Clarke FP150 Manuel utilisateur

OPERATING INSTRUCTIONS

GC0911

FOOT PUMPS

MODEL NOS: FP150 & FP300

Part Nos: 7640265 & 7640270

Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Foot Pump.

Before attempting to use the product, it is essential that you read this manual

thoroughly and carefully follow all instructions given. In doing so you will

ensure the safety of yourself and that of others around you, and you can also

look forward to the product giving you long and satisfactory service.

ENVIRONMENTAL PROTECTION

Do not dispose of this product with general household waste. All tools,

accessories and packaging should be sorted, taken to a re-cycling centre

and disposed of appropriately.

GENERAL SAFETY PRECAUTIONS

1. Always thoroughly familiarise yourself with this product & its operation, and

always read and understand the instructions and warnings in this manual

before using the product.

2. Never allow children to use the foot pump.

3. Never over-inflate tyres, toys, balls, lilos etc.

4. Always use in a safe area away from traffic and other hazards.

5. Always ensure that tyre pressure checks are carried out to the tyre

manufacturers recommended pressures.

6. Never overstretch the connecting hose.

USING THE PUMP

WARNING: THE GAUGE IS ONLY TO BE USED AS A REFERENCE, ALWAYS

CARRY OUT A FINAL CHECK OF THE TYRE PRESSURE WITH A GAUGE

CONFORMING TO BS EN 12645.

TYRE INFLATION

1. Fully extend the hose and fix the tyre valve connector onto the vehicle

tyre valve with the thumb lock, ensuring the valve is clean.

• When connected correctly, the gauge will show the current

pressure in the tyre. If this is the correct tyre pressure as stated in

your vehicle handbook, remove the valve connector.

2. If the tyre is below the recommended pressure (as specified in your

vehicle handbook), operate the pump until the pressure is achieved.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

ADAPTORS

The pump is supplied with four adaptors for different uses. These are provided

to inflate sports balls, air beds, small inflatables, bicycle and vehicle tyres etc.

To avoid over-inflation, always follow manufacturer’s instructions for the item

to be inflated.

Inflatable adaptor

Toy/air bed adaptor

Sports ball adaptor

‘Presta’ bicycle tyre valve adaptor

MAINTENANCE

Always inspect the pump before use to ensure the connecting hose is in

perfect condition. Keep the pump clean by wiping with a dry cloth. DO NOT

use solvent as a cleaning agent. Always store in a dry place.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of

12 months from the date of purchase. Please keep your receipt as proof of

purchase. This guarantee is invalid if the product is found to have been

abused or tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect

your statutory rights.

SPECIFICATIONS

FP150 FP300

Dimensions L x D x H 350 x 90 x 640 mm 335 x 150 x 265 mm

Weight 1.1 kg 1.7 kg

Hose Length 630 mm 650 mm

Pressure Gauge Scale 1: 0-100 psi Scale 1: 0-100 psi

Scale 2: 0-7 bar Scale 2: 0-7 bar

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Clarke Pompe à eau

Clarke

Clarke PW2 Mode d’emploi

Clarke

Clarke CPE15A1 Mode d’emploi

Clarke

Clarke IVP13A Manuel d'installation et d'exploitation

Clarke

Clarke DW75 Mode d’emploi

Clarke

Clarke GSE1 Mode d’emploi

Clarke

Clarke DW50 Mode d’emploi

Clarke

Clarke PW50A Mode d’emploi

Clarke

Clarke PSV3A Manuel d'installation et d'exploitation

Clarke

Clarke SWP900A Mode d’emploi

Clarke

Clarke CPE20A3 Mode d’emploi

Clarke

Clarke DWP300A Mode d’emploi

Clarke

Clarke C10 Manuel

Clarke

Clarke CSE400A Manuel d'installation et d'exploitation

Clarke

Clarke CRWP1 Manuel utilisateur

Clarke

Clarke PSP195 Mode d’emploi

Clarke

Clarke HIPPO Jr Manuel d'installation et d'exploitation

Clarke

Clarke CVPW Guide rapide

Clarke

Clarke ISP10A Manuel d'installation et d'exploitation

Clarke

Clarke PSV1A Mode d’emploi

Clarke

Clarke MSP12 Manuel utilisateur

Clarke

Clarke Hippo 2A Manuel

Clarke

Clarke CPCDP500 Mode d’emploi

Clarke

Clarke PSV3A Mode d’emploi

Clarke

Clarke PF75 Mode d’emploi

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur