06
07
CIRCONTROL — Master-Satellite User Manual
IMPORTANT SAFETY INSTRUCTIONS
Refer to TECHNICAL DATA section for more information about environmental installation conditions.
• Do not use the Charge Point for
anything other than electric vehicle
chargingmodeswhicharedened
in IEC 61851-23.
• Do not modify the Charge Point. If
modied,CIRCONTROLwillrejectall
responsibility and the warranty will
be void.
• Comply strictly with electrical safety
regulations according to your
country.
• Do not make repairs or
manipulations with the unit
energised.
• Onlytrainedandqualiedpersonnel
should have access to the electrical
parts inside the Charge Point.
• Check the installation annually by
qualiedtechnician.
• Remove from service any item that
has a fault that could be dangerous
for users (broken connectors, caps
that don’t close...).
• Use only Circontrol supplied spare
parts.
• Do not use this product if the
enclosure or the EV connector is
broken, cracked, open, or shows any
other indication of damage.
• Adaptors or conversion
adapters and cord extensions
set are NOT allowed to be used.
• The device does not emit noise,
ultrasounds,electromagneticelds
and does not produce harmful
substances, thanks to which it can
be operated in the environment.
• Payattentiontotrafcinbusystreets.
• Waste generated after the
disassembly of a waste device or
a device taken out of service is
handed over to a person conducting
activity in the eld of recycling or
conducting activity in the eld of
recovery processes.
Read carefully all the instructions before starting in order
to ensure properly installation of the Charge Point.
