Citizen H504 Manuel utilisateur

CONTENTS

1. Features ..................................................................................................... 3

2. Before Using .............................................................................................. 4

3. Displays and Buttons ................................................................................ 5

4. Functions Unique to Solar-Powered Watches ........................................ 6

• Insufficient Charging Warning Feature

• Quick Start Feature

• When the Watch has Stopped due to Insufficient Charging

• Overcharging Prevention Feature

5. General Reference for Charging Times ................................................. 11

6. Handling Precautions ............................................................................. 12

• Try to Keep the Watch Charged at all Times

7. Replacing the Secondary Battery .......................................................... 14

8. Setting the Time and Date ...................................................................... 15

• Setting the Time

• Setting the Date

9. Using the Chronograph .......................................................................... 18

10.Zero Positioning of Chronograph Second Hand .................................. 20

11.Precautions .............................................................................................. 22

12.Specifications .......................................................................................... 28

1. Features

This watch is a solar-powered watch that contains a solar cell in its face that

drives the watch by converting light energy into electrical energy. It is equipped

with features including a 24 hour display and chronograph function that allows

measurement of time in 1 second units up to 60 minutes.

English

2. Before Using

This watch is a solar-powered watch. Please fully charge the watch before

using by exposing it to light.

A secondary battery is used in this watch to store electrical energy. This

secondary battery is a clean energy battery that does not contain mercury or

other toxic substances. Once fully charged, the watch will continue to run for

about five months without additional charging.

To use this watch comfortably, make sure to recharge it before it stops running

completely. Since there is no risk of overcharging (Overcharging Prevention

Feature), it is recommended that the watch be recharged everyday.

3. Displays and Buttons

Hour hand

Chronograph minute

hand

Second hand

Date

Button (B)

24 hour hand

Crown

Minute hand

Button (A)

Chronograph second hand

The design varies depending on the model.

4. Functions Unique to Solar-Powered

Watches

When the watch becomes

insufficiently charged, the

following warning features

will be activated to inform

the wearer that the watch

is insufficiently charged.

[Normal Time Display]

[Insufficient Charging Warning Feature]

The second hand switches from 1-second

interval movement to 2-second interval

movement

[Stopped]

All hands stop moving

If insufficiently

charged If watch is continued to be

used without charging

The watch hands resume 2-second interval movement when the watch is charged by

exposing to light. However, the time is incorrect as a result of the watch having stopped

due to being insufficiently charged. Sufficiently charge the watch until it resumes 1-

second interval movement and reset the time before use.

If charged

2 seconds

[Insufficient Charging Warning Feature]

When the capacity of the secondary battery decreases as a result of light not

shining on the solar cell, the second hand switches from 1-second interval

movement to 2-second interval movement (insufficient charging warning

feature). Although the watch continues to keep time accurately at this time, the

watch stops after about 5 days have elapsed after the second hand has

switched to 2-second interval movement. When this happens, charge the

watch by exposing it to light until the second hand returns to 1-second interval

movement.

Notes: • During chronograph

measurement, measurement

stops and the chronograph

second hand is reset to the 0

seconds position.

• The chronograph minute hand

stops at any arbitrary position.

Return it to the 0 minutes position

by pressing button (B).

[Quick Start Feature]

If the watch has stopped as a result of being insufficiently charged, the second

hand will begin 2-second interval movement and the watch will begin to run

about 10 seconds after the watch is exposed to light (approx. 500 lx). (The

time until the hands begin to move varies depending on the model.) Please

note, however, that the watch will stop again if the watch is blocked from the

light and is not sufficiently charged.

2-second interval movement

1110

[When the Watch has Stopped due to Insufficient Charging]

When the capacity of the secondary battery decreases as a result of the solar

cell not being exposed to light, the watch will stop due to being insufficiently

charged. The Quick Start Feature will be activated and the hands will begin to

move if the solar cell is exposed to light. Sufficiently charge the watch by

exposing to light so that it returns to the normal time display (1-second interval

movement).

Note: • The time is incorrect when the watch has stopped as a result of being

insufficiently charged even if the watch starts to run. Reset the watch

to the correct time before using.

[Overcharging Prevention Feature]

The overcharging prevention feature is activated when the secondary battery is

fully charged so that it is not charged further.

5. General Reference for Charging Times

Recharging time varies according to the watch model (such as the color of the dial). The

times in the table below should therefore only be used as a rough reference.

* Charging time refers to the amount of time during which the watch is continuously

exposed to light.

Illuminance

(lx)

500

Environment

Inside an ordinary office

Charging time (approximate)

3.5 hours 45 hours

Charging time from the

stopped state to normal

hand movement

(1-second interval

movement)

Full charge time

-----

1,000

Under a fluorescent lamp (30 W) at

a distance of 60-70 cm (24-28 in)

2 hours 19 hours -----

3,000 Under a fluorescent lamp (30

W) at a distance of 20 cm (8 in) 35 minutes 6 hours 110 hours

10,000 Outdoors, cloudy 11 minutes 2 hours 30 hours

100,000 Outdoors, summer and sunny

under direct sunlight 3 minutes 18 minutes 12 hours

One day usage

Full charge time: Time to fully recharge the watch after it has stopped.

One day usage: Time required for recharging the watch to run for 1 day with normal hand movement

(1-second interval movement).

1312

6. Handling Precautions

Please note that if you wear long sleeves, the watch can easily become

insufficiently charged as a result of the watch being covered and not being

exposed to light. The watch will continue to run properly if it is placed in as

bright a location as possible even when not being worn.

Charging Precautions

• Allowing the watch to reach high temperatures during recharging can

damage the watch. Avoid recharging in locations that can reach high

temperatures (about 60°C /140°F or higher).

Examples: • Charging by placing the watch in close proximity to a light source

that easily becomes hot such as an incandescent lamp or

halogen lamp.

• Charging the watch in a location that can easily become hot

such as on an automobile dashboard.

• When charging using the light from an incandescent lamp, charge while

being careful that the watch does not become excessively hot by placing at a

distance of at least 50 cm (20in) from the lamp.

Handling of Secondary Battery

• Please do not attempt to remove the secondary battery from the watch.

• If the secondary battery has been unavoidably removed, store it in a location

out of the reach of small children to prevent accidental swallowing.

• If the secondary battery should happen to be swallowed, please consult a

physician and seek medical attention immediately.

Only Use the Specified Secondary Battery

• Never use a secondary battery other than the secondary battery used in this

watch. Although the watch is designed not to operate if another type of

secondary battery is installed, since this may result in overcharging that can

cause the secondary battery to rupture, there is the risk of both damage to

the watch and injury to the wearer.

• Only use the specified secondary battery when replacing the secondary

battery.

8. Setting the Time and Date

In the case the crown is of the screw-lock type, loosen the screw by turning the

crown to the left before operating the crown, and after having returned the

crown to the normal position following operation, turn it to the right while

pushing it in to securely retighten it.

Hour hand

Second

hand 24 hour hand

Time

correction

position

Minute hand

[Setting the Time]

1. Pull the crown out to the time

correction position when the second

hand has reached the 0 seconds

position.

2. Turn the crown to set the time.

• The 24 hour hand moves in

conjunction with the hour hand. Pay

attention to AM and PM when setting

the time.

3. Securely return the crown to the

normal position in synchronization with

a telephone or other time service.

7. Replacing the Secondary Battery

Unlike ordinary silver-based batteries, the secondary battery used in this watch

does not have to be periodically replaced since it is able to be charged and

discharged repeatedly.

1716

[Hint for Accurately Setting the Time]

After stopping the second hand at the 0 seconds position, turn the minute hand

4-5 minutes past the correct time and then turn it back to the correct time. The

time on the watch can then be set to the correct time by pushing in the crown in

synchronization with a time service tone.

[Setting the Date]

1. Pull the crown out to the date correction

position.

2. Turn the crown to the right to set the date.

• The crown turns freely and the date does

not change if the crown is turned to the left.

