Cisco SPA-500 Series Manuel utilisateur

Barracuda Phone System

Cisco SPA 500 Series Quick Reference Guide 1 / 4

Cisco SPA 500 Series Quick Reference Guide

https://campus.barracuda.com/doc/45712722/

This article explains the basic operation of the Cisco SPA 500 Series family of devices.

SPA 509G Phone SPA 501G Phone

SPA 508G Phone SPA 504G Phone

Soft Keys

The four buttons immediately below the LCD display are called soft keys.

Each soft key performs the action displayed immediately above it.

The soft key behavior is context sensitive – the associated soft key action changes according to

the current phone state.

Place a Call

Enter the desired internal extension or external number, then press the Dial soft key.

Last Number Redial

Press the Redial button, to the left of the 7 key.

Call Hold

Barracuda Phone System

Cisco SPA 500 Series Quick Reference Guide 2 / 4

To place a call on hold, press the Hold soft key.

To resume the call, press the Resume soft key.

Call Transfer

Attended Transfer

To transfer a call, press the More soft key, then press the Transfer soft key.

Dial the destination number, then press the Send soft key.

When the destination party answers the call, announce the caller, and press Transfer again to

complete the transfer.

Blind Transfer

To transfer a call, press the Blind soft key and enter the destination number.

Press the Send soft key to connect the remote party to the destination, disconnecting you from

the call.

Ad-Hoc Conference / 3-Way Calling

Place (or receive) a call.

To add another party to the call, press the More soft key, then press the Confrnc soft key.

Enter the destination number or extension and press the Send soft key.

When the destination party answers the call, press the More soft key, then

press Confrnc again.

All parties are now joined in a 3-way call.

To end the conference, press the More soft key, then press the Split soft key. Both parties are

placed on hold, ending the conference.

Call Forwarding

To enable call forwarding, press the Forward soft key.

Select the type of forwarding to enable and select a destination.

Press the Enable soft key.

The phone display indicates when call forwarding is enabled.

To deactivate forwarding, press the Forward soft key then press Disable.

Barracuda Phone System

Cisco SPA 500 Series Quick Reference Guide 3 / 4

Ringer and Handset Volume

To change the ringer volume when the phone is idle, press the volume up and volume down

buttons at the right side of the keypad.

To change the volume of the handset or speakerphone, during an active call, press the volume

up and volume down buttons.

To toggle mute on and oﬀ, during an active call, press the red mute button.

Barracuda Phone System

Cisco SPA 500 Series Quick Reference Guide 4 / 4

Figures

worddavdedc61b871de588ca26258ce5ﬀba62d.png1.

worddave504e3bbe29b241f2d71e06ddc2c1983.png2.

worddav18a1630203c0d3c93b1ae0ea58832e7f.png3.

worddav4f3a31ebb479dc96aefa6b21bf2583ea.png4.

portion of this document may be copied, distributed, publicized or used for other than internal documentary purposes without the written consent of

an oﬃcial representative of Barracuda Networks Inc. All speciﬁcations are subject to change without notice. Barracuda Networks Inc. assumes no

responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this

publication without notice.

Autres manuels pour SPA-500 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cisco Téléphone IP

Cisco

Cisco 7841 Manuel utilisateur

Cisco

Cisco Unified 7905G Manuel utilisateur

Cisco

Cisco 7961 Manuel utilisateur

Cisco

Cisco IP Conference Station 7935 Manuel utilisateur

Cisco

Cisco 7921G - Unified Wireless IP Phone VoIP Manuel utilisateur

Cisco

Cisco 7911 Manuel utilisateur

Cisco

Cisco 8811 Manuel utilisateur

Cisco

Cisco UNIFIED 9971 Manuel utilisateur

Cisco

Cisco 8861 Manuel utilisateur

Cisco

Cisco 7975G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco 7800 Series Mode d’emploi

Cisco

Cisco UNIFIED 9971 Manuel utilisateur

Cisco

Cisco 7942 Guide de configuration

Cisco

Cisco 7811 Manuel utilisateur

Cisco

Cisco 7945 Series Manuel utilisateur

Cisco

Cisco 7910 Series Manuel utilisateur

Cisco

Cisco 7832 Manuel utilisateur

Cisco

Cisco 7961G - IP Phone VoIP Manuel utilisateur

Cisco

Cisco 6941 - Unified IP Phone Slimline VoIP Manuel utilisateur

Cisco

Cisco DATAVOX 7941 Manuel utilisateur

Cisco

Cisco 8821 Manuel utilisateur

Cisco

Cisco 8845 Manuel utilisateur

Cisco

Cisco 3905 Manuel du propriétaire

Cisco

Cisco 8800 Series Mode d’emploi

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur