SpectraldenCITOmeter
Service
CITO-SYSTEM GmbH • Haimendorfer Str. 37+46 • 90571 Schwaig bei Nürnberg/Germany
Battery low
If BAT appears on the LCD, change the batteries. Open the battery cover and
replace batteries with 2 AA (LR6) 1.5V standard batteries.
Measurement time was too short
Keep device in front position until the measurement value appears.
Cleaning
The SpectraldenCITOmeter casing can be cleaned with a dry cloth.
Important: This manual describes the current version of the SpectraldenCITOmeter
hardware and software. Future enhancements or modications are reserved.
Safety Instructions
For safety reasons it is absolutely necessary to read through the user‘s guide and
all of the instructions it contains. If the safety recommendations and instructions
in this user guide are not complied with, measurement errors or data loss or
physical injury or property damage may result.
• SpectraldenCITOmeter is not intrinsically safe. Therefore the device cannot
be used in an environment with explosive vapors where there is a risk of
spark ignition or in an area with strong electromagnetic elds. It should be
protected against chemicals, corrosive vapors, strong mechanical vibrations
and impacts.
• Use the SpectraldenCITOmeter in ambient temperatures between 15 °C
(59 °F) and 40 °C (104 °F), and do not expose to direct sun light.
• The SpectraldenCITOmeter should never be opened as there are no user
serviceable parts. Doing so voids the guarantee. Contact your authorized
dealer if repairs are necessary.
• To avoid incorrect handling, the SpectraldenCITOmeter should only be used
by trained personnel.
• Use original spare parts and accessories only. Contact your authorized dealer.
• Use the original packaging exclusively when transporting.
1.28
BAT
---
MEA00077
MEA00077-NR-2014-07-EN
