CIGMAN CM-701 Manuel utilisateur
Laser Level
Mode: CM-701
User Manual
Please read these instructions before operating the product.
Contact us:support@cigmantools.com
2
Content
Safety Notes .............................................................................................. 3
Intended Use............................................................................................................. 4
Initial Operation......................................................................................................... 5
Product Overview................................................................................................ 6
Laser level.................................................................................................................. 6
Remote Control......................................................................................................... 8
Operating Modes..................................................................................................9
Auto Self-leveling Mode.......................................................................................... 9
Manual Mode...........................................................................................................10
Pulse Mode..............................................................................................................10
Specification........................................................................................................ 11
Troubleshooting................................................................................................. 12
Maintenance......................................................................................................... 13
Three Years Warranty...................................................................................... 14
3
Safety Notes
Working safely with the measuring tool is possible when the operating and
safety information are read completely and the instructions contained therein
are strictly followed. Never make warning labels on the measuring tool
unrecognizable. Save these instructions for reference.
·Caution - Using unmentioned operating or adjusting equipment can lead to
dangerous radiation exposure.
·While the product is in operation, be careful not to expose your eyes to the
emitting laser beam. Exposure to the beam of a Class 2 laser is considered
safe for a maximum of 0.25 seconds. Eyelid reflexes will normally provide
adequate protection.
·Do not stare directly into the beam or view directly with optical instruments
or set up the laser at eye level.
4
·Have the measuring tool repaired through qualified specialists using original
spare parts. This ensures that the safety of the measuring tool is maintained.
·Do not allow children to use the laser measuring tool without supervision.
They could unintentionally blind other people or themselves.
·Do not operate the measuring tool in an explosive environment, such as in
presence of flammable liquids, gases, or dust. Sparks can be created in the
measuring tool which may ignite the dust or fumes.
·Do not make any modifications to the laser equipment.
Intended Use
The measuring tool is intended for determining and checking horizontal and
vertical lines. The measuring tool is suitable exclusively for operation in
enclosed working sites.
5
Initial Operation
·Protect the measuring tool against moisture and direct sunlight.
·Do not subject the measuring tool to extreme temperatures or variations in
temperature. In case of large variations in temperature, allow the measuring
tool to adjust to ambient temperature before putting it into operation.
·Avoid heavy impact to or falling down of the measuring tool.
·Switch the measuring tool off during transport.
6
Product Overview
Laser level
7
8
Remote Control
:Control the vertical laser line at the
front of the instrument.
:Control the vertical laser line on the
side of the instrument.
:Control the horizontal laser line.
:Control the brightness of the laser,
there are 4 gears to adjust.
9
Operating Modes
Auto Self-leveling Mode
·To switch on the measuring tool, slide Lock Switch to " " position.
·Immediately after switching on, the measuring tool sends out 1 horizontal
beam and 2 vertical beams with automatic leveling range of ±4º. Once the
leveling is finished, the laser beams won’t flash anymore, the indicator glows
green. Shortly press the corresponding button to control the laser beams:
·To turn off the measuring tool, slide lock switch to " " position.
NOTE: When moving or storing the level, please keep the slide switch in the " " position.
10
Manual Mode
In manual mode, the measuring tool won’t be self-leveling. It could be held by
hand or placed on an inclined surface to project a rigid laser beam in any
orientation.
To switch on/off the measuring tool, press and hold the " " for more than 3
seconds. Short-press " " to adjust brightness cyclically, four gears are
available.
Pulse Mode
In the self-leveling mode, long-press " " to enter the pulse mode, the
indicator light will keep flashing. This mode is invalid in power saving mode.
When you open pulse mode, you can use a laser receiver(not included) to
carry out leveling at long distances or when the laser beams are not visible.
Table des matières
