Cisco Profile Series Manuel utilisateur

Contents

Introduction

Potentially Impacted Systems (~11000 servers):

Customer Visibility/Impact:

Work-Around Options:

Introduction

The intent of this document is to address the manufacturing issue related to the Peripheral

Component Interconnect Express (PCIe) Option ROM settings as seen on some Cisco C220 M4

and C240 M4 servers. A number of the C-Series servers have shipped to customers with the

incorrect PCIe Option ROM settings, preventing them from booting to many PCIe based devices

(Including but not limited to RAID Controller / Serial-Attached SCSI (SAS) Host Bus Adapter

(HBA), Modular LAN on Motherboard (MLOM) or other networking cards or HBAs. The instructions

below will assist you in resolveing customers impacted by this.

Potentially Impacted Systems (~11000 servers):

C220 M4: Systems shipped between Feb 14th and Mar 28th

C240 M4: Systems shipped between Feb 14th and Mar 28th

Customer Visibility/Impact:

Customers are unable to boot from any PCIe Slot based device, as the "All PCIe Slots

OptionROM" flag has been disabled. Customers will need to toggle this BIOS token, and can do

so using any of the workaround methods mentioned below.

Work-Around Options:

Work-Around #1 (Recommended):

shown below.

Set the “All PCIe Slots OptionROM” flag to “enabled”. Save changes and REBOOT the host.

Work-Around #2:

Connect crash cart / launch vKNM to the system. Power the system on and use the F2 menu to

set the “All PCIe Slots OptionROM” flag to ENABLED.

Navigate to the Advanced LOM and PCIe Slots Configuration tab, and press ENTER1.

Scroll down and set the "All PCIe Slots OptionROM" to ENABLED2.

Save changes by pressing F10 and reboot the server.3.

Work-Around #3:

NOTE: This work-around assumes that the Cisco IMC is online and the IP is known. This script

also uses default IMC credentials of admin/password, so if these have been changed users will

need to modify the $pass field as required.

This solution is for customers who used DHCP to IP the IMC(s). Use XML API to log into one or

more system and set the “all PCIe Slots OptionROM” flag correctly. A sample script has been

provided below:

Step 1: Download IMC PowerTool module from the following page:

IMC PowerTool

Save & Run the following file as a <filename>.ps1 file:

Import-Module CiscoUcsPs

$multiimc = Set-UcsPowerToolConfiguration -SupportMultipleDefaultUcs $true

# The tool will prompt user to enter IP’s when run

$imclist = Read-Host "Enter Cisco IMC IP or list of IMC IPs separated by commas"

[array]$imclist = ($imclist.split(",")).trim()

$user = 'admin'

# The default password is on the next line (update as needed)

$pass = ConvertTo-SecureString –String "password" –AsPlainText -Force

$cred = New-Object –TypeName System.Management.Automation.PSCredential

–ArgumentList $user, $pass

$out = Connect-Imc -Credential $cred $imclist

Set-ImcRackUnit -RackUnit 1 -AdminPower soft-shut-down -Force

Get-ImcBiosSettings | Get-ImcBiosVfPCIOptionROMs | Set-ImcBiosVfPCIOptionROMs -

VpPCIOptionROMs "Enabled" -Force

sleep 25

Set-ImcRackUnit -RackUnit 1 -AdminPower up -Force

$out = Disconnect-Imc

Work-Around #4 (Live Linux USB with UCScfg):

This work-around involves creating a live bootable USB, that includes the tools necessary to

correct the OptionROM settings. This requires a blank USB that is at least 4GB in size. Note: the

steps below were performed on Windows 7.

Download the live .iso image here: Live CD1. Download Universal USB Installer here: http://www.pendrivelinux.com/universal-usb-installer-

easy-as-1-2-3/

Launch UUI, and select CentOS as the desired Linux Distribution3. Point UUI to the .iso downloaded in step 1.4. Select desired USB drive to install to, and then click “Create”. Wait for the process to

complete, then USB is ready to use.

6. Plug in USB to affected server and select it as the desired boot device.

Note: The USB loaded with the above image will boot to CentOS, and then launch a series of

UCScfg commands. This particular .iso corrects the optionROM settings AND sets the MLOM Port

0 as the first boot device. After the configuration changes complete, the server will power off.

Changes will be reflected at next power on. UCScfg can be used to customize BIOS/IMC settings

as desired, and the process shown above is just an example, and will correct the issues

mentioned in this article only.

Autres manuels pour Profile Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cisco Serveur

Cisco

Cisco AS5300 - Universal Access Server Manuel utilisateur

Cisco

Cisco AS5800 Manuel utilisateur

Cisco

Cisco UCS E Series Manuel utilisateur

Cisco

Cisco Cisco MeetingPlace Express Mode d'emploi

Cisco

Cisco Firepower Management Center 750 Manuel utilisateur

Cisco

Cisco UCS C220 M5SX Manuel utilisateur

Cisco

Cisco SNS-3415 series Mode d’emploi

Cisco

Cisco UCS Invicta C3124SA Manuel

Cisco

Cisco UCS C220 Manuel utilisateur

Cisco

Cisco UCS C240 M4 Instructions d'installation et d'entretien

Cisco

Cisco 5100 Manuel utilisateur

Cisco

Cisco UCS 82598KR Manuel utilisateur

Cisco

Cisco Firepower Management Centers Manuel utilisateur

Cisco

Cisco UCS E Series Manuel utilisateur

Cisco

Cisco SNS-3415 series Manuel utilisateur

Cisco

Cisco UCS B200 M5 Manuel

Cisco

Cisco Sourcefire Defense Center 750 Manuel utilisateur

Cisco

Cisco UCS C210 M2 Manuel du système

Cisco

Cisco UCS B460 M4 Manuel utilisateur

Cisco

Cisco 3500 Series Manuel utilisateur

Cisco

Cisco TelePresence Server 7010 Guide de référence

Cisco

Cisco UCS 6500 Series Manuel utilisateur

Cisco

Cisco UCS C240 M3 Manuel utilisateur

Cisco

Cisco C800 Series Manuel du propriétaire

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur