Citizen CT915 Manuel utilisateur

INSTRUCTION MANUAL

FOR

CT915

- Eng 2 -

SAFETY PRECAUTIONS

WARNING

●Keep the battery away from infants. If an infant swallowed the battery, meet a doc-

tor immediately.

●Measure temperature according to directions given by a doctor and consult him

(her).

CAUTION

●Do not disassemble the thermometer.

●Do not pull the cord strongly.

●Do not splash water over the thermometer.

●Do not leave the thermometer in a place where it will be exposed to high tempera-

ture or direct sunlight or where the ambient temperature will be below 0°C or the

humidity is high.

- Eng 3 -

English

FEATURES OF CT915

●CT915 records measurement results automatically.

CT915 records data of up to 120 days (measurements).

●Basal body temperature recording mode or all-measurements recording mode can

be selected.

If the basal body temperature recording mode is selected, the temperature is recorded

only one time a day. If the all-measurements recording mode is selected, all the measure-

ment results are recorded.

●You can check the change of your body temperature by graph.

Since the temperature data of 31 days (31 measurements) are displayed by a graph, you

can check the measurement result and measurement date in order.

●Alarm to notify measurement time is available.

You can measure your body temperature at regular time every day.

●You can take out and store the probe easily.

You can take out and store the probe easily and carry the whole set easily since it is small

in size.

●Antibacterial plastic is used.

Since an antibacterial plastic is used for the probe, it is kept clean.

- Eng 4 -

NAME OF EACH PART

Sensor

Probe

Display in value

(Temperature, date)

Display in graph

(Display by dots)

POWER/MEASURE switch

Right shift switch

Cover

Left shift switch

SET switch

RESET switch

Cord

Battery cover

- Eng 5 -

English

HOW TO SET BATTERY

1. Remove the battery cover

Pressing the battery cover by the arrow, slide it in the direc-

tion of the arrow to remove it.

2. Set the battery

Insert the rim of the battery under the battery hook with the

positive side up, then push in the battery until it is fixed se-

curely. If the battery is set correctly, the buzzer sounds and

the display segments light up for 5 seconds. If the battery is

slanted, the thermometer does not operate.

3. Fix the battery cover

Fix the battery cover securely to the body.

*If the battery is replaced, the time, date, and alarm must be

set again.

*After the battery is set, if the display is disordered or the

switches do not work, push the reset switch in the battery

cover with a toothpick, etc.

*Even if the reset switch is pushed, the recorded data are

not deleted.

- Eng 6 -

SETTING ALARM, TIME, DATE, AND MODE

1. Turn the power on

Push and hold the POWER/MEASURE switch for a

while (about 1 second). A pip is heard and the power

is turned on.

2. Turn the alarm ON/OFF

1) Push and hold the SET switch for a while (about

1 second). The screen for setting the alarm ap-

pears.

2) Push the right (s) or left (t) shift switch to dis-

play the bell mark ( )

If the shift switch is pushed

again, the bell mark ( ) disappears. While the

bell mark ( ) is displayed, the alarm is ON. While

the former is not displayed, the latter is OFF.

3) Push the SET switch to set the displayed item.

*When stopping setting halfway, push the POWER/

MEASURE switch.

- Eng 7 -

English

3. Set the “minute” of the alarm time

1) The alarm time is displayed and the “minute”

blinks.

2) Push the right (s) or left (t) shift switch to set

the “minute”. If the shift switch is pushed and held,

the number changes fast. If the right (s) shift

switch is pushed the number increases. If the left

(t) shift switch is pushed the number decreases.

3) Push the SET switch to set the “minute”. The item

to be set next blinks.

4. Set the “hour” of the alarm time

1) The alarm time is displayed and the “hour” blinks.

2) Set the “hour” by the operation in 3. 2) above,

then push the SET switch to set the “hour”.

* The “hour” is displayed in 24-hour display mode.

5. Set the “minute” of the present time

1) The present time is displayed and the “minute”

blinks.

2) Set the “minute” by the operation in 3. 2) above,

then push the SET switch to set the “minute”.

- Eng 8 -

6. Set the “hour” of the present time

1) The present time is displayed and the “hour”

blinks.

2) Set the “hour” by the operation in 3. 2) above,

then push the SET switch to set the “hour”.

7. Set the “day” of the present date

1) The present date is displayed and the “day” blinks.

2) Set the “day” by the operation in 3. 2) above, then

push the SET switch to set the “day”.

8. Set the “month” of the present date

1) The present date is displayed and the “month”

blinks.

2) A Set the “month” by the operation in 3. 2) above,

then push the SET switch to set the “month”.

9. Set the “year” of the present date

1) The present date is displayed and the “year” blinks.

2) A Set the “year” by the operation in 3. 2) above,

then push the SET switch to set the “year”.

*The “year” can be set to 2000

2099.

- Eng 9 -

English

10. Set the basal body temperature recording mode/

all-measurements recording mode.

If the “LADY” mark is displayed, the thermometer is

in the basal body temperature recording mode. In

this mode, the basal body temperature measured

for the first time on each day is recorded. If the “LADY” mark is not displayed, the

thermometer is in the all-measurements recording mode. In this mode, all the mea-

sured temperatures are recorded.

1) Push the right (s) or left (t) shift switch to turn on (or off) the display of “LADY”.

2) Push the SET switch to set turning-on (or turning-off) of the display of “LADY”.

*If you have made any mistake in setting or you need to change the alarm time,

repeat setting from the first.

*If any key is not touched for about 1 minute, the set screen changes to the record

display screen automatically.

- Eng 10 -

BASAL BODY TEMPERATURE RECORDING MODE

1. Remove the probe from the body

1) Open the cover and push the rear end (left end)

of the probe lightly to remove the probe from the

hook.

2) Unwound the cord from the body.

2. Measure the basal body temperature

■Method of measuring basal body temperature

(at a regular time once a day)

1) The alarm buzzer wakes you.

2) Push any one of the switches.

The alarm buzzer stops after about 30 seconds

automatically. If any switch is pushed, however,

the alarm buzzer stops and the measure screen

appears.

If any switch is not pushed, the alarm buzzer

sounds again after 7 minutes.

Measurement

Screen

Display of

LADY

Measure-

ment mark

Autres manuels pour CT915

Table des matières

Autres manuels Citizen Thermomètre

Citizen

Citizen CTD 505 Manuel utilisateur

Citizen

Citizen CT810 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

Citizen

Citizen CT422 Manuel utilisateur

Citizen

Citizen REF CTA 303 Manuel utilisateur

Citizen

Citizen CT461C Manuel utilisateur

Citizen

Citizen REF CTA 301 Manuel utilisateur

Citizen

Citizen CT561C Manuel technique

Citizen

Citizen CT-513W Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

Citizen

Citizen CT-513W Manuel utilisateur

Citizen

Citizen CT830 Manuel utilisateur

Citizen

Citizen CT561C/F Manuel utilisateur

Citizen

Citizen CTD 505 Manuel utilisateur

Citizen

Citizen CT915 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

Citizen

Citizen CT-513W Manuel utilisateur

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur

Veridian Healthcare

Veridian Healthcare 09-349 Manuel utilisateur