Cisco MS420-24 Manuel utilisateur

MS420 Series (EOS) Installation Guide

On Aug 1, 2016, Cisco Meraki announced the end-of-sale date for the MS420 series switch will be

Oct 31, 2016. The end-of-support date is Oct 31, 2023.

Read more about our Product End-of-Life (EOL) Policy.

Models

Model number Description

MS420-24

Layer-3 24-port 10Gbe SFP+ aggregation switch

with 1 management interface and hot-swappable

power supplies / fans

MS420-48

Layer-3 48-port 10Gbe SFP+ aggregation switch

with 1 management interface and hot-swappable

power supplies / fans

Package contents

In addition to the MS switch, the following are provided (mounting kit provided with 1U models only):

MS420-24 Series front panel

MS420-48 Series front panel

MS420 Series back panel

Power input The MS comes standard with US power cord. EU/

UK/AU power cords may be ordered separately.

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, the main LED will be amber.

Additional functions are described below, from left to right.

Item Function LED Status Meaning

1 Restore N/A

Restore button to clear

switch IP and local

configuration settings

2 Fan Orange

One or more of the

system fans has

malfunctioned or is

missing

3 Power (PSU) Orange

One of the system

PSUs (power supplies)

has malfunctioned or is

missing

2Status Orange

Switch is unable to or

has not yet connected

to the Meraki cloud

Flashing green Firmware upgrade in

process

White

Switch is fully

operational and

connected to the

Meraki cloud

Alternating

Switch is booting,

searching for uplink to

Meraki Cloud

Off Switch does not have

power

3 Switch Port LEDs Off No client connected

Solid orange 10/100/1000 Mbps

Solid green 10,000 Mbps (10Gbps)

In addition, there is a RESTORE button available on the front panel.

Insert a paper clip if a restore is required.

• A brief, momentary press: To delete a downloaded configuration and reboot.

• Press and hold for more than 10 sec: To force the unit into a full factory restore.

Management Port

This port is designed to access the local switch configuration page only. For more information on local configuration,

please see Local Configuration.

The management port can not be used as a standard switched port

The MS420 series will ship with all accessories, including fans and two power supplies. Additional accessories, including

fans and power supplies, can be purchased separately.

Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

Bringing your Stack Online

When connecting up your MS420 for the first time the ports are set as ethernet. Once they're online you can convert the

port to a Stack port by simply selecting the option under the interface configuration as shown below:

It's recommended to bring the MS420's online using an uplink on each switch and configuring the port for Stacking prior

to connecting the stack links. This will allow for config sync as well as firmware upgrade. The switches will blink a white

status LED during upgrade so it should be visibly obvious that they're upgrade. When the Switch has a steady White

Light it's connected and ready to continue so the stacking connections can be added.

Mounting hardware

The mounting hardware includes a rack mount rail kit for standard 1U racks. When installing the device, make sure that

there is sufficient space between the rear of the rack and other obstacles to ensure adequate airflow.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cisco Changer

Cisco

Cisco Nexus 9200 Series Manuel utilisateur

Cisco

Cisco Business 250 Series Instructions d'utilisation et d'entretien

Cisco

Cisco Catalyst 2960-X Manuel d'installation

Cisco

Cisco Nexus 3000 series Manuel utilisateur

Cisco

Cisco Catalyst IE 3 00 Series Manuel utilisateur

Cisco

Cisco Catalyst 2960-SF Series Manuel utilisateur

Cisco

Cisco Nexus 3000 series Manuel

Cisco

Cisco AJ732A - MDS 9134 Fabric Switch Manuel utilisateur

Cisco

Cisco SRW224G4-K9-NA Manuel utilisateur

Cisco

Cisco Catalyst PON Series Manuel

Cisco

Cisco Nexus 7000 Series Manuel utilisateur

Cisco

Cisco Catalyst PON Series Manuel

Cisco

Cisco CATALYST 5002 Manuel utilisateur

Cisco

Cisco M5 Manuel

Cisco

Cisco Catalyst 4224 Comment utiliser

Cisco

Cisco 350XG series Mode d’emploi

Cisco

Cisco MDS 9000 Series Manuel d'installation

Cisco

Cisco Catalyst Express 500 Manuel utilisateur

Cisco

Cisco Catalyst Express 500 Manuel utilisateur

Cisco

Cisco 3750 - Catalyst EMI Switch Manuel utilisateur

Cisco

Cisco Nexus 9316D-GX Manuel

Cisco

Cisco Cisco mds 9124 - fabric switch Manuel utilisateur

Cisco

Cisco SRW248G4P Manuel utilisateur

Cisco

Cisco Nexus 9396TX Manuel

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur