Cisco Poly TRIO C60 Manuel utilisateur

Poly TRIO C60 Manual Reconfiguration Procedure

WARNING: THIS PROCEDURE DESCRIBES HOW TO MANUALLY RECONFIGURE A POLY TRIO C60 IP DEVICE

TO WORK ON THE BROADSOFT BROADCLOUD PBX NETWORK. ONCE THIS PROCEDURE HAS BEEN

COMPLETED, ANY PRIOR CONFIGURATION SETTINGS ON THE DEVICE WILL BE OVERRIDDEN, INCLUDING

THE ADMINISTRATOR PASSWORD, AND THE DEVICE WILL ONLY BE USABLE ON THE BROADSOFT

BROADCLOUD PBX NETWORK. THE DEVICE MUST BE RETURNED TO THE POLYCOM FACTORY DEFAULT

CONFIGURATION BEFORE IT CAN BE USED ON ANY NETWORK OTHER THAN BROADSOFT BROADCLOUD

PBX.

Reset the phone to Factory Defaults before continuing.

1. Touch the Home icon on the touchscreen

2. Select “Settings” by touching the corresponding icon on the screen

3. Select “Advanced” by touching the corresponding icon on the screen

4. At the password prompt, enter key in 456 then press the green Enter tick icon.

Note:

•If the password is a known value other than 456, then enter that value instead

•If the password is not 456 and the actual password is not known, then the remainder of

this procedure cannot be performed, and the device cannot be modified for use in the

BroadSoft BroadCloud PBX network.

5. On the touchscreen, select “Administration Setting”

6. On the touchscreen, select “Network Configuration”

7. On the touchscreen, select “Provisioning Server”

8. On the touchscreen, select “DHCP Menu”

9. On the touchscreen, select “Boot Server”

10. On the touchscreen, select “Static”

11. Touch “Return”arrow to return to the “Provisioning Server”menu

13. On the touchscreen, select “Server Type:”

14. On the touchscreen, select “HTTPS” and back to “Provisioning Server”menu

15. On the touchscreen, select “Server Address:”

16. Using the soft keyboard on the touchscreen, enter the following case sensitive URL:

For North America

https://plcm.sipflash.com

For Europe

https://polycom.broadcloud.eu

For Australia

https://polycom.broadcloud.com.au

For FED

https://polycom.broadcloudgov.us

If you are having trouble flashing your device with these URLs, please contact your technical

support team for assistance.

17. Touch the green Enter tick icon to save and back to “Provisioning Server”menu

18. Touch Exit arrow repeatedly until the device is returned to the “Settings” menu

19. On the touchscreen, select “Basic”

20. On the touchscreen, select “Reboot Phone”

21. Select “Yes” to initiate the reboot sequence

Once the boot process has completed, the device will be provisioned for use in the BroadSoft

BroadCloud PBX network. If the station assignment process was properly completed prior to

the reboot, the device will boot into a station specific assigned/usable state. If not, the device

will boot into a default unassigned/unusable state, and will remain in this state until the site

administrator has completed the station assignment process. If this occurs, contact your site

administrator and request that station assignment be completed for the device in question.

Table des matières

Autres manuels Cisco Téléphone IP

Cisco

Cisco 7925G - Unified Wireless IP Phone VoIP Manuel utilisateur

Cisco

Cisco 7975G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco 3905 Manuel utilisateur

Cisco

Cisco SPA 509G Mode d’emploi

Cisco

Cisco 7800 Series Manuel utilisateur

Cisco

Cisco SPA300 Series Manuel utilisateur

Cisco

Cisco 6851 Manuel utilisateur

Cisco

Cisco DATAVOX 7941 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Cisco

Cisco 7906G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco 8811 Manuel utilisateur

Cisco

Cisco 7965 Guide de configuration

Cisco

Cisco 8811 Manuel du propriétaire

Cisco

Cisco Cisco Unified IP Phone 7960G Manuel utilisateur

Cisco

Cisco 7911G - IP Phone VoIP Mode d’emploi

Cisco

Cisco 7841 Manuel utilisateur

Cisco

Cisco Razorline 7975 Manuel d'instructions et de sécurité

Cisco

Cisco 7970G Manuel utilisateur

Cisco

Cisco SPA302D Manuel utilisateur

Cisco

Cisco DATAVOX 7941 Manuel utilisateur

Cisco

Cisco UNIFIED 9971 Manuel utilisateur

Cisco

Cisco 7945G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco 7905 Manuel utilisateur

Cisco

Cisco 7965 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur