Baincut Medium Page 7
Before initial startup, personnel have to read and understand all instructions contained within the
supplied documentation.
Equipment obligation: The operating company is required to equip personnel with the necessary protective
clothing as follow:
Safety shoes.
Safety goggles
2.5 Protection for Third parties
The operating company must also make persons who are not charged with the operating or maintenance of
the equipment aware of the dangers.
2.6 Common Sense safety
Accidents frequently occur due to carelessness or lack of knowledge. To avoid potential problems, review
the information in the section before attempting to install, setup, operate, or maintain this equipment. Think
safety at all the times. Do not let familiarity with the equipment lead to unsafe short cuts. The following
common sense safety practices must be observed at all times.
1. Follow all procedures and precautions in the manual carefully and completely.
2. Only attempt repair or adjustments for which proper training has been completed.
3. Always observe all safety warnings and notices on the machine and in the manual.
4. Do not remove or otherwise alter any guards or panel unless the machine is completely shut
down and has been made inoperable. Be sure to replace these items before restarting the
machine.
5. Never operate the equipment without guards and safety mechanisms in place and functional.
6. Do not allow foreign object to fall into machine.
7. Always use the proper tools for performance of any operation on the machine. Whenever
feasible, use voltage-isolated tools.
8. Do not touch any parts of the machine which may have become hot during operation.
9. Do not wear neck ties, jewelry, loose clothing, and long hair.
10. Wear or use gloves, goggles, safety shields, ear protection, and other employer recommended
safety equipment. Wear protective clothing to prevent burns.
11. Disconnect power and lock out all switches before attempting to adjust or manipulate any
moving parts or mechanism on the equipment.
12. Be aware that there are high voltages in this device when power is connected. Power must be
disconnected when the device is being repaired. However, because there are certain checks and
adjustment that can be made only with any power connected, it is imperative that only trained
personnel, aware of the safety hazards involved and familiar with this type of work and
necessary safety precautions, be permitted to perform this work.
13. Maintain good housekeeping practices to prevent slips, falls, cuts, burns, and other possible
accidents. Keep the area all necessary items properly organized.
14. Even though the plant may be equipped with automatic sprinklers or other means of the fire
protection, portable fire extinguishers should be available to the machine operator. To be
effective, portable extinguishers must be reliable, the proper type for each class of fire that may
