Circutor REC 3 Series Manuel utilisateur

INSTRUCTION MANUAL
RCCB with automatic reclosing device
REC 3 REC 3C
(M98252001-03-18A)

2Instruction Manual
REC 3 - REC 3C

SAFETY PRECAUTIONS
DANGER
Warns of a risk, which could result in personal injury or material damage.
ATTENTION
Indicatesthatspecialattentionshouldbepaidtoaspecicpoint.
Follow the warnings described in this manual with the symbols shown below.
If you must handle the unit for its installation, start-up or maintenance, the following
should be taken into consideration:
Incorrect handling or installation of the unit may result in injury to personnel as well as damage
to the unit. In particular, handling with voltages applied may result in electric shock, which may
cause death or serious injury to personnel. Defective installation or maintenance may also
leadtotheriskofre.
Read the manual carefully prior to connecting the unit. Follow all installation and maintenance
instructions throughout the unit’s working life. Pay special attention to the installation stan-
dards of the National Electrical Code.
Refer to the instruction manual before using the unit
In this manual, if the instructions marked with this symbol are not respected or carried out correctly, it can
result in injury or damage to the unit and /or installations.
CIRCUTOR,SAreservestherighttomodifyfeaturesortheproductmanualwithoutpriornotication.
DISCLAIMER
CIRCUTOR, SA
reservestherighttomakemodicationstothedeviceortheunitspecica-
tions set out in this instruction manual without prior notice.
CIRCUTOR, SA on its web site, supplies its customers with the latest versions of the device
specicationsandthemostupdatedmanuals.
www.circutor.com
CIRCUTOR, recommends using the original cables and accessories that are
supplied with the device.
3
Instruction Manual
REC 3 - REC 3C

CONTENTS
SAFETY PRECAUTIONS ���������������������������������������������������������������������������������������������������������������������������������������3
DISCLAIMER ����������������������������������������������������������������������������������������������������������������������������������������������������������3
CONTENTS�������������������������������������������������������������������������������������������������������������������������������������������������������������4
REVISION LOG�������������������������������������������������������������������������������������������������������������������������������������������������������5
1�- VERIFICATION UPON RECEPTION�����������������������������������������������������������������������������������������������������������������6
2�- PRODUCT DESCRIPTION��������������������������������������������������������������������������������������������������������������������������������6
2�1�- REC 3C 2 POLES��������������������������������������������������������������������������������������������������������������������������������������8
2�2�- REC 3C 4 POLES��������������������������������������������������������������������������������������������������������������������������������������9
2�3�- REC 3 2 POLES �������������������������������������������������������������������������������������������������������������������������������������� 10
2�4�- REC 3 4 POLES �������������������������������������������������������������������������������������������������������������������������������������� 11
3�- DEVICE INSTALLATION ���������������������������������������������������������������������������������������������������������������������������������12
3�1�- PRIOR RECOMMENDATIONS����������������������������������������������������������������������������������������������������������������� 12
3�2�- INSTALLATION ����������������������������������������������������������������������������������������������������������������������������������������12
3�3�- CONNECTION,REC 3 2 POLES Y REC 3C 2 POLES����������������������������������������������������������������������������� 14
3�4�- CONNECTION, REC 3 4 POLES AND REC 3C 4 POLES ���������������������������������������������������������������������� 15
3�5�- OUTPUTS: REC 3C 2 POLES AND REC 3C 4 POLES �������������������������������������������������������������������������� 16
4�- START-UP ������������������������������������������������������������������������������������������������������������������������������������������������������� 17
4�1�- AUTOMATIC MODE ��������������������������������������������������������������������������������������������������������������������������������17
4�2�- MANUAL MODE��������������������������������������������������������������������������������������������������������������������������������������17
5�- OPERATION ���������������������������������������������������������������������������������������������������������������������������������������������������18
5�1�- MANUAL�������������������������������������������������������������������������������������������������������������������������������������������������� 18
5�2�- AUTOMATIC ��������������������������������������������������������������������������������������������������������������������������������������������18
5�2�1�- RECLOSING DEVICE BY INSULATION, M MODE��������������������������������������������������������������������������19
5�2�2�- RECLOSING DEVICE BY TIME, T MODE���������������������������������������������������������������������������������������� 20
5�2�3�- RESTARTING THE RECLOSING SYSTEM METER ������������������������������������������������������������������������ 20
5�2�4�- RESET ����������������������������������������������������������������������������������������������������������������������������������������������� 20
5�3�- LED ����������������������������������������������������������������������������������������������������������������������������������������������������������21
5�4�- OUTPUTS (ONLY FOR THE REC 3C 2 POLES AND REC 3C 4 POLES)��������������������������������������������� 21
6�- MAINTENANCE�����������������������������������������������������������������������������������������������������������������������������������������������22
7�- TECHNICAL FEATURES ��������������������������������������������������������������������������������������������������������������������������������23
8�- MAINTENANCE AND TECHNICAL SERVICE������������������������������������������������������������������������������������������������25
9�- GUARANTEE���������������������������������������������������������������������������������������������������������������������������������������������������25
10�- CE CERTIFICATE������������������������������������������������������������������������������������������������������������������������������������������26
4Instruction Manual
REC 3 - REC 3C

REVISION LOG
Table 1: Revision log�
Date Revision Description
03/15 M98252001-03-15A Initial Version
02/16 M98252001-03-16A Changes in the following sections:
2.- 3.5. - 5.2. - 5.2.1. - 7
05/18 M98252001-03-18A Changes in the following sections:
2. - 3.5. - 5.2.1. - 5.2.2. - 10.
Note: The images of the devices are solely for the purpose of illustration and may differ from
the original device.
5
Instruction Manual
REC 3 - REC 3C

1�- VERIFICATION UPON RECEPTION
Check the following points when you receive the device:
a)Thedevicemeetsthespecicationsdescribedinyourorder.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- Installation guide
If any problem is noticed upon reception, immediately contact the transport
company and/or CIRCUTOR's after-sales service.
2�- PRODUCT DESCRIPTION
The REC 3 is an RCCB with an automatic reclosing device designed to protect people againts
earth leakage current.
There are 4 models:
REC 3C 2 poles, for single phase installations controlled by a 2-pole RCCB.
With2outputstoindicatetheRCCBstatusandthatreclosingsequencehasnished.
REC 3C 4 poles, for three-phase installations controlled by a 4-pole RCCB.
With2outputstoindicatetheRCCBstatusandthatreclosingsequencehasnished.
REC 3 2 poles, for single phase installations controlled by a 2-pole RCCB.
REC 3 4 poles, for three-phase installations controlled by a 4-pole RCCB.
These models can be rated at 30 mA or 300 mA, depending on the setpoint current of the
RCCBs.Suchafeatureisconguredbythedevicemodel.
The device uses two automatic reclosing methods:
Insulation method, in 30mA models.
Time method, by in 300mA models.
6Instruction Manual
REC 3 - REC 3C

Table 2:relationship models REC 3
Model Description Nr of
poles
Rated
current Sensitivity Reclosing
method Nr reclosures
P26121 REC3-2P-40-30M 240 A 30 mA Insulation 3
P26131 REC3-2P-63-30M 263 A 30 mA Insulation 3
P26123 REC3-2P-40-300T 240 A 300 mA Time 3
P26133 REC3-2P-63-300T 263 A 300 mA Time 3
P26221 REC3-4P-40-30M 440 A 30 mA Insulation 3
P26231 REC3-4P-63-30M 463 A 30 mA Insulation 3
P26223 REC3-4P-40-300T 440 A 300 mA Time 3
P26233 REC3-4P-63-300T 463 A 300 mA Time 3
Table 3:relationship models REC 3C
Model Description Nr of
poles
Rated
current Sensitivity Reclosing
method Nr reclosures
P26811 REC3C-2P-40-30M 240 A 30 mA Insulation 3
P26814 REC3C-2P-63-30M 263 A 30 mA Insulation 3
P26721 REC3C-2P-40-300T 240 A 300 mA Time 3
P26724 REC3C-2P-63-300T 263 A 300 mA Time 3
P26812 REC3C-4P-40-30M 440 A 30 mA Insulation 3
P26815 REC3C-4P-63-30M 463 A 30 mA Insulation 3
P26722 REC3C-4P-40-300T 440 A 300 mA Time 3
P26725 REC3C-4P-63-300T 463 A 300 mA Time 3
7
Instruction Manual
REC 3 - REC 3C

2.1.- REC 3C 2 poles
RCCB
CONTROL
MODULE
LED
MODE SELECTION
SWITCH
PROTECTION
COVER
POWER SUPPLY
COVER
MEASURING
COVER
-25
AUTO
POWER
230V 50Hz
5VA
~;
REC
EN 50557
REC 3C
ON OFF
230V 0,13A~ ~
AUX TRIP
5 4 3 2 1
OUTPUT
Figure 1: Description of the REC 3C 2 poles�
The device features (Figure 1):
- 2 LEDs that indicate the status of the REC 3C.
- Protection cover for the reclosing system.
- Mode selection switch to select between Manual and Automatic operating mode
and physically lock the reclosing device.
- 2 outputstoindicatetheRCCBstatusandthatreclosingsequencehasnished.
The power supply and measuring connections between the control module and the RCCB are
cabled; the device comes with 2 covers for these connections.
8Instruction Manual
REC 3 - REC 3C

2.2.- REC 3C 4 poles
RCCB
CONTROL
MODULE
LED
MODE
SELECTION
SWITCH
PROTECTION
COVER
POWER SUPPLY
COVER
MEASURING COVER
OUTPUT
-25
AUTO
230V 0,13A~ ~
ON
POWER
230V 50Hz
5VA
~;
REC
OFF
EN 50557
Made in EU
AUX TRIP
REC 3C
5 4 3 2 1
Figure 2: Description of the REC 3C 2 poles�
The device features (Figure 2):
- 2 LEDs that indicate the status of the REC 3C.
- Protection cover for the reclosing system.
- Mode selection switch to select between Manual and Automatic operating mode,
and to physically lock the reclosing device.
- 2 outputstoindicatetheRCCBstatusandthatreclosingsequencehasnished.
The power supply and measuring connections between the control module and the RCCB
comefactory-cabledandcannotbemodied.
9
Instruction Manual
REC 3 - REC 3C

2.3.- REC 3 2 poles
RCCB
CONTROL
MODULE
LED
MODE SELECTION
SWITCH
PROTECTION
COVER
POWER SUPPLY
COVER
MEASURING
COVER
-25
AUTO
POWER
230V 50Hz
5VA
~;
REC
EN 50557
REC3
ON OFF
Figure 3: Description of the REC 3 2 poles�
The device features (Figure 3):
- 2 LEDs that indicate the status of the REC 3.
- Protection cover for the reclosing system.
- Mode selection switch to select between Manual and Automatic operating mode,
and to physically lock the reclosing device.
The power supply and measuring connections between the control module and the RCCB are
cabled; the device comes with 2 covers for these connections.
10 Instruction Manual
REC 3 - REC 3C
Ce manuel convient aux modèles suivants
33
Table des matières
Autres manuels Circutor Changer



















