Citizen 41 series Manuel utilisateur
INSTRUCTION MANUAL
1
Thank you for your purchase of this Citizen watch.
Before using the watch, read this instruction manual carefully to ensure
correct use.
After reading the manual, store it in a safe place for future reference.
Be sure to visit the Citizen website at
https://www.citizenwatch-global.com/
.
Some models may be equipped with enhanced features and functions such
as slide rules and tachymeters. You can also see how to use such features and
functions, which is not covered with the instruction manual, in the web site.
To check the movement number
A case number—4 alphanumeric characters and 6
or more alphanumeric characters—is engraved on
the case back. (Figure on the right)
The first 4 characters of the case number represent
the movement number of the watch. In the example
on the right, “ ” is the movement number.
Engraving position example
The engraving position may
differ depending on watch
model.
2
Safety precautions — IMPORTANT
This manual contains instructions that should be strictly followed at all times
not only for optimal use, but to prevent any injuries to yourself, other persons or
property. We encourage you to read the entire booklet (especially, pages
24
-
33
) and understand the meaning of the following symbols:
■ Safety advisories are categorized and depicted in this manual as follows:
DANGER
Highly likely to cause death or serious injury
WARNING
Can cause serious injury or death
CAUTION
Can or will cause minor or moderate injury or damage
3
■ Important instructions are categorized and depicted in this manual as follows:
(Following symbols are examples of Pictograms.)
Warning (caution) symbol followed by prohibited matters.
Warning (caution) symbol followed by instructions that should be
followed or precautions that should be observed.
Safety precautions
4
CONTENTS
Before using this watch............................
6
Band adjustment........................................
6
Protective stickers.......................................
6
How to use a specially designed crown/button...........
7
Winding the mainspring ...........................
9
Duration and winding number of times of models .......
10
Winding the mainspring manually.......................
11
Setting the time .................................
13
Setting the time (models with no calendar) ..............
15
Setting the time (models with the calendar) .............
16
5
CONTENTS
Adjusting the calendar ...........................
17
About mechanical watches........................
19
Take care of magnetism of your surroundings! ...........
20
Caring of a mechanical watch ...........................
21
Troubleshooting .................................
22
Water resistance.................................
24
Precautionary items and usage limitations ..........
26
Specifications ...................................
34
6
Band adjustment
We recommend seeking the assistance of an experienced watch technician
for sizing of your watch. If adjustment is not done correctly, the bracelet may
unexpectedly become detached leading to loss of your watch or injury (excluding
products containing the band adjustment tool).
Consult an authorized service center.
Protective stickers
Be sure to remove any protective stickers that may be on your watch (case back,
band, clasp, etc.). Otherwise, perspiration or moisture may enter the gaps between
the protective stickers and the parts, which may result in a skin rash and/or
corrosion of the metal parts.
Before using this watch
7
Before using this watch
Continued on the next page
How to use a specially designed crown/button
Some models are equipped with a specially designed crown and/or push button to
prevent accidental operation.
Screw down crown/button
Unlock the crown/button prior to operate your watch.
Unlock Lock
Screw down
crown
Rotate the crown
counterclockwise
until it releases from
the case.
Push the crown in to the
case. With gentle pressure
towards the case, rotate the
crown clockwise to secure
it to the case. Be sure to
tighten firmly.
Screw down
push button
Rotate the
locking screw
counterclockwise,
and loosen until it
stops.
Rotate the locking screw
clockwise, and tighten
firmly.
8
Before using this watch
Recessed button
Press the button with a non-marring narrow-tipped object.
• Metal objects may cause marring or scratching of
the button.
9
This is an automatic mechanical watch powered by a spring.
When wearing the watch, your arm’s movement rotates the oscillating weight to
wind the mainspring automatically.
• When your arm’s movement is small and/or a few, winding will become
insufficient. We recommend to wear the watch as long as possible or wind the
mainspring manually in such cases.
• Duration of movement after the mainspring is wound fully may differ depending
on models. For details, see the next page or "Specifications" (→ page
34
).
Winding the mainspring
Autres manuels pour 41 series
1
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Citizen Montre
Citizen
Citizen G900 Manuel utilisateur
Citizen
Citizen 9075 Manuel utilisateur
Citizen
Citizen PCAT Manuel utilisateur
Citizen
Citizen 0S2A Manuel utilisateur
Citizen
Citizen FS03 Manuel utilisateur
Citizen
Citizen JS00 Manuel utilisateur
Citizen
Citizen E210 Manuel utilisateur
Citizen
Citizen CAL.0S20 Manuel utilisateur
Citizen
Citizen 892 Manuel
Citizen
Citizen W770 Manuel utilisateur
Citizen
Citizen 8205 Manuel utilisateur
Citizen
Citizen Quartz 0580 Manuel
Citizen
Citizen F158 Manuel utilisateur
Citizen
Citizen E21 Manuel utilisateur
Citizen
Citizen JM0 Series Manuel utilisateur
Citizen
Citizen CTZ-B6810 Manuel utilisateur
Citizen
Citizen JP25 Manuel utilisateur
Citizen
Citizen P991 Manuel utilisateur
Citizen
Citizen 941 Manuel
Citizen
Citizen H486 Manuel utilisateur
