel utilisateur

Heitronic

Heitronic Trend 27867 Manuel utilisateur

Monzana

Monzana Gore MZCL10 Manuel utilisateur

EINHELL

EINHELL TE-CL 18/2000 LiAC Manuel utilisateur

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur