Cisco UCS 5100 Manuel utilisateur

Auto Upgrade Blade Firmware Revision in UCS

Environment

Document ID: 110341

Contents

Introduction

Prerequisites

Requirements

Components Used

Network Diagram

Conventions

Main Task

Create Service Profile for Autoconfig Policies

Create Autoconfig Policies

Verify

Troubleshoot

Related Information

Introduction

Cisco Unified Computing System (UCS) has the concept of an automatic policy called Autoconfiguration

Policies. This policy is applied to any new blade that is installed in the UCS system. This policy is to allow

you to upgrade blades to your desired firmware revisions automatically, which eliminates the need to worry

that new or replaced hardware will need to be upgraded or downgraded to meet organizational needs.

This document illustrates how this is done by:

Creating a Service Profile• Creating Autoconfiguration Policies and add these Autoconfiguration Policies to the Service Profile

created

•

Prerequisites

Requirements

Cisco recommends that you have a working knowledge of the Cisco UCS hardware and software.

Components Used

The information in this document is based on Cisco UCS.

The information in this document was created from the devices in a specific lab environment. All of the

devices used in this document started with a default configuration. If your network is live, make sure that you

understand the potential impact of any command.

Network Diagram

A typical Cisco UCS topology looks like this:

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Main Task

Create Service Profile for Autoconfig Policies

Perform these steps:

In the navigation pane, select the Servers tab.1. Right−click Service Profile Template and select Create Service Profile.2.

Fill out the Name and Description in the Create Service Profile Template pop−up window.3.

Click Next.4.

If needed, assign any Storage and Networking to this Service Profile.5. Click Next.6.

If needed, assign Server Boot Order to this Service Profile.7. Click Next.8.

In Server Assignment, choose the Host firmware and Managament firmware to be applied to the

blades.

Click Next.10.

Click Finish.11.

Create Autoconfig Policies

After you have created the Service Profile, the next task is to create the Autoconfig Policies to apply to this

Service Profile. Perform these steps:

Log in to Cisco UCS Manager.1. In the navigation pane, select the Equipment tab.2. Select the Policies tab in the work pane.3. Select Autoconfig Policies.4. Click +.

The Create Autoconfiguration Policy window pops up.

Fill in the required fields within the Create Autoconfiguration Policy pop−up window.6. Make sure you tie this Autoconfiguration Policy to the Service Profile you have created.7. Click OK.8.

Verify

All new UCS Blades inserted into the UCS will automatically get associated to the Autoconfiguration Policy.

UCS will upgrade all firmware on the newly inserted blade to what was defined in the firmware policies.

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

Cisco Systems, Inc.

Updated: Jul 20, 2009 Document ID: 110341

Autres manuels pour UCS 5100

Table des matières

Autres manuels Cisco Serveur

Cisco

Cisco Sourcefire Defense Center 750 Manuel utilisateur

Cisco

Cisco UCS 5108 Manuel utilisateur

Cisco

Cisco UCS C200 Instructions d'installation et d'entretien

Cisco

Cisco Profile Series Manuel utilisateur

Cisco

Cisco UCS C22 Instructions d'installation et d'entretien

Cisco

Cisco UCS C220 M3 Manuel utilisateur

Cisco

Cisco UCS C480 M5 Instructions de montage

Cisco

Cisco UCS M3 Series Manuel utilisateur

Cisco

Cisco Firepower Management Centers Manuel utilisateur

Cisco

Cisco SNS-3415 series Mode d’emploi

Cisco

Cisco C880 Series Instructions de montage

Cisco

Cisco UCS 82598KR Manuel utilisateur

Cisco

Cisco TelePresence Manuel de service

Cisco

Cisco UCS C240 M5 Instructions d'installation et d'entretien

Cisco

Cisco TelePresence Video Communication Server Manuel de service

Cisco

Cisco UCS C200 Instructions d'installation et d'entretien

Cisco

Cisco UCS C24 M3 Manuel utilisateur

Cisco

Cisco VCS Series Manuel utilisateur

Cisco

Cisco UCS C220 M4 Manuel utilisateur

Cisco

Cisco UCS C220 Instructions d'installation et d'entretien

Cisco

Cisco 6400 Manuel utilisateur

Cisco

Cisco UCS B440 M2 Manuel du système

Cisco

Cisco UCS C220 M5 Manuel utilisateur

Cisco

Cisco SNS-3515 series Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur