Clarke CWB80B Manuel utilisateur

ASSEMBLY INSTRUCTIONS

GC05/12

Workbench with Cabinet

Model: CWB80B

Part No: 4800110

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE product. Before assembling the

workbench/tool cabinet, be sure to read these instructions thoroughly. In

doing so you will ensure the safety of yourself and of others around you, and

you can look forward to the product giving you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of

12 months from the date of purchase. Please keep your receipt as proof of

purchase. This guarantee is invalid if the product is found to have been

abused or tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

CONTENTS

Open the carton and lay out the components carefully, identifying them

according to the parts list and diagram on pages 6 and 7.

Should any part be damaged or missing, please contact your Clarke dealer

immediately for replacement.

Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]

ASSEMBLY

The cabinet body is constructed from 5 panels plus the door. The top and

bottom panels are identical, as are the side panels. Care must be taken to

ensure they are assembled correctly by taking note of the instructions and

referring to the appropriate diagram.

All fixing screws should be entered from the outside and secured on the inside

by the flat washers and nuts provided.

Assembly should be carried out with all nuts finger tight only - DO NOT tighten

the nuts until the structure is fully assembled as described in the instructions.

You will find it easier and more comfortable to assemble the cabinet,

complete with legs, on a workbench. Additionally, it is easier and quicker if an

assistant screws on the nuts from inside the cabinet whilst the screw is held on

the outside.

NOTES:

1. Assembly is simplified if an extra pair of hands is available.

2. All fixing screws should be finger tight ONLY, until the complete structure is

assembled.

3. Assemble on a workbench with suitable free working area.

The assembly procedure is as follows:

THE CABINET

The front of each panel is the end

where a channel is formed, as

shown in fig 1.

1. Lay one such panel, (channel

down), with a side panel

positioned alongside as shown.

The bottom panel should sit on

top of the lower lip of the side

panel.

2. Secure with two screws, flat

washers and nuts.

3. Attach the opposite side panel

in a similar manner.

FIG 1

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

4. Locate the door lower hinge pin into the

hole in the lower panel, then place the top

panel on top of the two side panels as

shown in Fig 2, locating the door top hinge

pin in the hole in the upper panel as you

do so.

Secure the panel to the sides with screws,

nuts & washers in the holes shown arrowed

in Fig 2.

5. Position the structure so that the front of it

hangs over the edge of your workbench so

that you can easily bolt on the front right

hand leg, as indicated in Fig 3.

6. Before you can bolt on the front left hand

leg, the door closing plate must first be

bolted to it. This is also indicated in Fig.3.

Bolt on the retaining plate using the centre

hole only at (A), then offer up

the leg to the box and fit the

bolts at the top and bottom (B),

and finally on to the right hand

side panel (C).

7. With the two front legs bolted

on, turn the structure so that it is

lying on one side.

Place the back panel in

position and hold in place by

entering a screw through the

centre hole only on the top and

bottom panels, and securing

with a washer and nut from

inside the box.

8. Bolt on the rear leg.

9. Turn the structure over onto its opposite side and bolt on the other leg.

10. Stand the structure on its feet and rock it to ensure that no particular part

is under strain, and so that it stands evenly. Check the angle which the top

and bottom panels make with ther side panels using the door as a

template....(it should be right angles). If not adjust the structure by hand,

so that it is square, then proceed to tighten all the securing nuts.

11. Finally place the structure on its feet and test for stability, adjust the bolts,

as necessary, and secure by tightening the nuts.

FIG 3

FIG 2

Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]

THE TABLE TOP

1. Turn the table top face down and attach the two drawer runners as

shown in fig 4, using three screws each side, entering them in the pre-

drilled holes in the tabletop.

2. The table is now ready to

be assembled to the

cabinet.

3. With the table top

remaining face down,

position the cabinet on

top, with the feet

uppermost.

NOTE: The front of the table top is the edge closest to the drawer runners. Take

care to align this with the front of the cabinet.

4. Line up the holes in the legs with the pre-drilled holes in the table top, and

locate with screws. Tighten fully.

5. Turn the structure back onto its feet.

THE DRAWER

The drawer comprises:

2 x Side panels, I x Front panel, 1 x Back panel, 1 x Bottom panel

1. Having identified the various parts as in Fig 5, bolt the side panels to the

front panel as shown, then add the back panel with all screws only finger

tight.

2. Drop in the bottom panel and

secure with screws, nuts and

washers.

3. Ensure the drawer is square

before tightening all the nuts.

4. Slide the drawer into place

beneath the table.

Your workbench is now fully

assembled and ready for use.

FIG 5

FIG 4

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

PARTS DIAGRAM

Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]

metI noitpircseD ytQ oNtraP

1poTelbaT110B08BWCAG

2rennuRrewarD220B08BWCAG

3lenaPmottoB/poT230B08BWCAG

4lenaPediSdnaHthgiR/tfeL240B08BWCAG

5lenaPra

eR150B08BWCAG

6dradnats-geL360B08BWCAG

7tnorFdnaHtfeL-geL170B08BWCAG

8lenaProoD180B08BWCAG

9bat&syekw/cylbmessAkcoLro

oD190B08BWCAG

01mottoBrewarD1010B08BWCAG

11tnorFrewarD111B08BWCAG

21kcaBrewarD121B08BWCAG

31ediSrewarD231B08BWCAG

41wercs

dooW41a/n

51tloB44a/n

61tuN44a/n

71rehsaWtalF44a/n

81etalPgnisolCrooD181B08BWCAG

PARTS LIST

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Clarke Rangement des outils

Clarke

Clarke CWB1205P Manuel utilisateur

Clarke

Clarke CWB114 Manuel utilisateur

Clarke

Clarke CWB1630R Manuel utilisateur

Clarke

Clarke CMUS3 Manuel utilisateur

Clarke

Clarke CERT1225 Manuel utilisateur

Clarke

Clarke CWB1000 Manuel utilisateur

Clarke

Clarke CWB300 Manuel utilisateur

Clarke

Clarke CWB2001P Manuel utilisateur

Clarke

Clarke CWB1250 Manuel utilisateur

Clarke

Clarke CWB300LS Manuel utilisateur

Clarke

Clarke CWB57 Manuel utilisateur

Clarke

Clarke PC4 Manuel utilisateur

Clarke

Clarke CPF13 Guide de dépannage

Clarke

Clarke CWB1200E Manuel utilisateur

Clarke

Clarke CWB1201E Manuel utilisateur

Clarke

Clarke CMPW1 Manuel utilisateur

Clarke

Clarke CWB1700P Manuel utilisateur

Clarke

Clarke CWB1530 Manuel utilisateur

Clarke

Clarke Metalworker CBGS2 Manuel utilisateur

Clarke

Clarke CWB1500D Manuel utilisateur

Clarke

Clarke CWB1250 Manuel utilisateur

Clarke

Clarke CHB1500 Manuel utilisateur

Clarke

Clarke CWC38 Manuel utilisateur

Clarke

Clarke CWBR1B Manuel utilisateur

Manuels Rangement des outils populaires d'autres marques

Ryobi

Ryobi RWB03 Manuel utilisateur

Husky

Husky H27CH5TR4BGK Manuel utilisateur

Scheppach

Scheppach ts 2100 Manuel utilisateur

Cornwell Tools

Cornwell Tools CTB360AKBK Manuel utilisateur

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuel utilisateur

Cassese

Cassese CS200 CART Manuel utilisateur

Kendall Howard

Kendall Howard ESDW-9630-1000 Manuel utilisateur

Lista

Lista Align Instructions de montage

Workzone

Workzone 99609 Manuel utilisateur

Stanley

Stanley STST83800-1 Manuel utilisateur

Homak

Homak PROFESSIONAL Series Manuel du système

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manuel utilisateur

Husky

Husky H5CH2R Manuel utilisateur

BGS technic

BGS technic 4107 Manuel utilisateur

Ryobi

Ryobi RWB02 Manuel utilisateur

Husky

Husky H52CH6HDV3WHT Manuel utilisateur

Sealey

Sealey PTB66004 Manuel utilisateur

General International

General International Excalibur 40-100 Manuel de la liste des pièces