• If the date is set while the time on the

watch is between the hours of about 9:00

PM and 1:00 AM, the date may not change

on the following day. If this happens, set

the date after temporarily moving the hands

to a time other than between the above

times.

• The date is based on a 31-day calendar. The date must be changed from

the last day of the month to the first day of the following month for those

months not having 31 days (months having 30 days and February).

• The date changes at around 12:00 AM.

3. Once the date has finished being set, return the crown to the normal

position.

Date correction position

Date

1918

9. Using the Chronograph

The chronograph function of this watch is able to measure and display elapsed

time up to 59 minutes, 59 seconds in 1 second units. After 60 minutes have

elapsed, each of the chronograph hands automatically stop at the 12:00

position.

[Chronograph Timing]

1. Start timing by pressing button (A).

• The chronograph is repeatedly started and

stopped by pressing button (A).

2. Pressing button (B) resets the chronograph

to 0 seconds.

Note: • Do not subject the chronograph to strong impacts while chronograph

timing is in progress. Subjecting the watch to a strong impact during

chronograph timing or when the chronograph has stopped

automatically after 60 minutes have elapsed can cause the

chronograph minute hand to shift out of position. If this happens, press

button (B) to reset to the 12:00 position before using the chronograph

again.

Chronograph

second hand

Button (A)

(A) (A)

(A)

(B) (B)

Button (B)

Chronograph

minute hand

Reset

Time

Measurement

Stop

Autres manuels pour H504

Table des matières

Autres manuels Citizen Montre

Citizen

Citizen B11 Manuel utilisateur

Citizen

Citizen QUARTZ Eco-Drive CTZ-B6902 Manuel utilisateur

Citizen

Citizen Eco-Drive F150 Manuel utilisateur

Citizen

Citizen AV0025-51A Manuel utilisateur

Citizen

Citizen A414 Manuel utilisateur

Citizen

Citizen G43 Series Manuel utilisateur

Citizen

Citizen 0S00 Manuel utilisateur

Citizen

Citizen YP17747 Manuel utilisateur

Citizen

Citizen F158 Manuel utilisateur

Citizen

Citizen Riva EW0890-58D Manuel utilisateur

Citizen

Citizen 0S21 Manuel utilisateur

Citizen

Citizen 0S80 Manuel utilisateur

Citizen

Citizen 8205 Manuel utilisateur

Citizen

Citizen 6P80 Manuel utilisateur

Citizen

Citizen 6P05 Manuel utilisateur

Citizen

Citizen B080 Manuel utilisateur

Citizen

Citizen 6P57 Manuel utilisateur

Citizen

Citizen Eco-Drive E310 Manuel utilisateur

Citizen

Citizen 0S11 Manuel utilisateur

Citizen

Citizen GL30 Manuel utilisateur

Citizen

Citizen 27 Manuel

Citizen

Citizen C470 Manuel

Citizen

Citizen 8712 Manuel utilisateur

Citizen

Citizen Watch Manuel utilisateur

Manuels Montre populaires d'autres marques

Pandora

Pandora WATCH2 Manuel utilisateur

Casio

Casio QW-4343 Manuel utilisateur

Suunto

Suunto X6 Manuel utilisateur

Seiko

Seiko N830 Manuel utilisateur

MotionX

MotionX 365 Manuel utilisateur

Garmin

Garmin VENU SQ 2 Manuel utilisateur

QCY

QCY Watch GTC Manuel utilisateur

Canyon

Canyon Cindy CNE-KW41WP Manuel utilisateur

Esq

Esq Watches Guide d'installation

Crane

Crane AA5-CDSM-3A Manuel utilisateur

Timex

Timex W-214 Manuel utilisateur

DETOMASO

DETOMASO MATERA Manuel utilisateur

Geemarc

Geemarc Watch N Shake Manuel utilisateur

LORUS

LORUS W590 Manuel utilisateur

STENLILLE

STENLILLE Actío Manuel utilisateur

Casio

Casio 5594 Manuel utilisateur

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuel utilisateur

Slazenger

Slazenger SLZ800 Manuel utilisateur