1. Information
Trademark
All of the company or product names mentioned in this manual are the trademarks or
registered trademarks of their respective holders.
Disclaimer
All of the contents in this manual, product specifications, size and shape are subject to
change without prior notice.
The manufacturer makes no representations or warranties with regard to the contents
hereof and reserves the right to revise this manual without obligation to notify any person.
The manufacturer shall not be liable for any technical or editorial errors or omissions
contained in this manual, or for any damage, direct or indirect, from discrepancies
between the manual and the product it describes.
The manufacturer assumes no responsibility, directly or indirectly, for financial losses or
claims from third persons resulting from the use of this product and any of its functions.
For purposes of storage capacity, a gigabyte (GB) equals 1,000,000,000 bytes.
Total accessible capacity varies depending on operating environment.
All references to speed are for comparison purposes only. Actual data throughput will
vary.
Precautions
Please follow the precautions listed below. Failure to do so may cause damage to the
device and void the warranty.
* Read this User’s Guide carefully and follow the procedures for installing and using
the device.
* Do not open the device or attempt to disassemble or modify it. If it appears to be
malfunctioning, contact Technical Support.
* Never expose the device to water or other liquids or in damp or wet conditions in
order to avoid danger of electric shock, short-circuiting or personal injury.
* Place the power adapter and the power cord such a way that people cannot step
on it.
* Do not use a third-party AC adapter or power cord.
* Do not cover the openings; the openings on the equipment are for air convection
hence protects the equipment from overheating.
*If any of the following situations arises, have the equipment checked by service
personnel:
-The USB connector is damaged.
-The power adapter, power cord or power connector is damaged.
-Liquid has penetrated into the equipment.
-The equipment has dropped and damaged.
-The equipment has obvious sign of breakage.
