Cisco Aironet 1700 Guide de référence rapide
Cisco Systems, Inc.
www.cisco.com
Cisco Aironet Series 1700/2700/3700 Access Point
Deployment Guide
Last Updated: October, 2014
Cisco Aironet Series 3700 Access Point
Abstract
This section covers the Cisco 3700 Series Access Points theory of operation and installation as part of a Cisco wireless LAN
(WLAN) solution. Subjects related include:
•Choosing the right Access Point (AP).
•Differences between AP 3700 and AP 3600.
•Feature module and ClientLink support.
•Physical/Hardware details, mounting options, bracket choices, and installation considerations.
•Antenna options, radiation patterns, and external antenna deployments.
•Understanding spatial streams, MCS rates and beam-forming (802.11n Primer).
•Review of 802.11ac and Wave-1 module for AP 3600.
•Understanding 802.11ac and Wave-1 for the AP 3700.
•Best Practices–Understanding Channel usage, 80 MHz, and available 11ac clients.
•802.11ac performance considerations.
This document is intended for trained and experienced technical personnel familiar with the existing Cisco Wireless
Networking Group (WNG) product line and features.
2
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
Cisco Aironet Series 3700 Access Point
Choosing the Right Access Point
Models
The Cisco 3700 Series Access Point (AP 3700) targets customers requiring support for mission-critical applications. The AP
3700 embodies ClientLink 3.0, an innovative antenna technology comprising four transmit radios and four receive radios called
4X4 in a Multiple Input Multiple Output (MIMO) configuration supporting 3 spatial streams (3SS) together referenced as
4x4:3. Using this type of antenna system along with additional Modulation Coding Schemes (MCS rates supporting up to 256
QAM) and 80 MHz channel bonding, rates of up to 1.3 Gbps can be supported.
ClientLink 3.0–using these features along with an additional antenna (N+1)–allows for beam-forming for all 802.11a/g/n
clients (like ClientLink 2.0) and now beamforms to 11ac 3 spatial streams clients.
Figure 1 Access Point Portfolio Placement
Access Points are available in three models:
•Internal antennas version labeled “i” have captured antennas (part of the housing and not removable). The “i” series is
designed for indoor Enterprise installations, where office aesthetics are a primary concern.
•External antennas version labeled “e” are more rugged and designed for industrial use in locations, such as hospitals,
factories, warehouses, and anywhere a need exists for external antennas and/or extended operating temperatures. The “e”
version also supports mounting inside NEMA enclosures for use in the most demanding environments.
•Access Points for Professional Installations are labeled “p” series and may be used in outdoor applications.
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
Cisco Aironet Series 3700 Access Point
Figure 2 AP 3700 Models and Eco-Packs
Figure 3 AP 3600 Models and Eco-Packs
4
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
Cisco Aironet Series 3700 Access Point
Differences between the AP 3700 and AP 3600
The mechanical front of the AP 3700 and AP 3600 are similar in physical appearance with the exception of the “industrial cuts”
along the edges of the 3700 (left) and the deeper recess around the logo area. This allows for easy visual identification of the
different AP device types.
Figure 4 AP 3700 vs. AP 3600 (External Antenna Models)
Figure 5 AP 3700 and AP 3600 (Backside Identical)
The AP 3700e supports 802.11ac (Wave-1) native. This frees the feature module slot for additional functionality while also
permitting external antenna connections for 802.11ac data rates (w/AP 3700e).
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
Cisco Aironet Series 3700 Access Point
Figure 6 Identifying APs Physically
Feature Module Support
AP 3700 and AP 3600 have integrated support for option modules. The goal in supporting a modular design is to offer a product
that can provide longevity and true flexibility as technology changes. This provides a real value protection for customers. It
also provides Cisco with an opportunity to introduce new features and functionality into a current stable platform.
The Wireless Security and Spread Spectrum Intelligence (WSSI) module adds new functionality to the AP to future-proof
customers' investment. This module provides a dedicated monitor radio to scan the full spectrum (not just the channel on which
the AP is operating). It will offload complete monitoring and security services to the monitor module including CleanAir,
WIDS/WIPS, Context-aware Location, Rogue Detection, and Radio Resource Management (RRM). This module allows for
full spectrum analysis on all channels on both the 2.4 and 5 GHz bands.
Having a WSSI module avoids having the need to deploy a separate, dedicated overlay network for full spectrum monitoring
and eliminates the need for an extra cable pull and additional infrastructure costs (Figure 7).
There is also an option module for the AP 3600 that provides 802.11ac (Wave-1) functionality. This option cannot be used on
the AP 3700 because it already has 802.11ac (Wave-1) integrated. This option module for the AP 3600 will operate at 5GHz
and allow the AP 3600 to fully support 802.11a/n along with 802.11ac clients. Wave-1 functionality supports a 1.3 Gbps PHY
/ ~1 Gbps MAC (throughput) using 3 spatial streams, 80 MHz, and 256 QAM. The option module does not support ClientLink
2.0 but rather supports the Explicit beamforming specification that is part of the 802.11ac standard.
Look out for additional modules for 3/4G support and 802.11ac Wave-2.
Use of option modules may require local power supply, Cisco power injector, .3at PoE+, or the use of Cisco Enhanced PoE, as
the module typically increases the power draw to greater than 15.4 W (.3af).
Note Cisco Enhanced PoE was created by Cisco and is the forerunner to 802.3at PoE+.
6
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
Cisco Aironet Series 3700 Access Point
Figure 7 Feature Module of the Bottom of the AP 3700 and AP 3600
Beamforming – Understanding ClientLink
The AP 3700 supports the new “ClientLink 3.0” and is able to beamform to 802.11ac clients including 1, 2, and 3 spatial
streams. It also supports all ClientLink 2.0 functionality with legacy 11a/g clients and 802.11n 1, 2, and 3 spatial stream clients.
The AP 3600 supports ClientLink 2.0 which beamforms to legacy 11a/g clients and 11n 1, 2, 3 spatial stream but does not
support ClientLink 3.0 (Cisco beamforming method to 11ac clients).
Both the AP 3700 and AP 3600 with module supports the 802.11ac beamforming standard known as ECBF (Explicit
Compressed Beam Forming)–a new IEEE method of beamforming that is emerging but not yet fully supported in 11ac clients.
Cisco ClientLink is similar but can work with all clients today including 11a/g/n as well as 11ac clients. ClientLink also takes
advantage of the extra transceiver in the AP, so it beamforms to clients with 3 spatial streams.
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
Cisco Aironet Series 3700 Access Point
Figure 8 ClientLink Feature Comparison
Both AP 3700 and AP 3600 support a 4x4:3 architecture. However, AP 3600 only supports 11ac in a 3x3:3 mode and lacks the
ability to beamform AC clients beyond 7 clients at a time. But, AP 3700 can beamform 128 clients per radio interface.
Table 1 Feature Comparison between AP 3600 and AP 3700
Feature Comparison AP 3600 AP 3700
Max. Data Rate 450 Mbps
1.3 Gbps – 11ac Module
1.3 Gbps
Radio Dual Radio, 2.4 and 5 GHz Dual Radio, 2.4 and 5 GHz
RF Design (MIMO:SS) 4×4:3 – Integrated Radios
3×3:3 – 11ac Module
4×4:3
Power Draw 4×4:3 + 3×3:3 = 802.3at
5 GHz only = 802.3af
4×4:3 = 802.3at
3×3:3 = 802.3af
Client Count 200 – per integrated radio
50 – 11ac Module
200 – per integrated radio
Beamforming ClientLink 2.0a/g/n – AP
ECBF with 11ac Module
ClientLink 3.0a/g/n/ac
and ECBF with 11ac
Beamforming Client Count 128 – per integrated radio
7 – 11ac Module\
128 – per integrated radio
Spectrum Intelligence CleanAir CleanAir
8
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
Cisco Aironet Series 3700 Access Point
APs Physical Hardware and Mounting Options
AP 1600, 2600, 3600, and 3700 have similar physical dimensions with a few differences in physical appearance, most of which
are cosmetic changes to distinguish the different models. The mounting options and bracket configurations are identical and
interchangeable.
Figure 9 Mechanical Drawing of APs 1600, 2600, and 3600
RRM Available Available
Modules WSSI
802.11ac Wave1
3G Small Cell
802.11ac Wave2
WSSI
3G Small Cell
802.11ac Wave2
Table 1 Feature Comparison between AP 3600 and AP 3700 (continued)
Feature Comparison AP 3600 AP 3700
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
Cisco Aironet Series 3700 Access Point
Figure 10 3700 Mechanical Drawing
There are many different installation options available depending upon the requirements of the customer. Brackets are available
from Cisco as well as third-party companies. During the ordering process, the customer may choose one of two brackets (but
not both). Each bracket is a zero-dollar ($0) option at the time of configuration. If the customer does not choose a bracket, the
selection default is AIR-AP-BRACKET-1, which is the most popular for ceiling installations. The other choice is a universal
bracket that carries part number AIR-AP-BRACKET-2 (Figure 11).
Figure 11 Access Point Bracket Choices - If You Are Using the AP 3600 Module, We Recommend AIR-AP-Bracket-2
If the AP needs to be mounted directly to a ceiling on the gridwork, then AIR-AP-BRACKET-1 is mounted flush and has the
lowest profile. However, if the AP is mounted to an electrical box or other wiring fixture, or inside a NEMA enclosure or
perhaps wall mounted, then AIR-AP-BRACKET-2 is a better choice. The extra space in the bracket allows for wiring, and the
extra holes line up with many popular electrical boxes. When mounting the bracket to the ceiling gridwork, some ceiling tiles
are recessed. For this reason, two different styles of ceiling clips, recessed and flush rails, are available (Figure 12).
1
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
Cisco Aironet Series 3700 Access Point
Figure 12 Different Clips are Available for Attaching to Ceiling Grid Work
Channel Rail Adapters - Cisco Part Number AIR-CHNL-ADAPTER
When mounting APs to ceiling channel rails such as the ones shown in Figure 13, an optional channel adapter is used,
AIR-CHNL-ADAPTER. It comes in a two-pack and attaches to the ceiling grid clip shown above. Refer to Figure 13 and
Figure 14.
Figure 13 Example of Channel Rails
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Cisco Point d'accès sans fil
Cisco
Cisco AIR-MP20B Manuel utilisateur
Cisco
Cisco WAP4410N - Small Business Wireless-N Access... Manuel utilisateur
Cisco
Cisco Aironet 1600 Series Manuel utilisateur
Cisco
Cisco CISCO673-RF - 673 Router Manuel utilisateur
Cisco
Cisco Meraki GR60 Manuel utilisateur
Cisco
Cisco 7330 Manuel utilisateur
Cisco
Cisco Catalyst 9136I Series Manuel utilisateur
Cisco
Cisco Aironet 3800P Series Manuel utilisateur
Cisco
Cisco Aironet 340 Series Manuel
Cisco
Cisco Small Business AP541N Manuel utilisateur
Cisco
Cisco Aironet 1250 Series Manuel utilisateur
Cisco
Cisco Aironet 1600 Series Guide de référence rapide
Cisco
Cisco Aironet 2600 Series Manuel utilisateur
Cisco
Cisco WAP351 Manuel utilisateur
Cisco
Cisco Meraki Mode d’emploi
Cisco
Cisco Aironet AIR-AP1200 Manuel
Cisco
Cisco AIR-AP1220B-A-K9 - Aironet 1200 - Wireless Access... Manuel
Cisco
Cisco Aironet 1600 Series Guide de référence rapide
Cisco
Cisco AIR-LAP1242AG-A-K9 Manuel utilisateur
Cisco
Cisco Aironet 1140 Series Manuel utilisateur
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
Buffalo
Buffalo AirStation WLA-L11G Manuel utilisateur
