Christie CP2415-Xe Instructions de montage
Installation and Setup Guide
020-103584-02
CP2415-Xe
NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied
warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection
with the performance or use of this material. Our centers of excellence for manufacturing in Kitchener, Ontario, Canada and in Shenzhen, China are ISO
9001:2015 Quality Management System-certified.
For the most current technical documentation and office contact information, visit http://www.christiedigital.com.
Warranty
Products are warranted under Christie’s standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/
warranties/ or by contacting your Christie dealer or Christie.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in
accordance with the maintenance schedule specified by Christie, will void the warranty.
ENVIRONMENTAL
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products.
If printing this document, consider printing only the pages you need and select the double-sided option.
Please help us to conserve the environment we live in!
Content
Introduction...................................................... 5
Product documentation................................................5
Related documentation..............................................5
Safety precautions...................................................5
General precautions................................................6
AC power precautions...............................................6
Lamp precautions.................................................7
Light intensity hazard distance.........................................8
Product labels...................................................10
Projector overview..................................................12
Key features......................................................13
List of components..................................................13
Accessories.................................................... 13
CineMaster cinema calculator tool........................................ 14
Contact your dealer.................................................15
Technical support...................................................15
Installation and setup..............................................16
Site requirements.................................................. 16
Power specifications...............................................16
Projector components................................................17
Preparing the installation site...........................................17
Required tools and components..........................................18
Lifting and positioning the projector.......................................18
Adjusting the projector tilt and level.......................................18
Optionally connecting the exhaust duct.....................................19
Installing the lens..................................................19
Installing the lamp..................................................21
Installing the IMB.................................................. 23
Connecting power..................................................24
Turning the projector on for the first time................................. 25
Disposing of the product packaging....................................... 25
Connecting devices and establishing communication.....................26
CP2415-Xe Installation and Setup Guide 3
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Video Input panel.................................................. 26
Using the Remote user interface (UI)......................................27
Turning the projector on or off.......................................... 28
Logging on to the projector............................................ 28
Turning the light source on or off.........................................28
Selecting IMB preferences.............................................29
Activating marriage.................................................29
Operation....................................................... 30
Turning the projector on..............................................30
Turning the projector off..............................................30
Projector states....................................................30
Adjusting the image............................................... 32
Maximizing light output...............................................32
Calibrating the Intelligent Lens System.....................................32
Aligning the image..................................................32
Adjusting offset by using an ILS .........................................33
Correcting vignetting................................................ 33
Correcting keystone effect.............................................33
Adjusting DMD convergence ........................................... 34
Electronically adjusting convergence.......................................36
Adjusting the left and right boresight ......................................37
Adjusting the top and bottom boresight ....................................40
Rotating the integrator rod ............................................43
Adjusting the fold mirror ..............................................44
Calibrating the color.................................................45
Regulatory...................................................... 46
Safety......................................................... 46
Electro-magnetic compatibility.......................................... 46
Emissions..................................................... 46
Immunity..................................................... 46
California law on security..............................................46
Environmental.................................................... 47
Content
CP2415-Xe Installation and Setup Guide 4
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Introduction
This manual is intended for qualified installers and trained operators of Christie CP2415-Xe projection
systems.
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
website. Read all instructions before using or servicing this product.
To access the documentation from the Christie website:
• Go to this URL: https://bit.ly/3vxrm4Y or
https://www.christiedigital.com/products/cinema/projection/cinelife-plus-series/.
• Scan the QR code using a QR code reader app on a smartphone or tablet.
• On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on this product is available in the following documents.
•CP2415-Xe Product Safety Guide (P/N: 020-103673-XX)
•CineLife+ User Guide (P/N: 020-103073-XX)
•CineLife+ Serial Commands Guide (P/N: 020-103075-XX)
•CP2415-Xe Service Guide (P/N: 020-103582-XX)
Safety precautions
When installing the projector, observe these important safety rules to avoid personal injury or damage
to the projector.
This projector must be operated in an environment that meets the operating range specified in the
environmental specifications (on page 16).
CP2415-Xe Installation and Setup Guide 5
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
General precautions
Read all safety and warning guidelines before installing or operating the projector.
Warning! If not avoided, the following could result in death or serious injury.
• FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated
light beam of the projector.
• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
• This product must be installed within a restricted access location not accessible by the general
public.
• Only personnel who are trained on the precautions for the restricted access location can be
granted entry to the area.
• Install the product so users and the audience cannot enter the restricted area at eye level.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
• High leakage current present when connected to IT power systems.
• FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
• Do not install or operate the projector in any position that does not meet the stated product
specifications for alignment and orientation.
• Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
• UV EXPOSURE! For protection from harmful radiation, keep all product housings intact during
operation.
• Protective safety gear and goggles are recommended when servicing.
AC power precautions
Read all safety and warning guidelines before connecting to AC power.
If you cannot insert the plug into the existing outlet, contact an electrician to have the outlet replaced.
Introduction
CP2415-Xe Installation and Setup Guide 6
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.
• FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.
• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.
• SHOCK HAZARD! The optional UPS power cord must be inserted into an outlet with grounding.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• SHOCK HAZARD! A dedicated, protected ground or earth wire must be installed on the product
by Christie qualified technicians or electricians before it can be connected to power.
• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
• FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.
• Install the product near an easily accessible AC receptacle.
Caution! If not avoided, the following could result in minor or moderate injury.
• Only Christie qualified technicians are permitted to open product enclosures.
• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.
• FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.
• SHOCK HAZARD! Power supply uses double pole/neutral fusing.
Lamp precautions
Before opening the lamp door or handling the lamp, make sure that everyone within the vicinity of the
projector is wearing the required protective clothing.
Warning! If not avoided, the following could result in death or serious injury.
• EXPLOSION HAZARD! Always wear protective safety clothing (gloves, jacket, face shield)
approved by the manufacturer whenever the lamp door is open or when handling the lamp. Any
local or federal specifications take precedence over Christie's protective clothing
recommendations.
• Do not open the lamp door while the lamp is on.
• EXPLOSION HAZARD! Allow sufficient time for the lamp to cool down before powering down the
product, disconnecting it from AC, and opening the lamp door.
• EXPLOSION HAZARD! Lamps and bare bulbs, even when packaged, may explode if dropped or
mishandled.
Introduction
CP2415-Xe Installation and Setup Guide 7
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Light intensity hazard distance
This projector has been classified as Risk Group 3 as per the IEC 62471-5:2015 standard due to
possible hazardous optical and thermal radiation being emitted.
Warning! If not avoided, the following could result in serious injury.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam
within the hazard distance or install the product at the height that prevents exposure of
spectators' eyes within the hazard distance. The hazard zone must be no lower than 2.5 meters
(US installations) or 2.0 meters (global installations) above any surface upon which any persons
are permitted to stand and the horizontal clearance to the hazard zone must be a minimum 1.0
meters.
• EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.
The following show the zones for ocular and skin hazard distances.
• A—Hazard zone. The region of space where the projection light from the projector is above
emission limits for Risk Group 2. The light intensity may cause eye damage after a momentary
or brief exposure (before a person can avert his or her eyes away from the light source). The
light may cause skin burns to occur.
• B—Hazard distance. Operators must control access to the beam within the hazard distance or
install the product preventing potential exposure of the spectators' eyes from being in the
hazard distance.
• C—No access zone. Horizontal clearance of the no access zone must be a minimum of 1.0
meters.
• D—Vertical distance to hazard zone. The hazard zone must be no lower than 2.5 meters (US
installations) or 2.0 meters (global installations) above any surface upon which any persons
are permitted to stand.
If the vertical distance to hazard zone requirement (Zone D) is satisfied, the horizontal
clearance distance (Zone C) is not needed.
• E—Represents the top view of the projector.
Introduction
CP2415-Xe Installation and Setup Guide 8
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
• F—Represents the side view of the projector.
Projection lens Part number
1.05:1 DLP CINE zoom 108-319104-XX
1.2-1.75:1 DLP CINE zoom 108-350109-XX
1.39-1.9:1 DLP CINE zoom 108-327103-XX
1.5-2.2:1 DLP CINE zoom 108-329105-XX
1.75-2.4:1 DLP CINE zoom 108-321107-XX
1.9-3.0:1 DLP CINE zoom 108-328104-XX
2.4-3.9:1 DLP CINE zoom 108-322108-XX
3.9-6.5:1 DLP CINE zoom 108-323109-XX
CP2415-Xe hazard distances
Hazard
distance
(m)
Throw ratio
Due to the requirements of IEC 62471-5, a minimum of 1 meter hazard distance must be maintained.
Introduction
CP2415-Xe Installation and Setup Guide 9
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Product labels
Learn about the labels that may be used on the product. Labels on your product may be yellow or
black and white.
General hazards
Hazard warnings also apply to accessories once they are installed in a Christie product that is
connected to power.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this product to rain or moisture.
Do not alter the power plug, overload the power outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Warning! If not avoided, the following could result in death or serious injury.
Electric shock hazard. To avoid personal injury, disconnect all power sources before
performing maintenance or service.
Electrocution hazard. To avoid personal injury, always disconnect all power sources
before performing maintenance or service procedures.
Explosive material hazard. To avoid personal injury, disconnect all power sources
before performing maintenance or service, and wear Christie-approved protective
clothing.
Optical radiation hazard. To avoid personal injury, never look directly at the light
source.
Voltage hazard. To avoid personal injury, always disconnect all power sources before
performing maintenance or service procedures.
Introduction
CP2415-Xe Installation and Setup Guide 10
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Table des matières
Autres manuels Christie Projecteur
Christie
Christie Projector Manuel utilisateur
Christie
Christie Vivid LX41 Manuel utilisateur
Christie
Christie GraphXMASTER DLV1400-DX Manuel utilisateur
Christie
Christie J Series Manuel utilisateur
Christie
Christie DS+750 Manuel utilisateur
Christie
Christie CP2215 Manuel utilisateur
Christie
Christie LX380 Manuel utilisateur
Christie
Christie HS 2K Series Manuel utilisateur
Christie
Christie Mirage S+14K Manuel utilisateur
Christie
Christie TPC-60 Manuel utilisateur
Christie
Christie L2K1500 Manuel utilisateur
Christie
Christie DS+6K Manuel utilisateur
Christie
Christie DWU760-iS Instructions de montage
Christie
Christie Mirage S+ 4K Manuel utilisateur
Christie
Christie Mirage 10000 Manuel utilisateur
Christie
Christie CP2220 Manuel utilisateur
Christie
Christie GS Series Manuel utilisateur
Christie
Christie E Series Manuel utilisateur
Christie
Christie CineLife+ RGB PLF CP4450-RGB Instructions de montage
Christie
Christie Roadie 25K Manuel utilisateur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
