Citizen CLP-8301 Manuel utilisateur

-4 -

www.citizen-europe.com

UK: + 44 20 8893 1900

Germany: +49 711 3906 420

-1 -

WiFi Interface Installation Guide

(For CLP-8301 Printer)

Safety Precautions

Safety signs ¾must be strictly observed!

WARNING Indicates a situation which, if not observed and handled properly,

could result in serious injury or death.

CAUTION Indicates a situation which, if not observed and handled properly,

could result in personal injury or property damage.

WARNING Before starting disassembly/reassembly or making adjustments, be sure to disconnect the

power cord from the power outlet.

CAUTION 1. During the maintenance work, be careful not to leave any part or screw detached or

loosened.

2. When handling a printed-circuit board, do not use gloves etc that can cause static

electricity. Since ICs such as CPU, RAM and ROM may be destroyed by static

electricity, do not touch lead wires or windows unnecessarily.

3. Do not put printed-circuit boards directly on the printer or floor.

4. When disassembling or reassembling, check wires for any damage and do not stress

or force the wires.

WiFi Interface Installation Procedure

1. Turn the power switch on the printer OFF and

remove the power cord.

2. Lift the top cover and detach the media guide in

the following manner: The media is already

unloaded. First two screws on both sides and

one screw on the center are turned with a

Phillips screwdriver and removed. Then fold the

media guide and lift it out while moving it to the

left side viewed from the front of the printer.

3. To remove the L-shaped cover of the interface

box, turn with a Phillips screwdriver eight screws

to the interface box and one screw to the top

cover lock arm and take out. Now you can look at

the main printed-circuit board.

4. Remove the serial interface board.

media guide

802.11b

-2 -

5. Remove the parallel interface board supplied as standard from the socket CN2 on the main

printed-circuit board. Then stand to back side of the printer and detach the parallel interface

connector by removing two screws (M3 x 5) and star washers on the parallel interface connector

plate.

6. Replace the screw holding the printer foot under the

WiFi unit. This is changed from an M4 X 12mm to M4X

10mm.

This screw is supplied with theWiFi interface kit. Make

sure that the tip of screw is not protruded over 0.5 mm

(0.002”) from the top edge of the boss on the bottom

case.

7. Identify the connectors on the WiFi module and also the connector locations on the main PCB.

cable of parallel

interface serial interface

connector

parallel interface

connector

screw (M3 x 5)

CN31 – “C”

CN19

“B”

CN1 – “A”

-3 -

8. From the inside of the printer install the WiFi

module to the interface slot where the parallel

interface was previously installed, aligning the

uppermost and lowermost holes of the WiFi fixing

plate (front panel) with the holes of the printer frame.

Then fasten it with two new screws supplied of size

M2.5. These pass through the existing threaded

holes in the printer’s case.

9. Reinstall the serial interface circuit board (from the outside of

the printer) and connect the flat cable to CN21. Note that

the clear plastic cover should be already installed on the WiFi

module to prevent accidentally touching the serial board with

the WiFi board.

11. Lastly return the L-shaped cover and the media guide to their original position and fasten them

with their respective screws.

screw (M2.5)

fixing plate (front panel)

Autres manuels pour CLP-8301

Table des matières

Autres manuels Citizen Imprimante

Citizen

Citizen CMP-20 Manuel utilisateur

Citizen

Citizen CT-S2000 Manuel d'installation

Citizen

Citizen iDP-560RS Manuel utilisateur

Citizen

Citizen CT-S310 Manuel utilisateur

Citizen

Citizen CLP-4081 Manuel utilisateur

Citizen

Citizen CT-S851 Manuel utilisateur

Citizen

Citizen OP900 II Manuel utilisateur

Citizen

Citizen PD-04 Manuel utilisateur

Citizen

Citizen LINE THERMAL PRINTER CT-S280 Manuel utilisateur

Citizen

Citizen CMP-20 Manuel utilisateur

Citizen

Citizen CBM-230 Manuel utilisateur

Citizen

Citizen OP900II Manuel utilisateur

Citizen

Citizen CBM-292 Manuel utilisateur

Citizen

Citizen iDP-3110 Manuel utilisateur

Citizen

Citizen PD-22 Manuel utilisateur

Citizen

Citizen CBM-270 Manuel utilisateur

Citizen

Citizen CX-77WN/BN Manuel utilisateur

Citizen

Citizen CBM-910 Series Manuel utilisateur

Citizen

Citizen CBM1000II Type 2 Manuel utilisateur

Citizen

Citizen GSX-190 Manuel utilisateur

Citizen

Citizen LINE THERMAL PRINTER CT-S280 Manuel d'installation

Citizen

Citizen CBM-270 Manuel utilisateur

Citizen

Citizen CBM-1000 Manuel utilisateur

Citizen

Citizen CLP-9001 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur