Checkpoint Quantum 6000 Manuel utilisateur

[Classification: Protected]

24 October 2021

6000 AND 7000

APPLIANCES

REPLACING AC POWER

SUPPLY UNITS

Check Point Copyright Notice

licensing restricting their use, copying, distribution, and decompilation. No part of this product or related

documentation may be reproduced in any form or by any means without prior written authorization of Check

Point. While every precaution has been taken in the preparation of this book, Check Point assumes no

responsibility for errors or omissions. This publication and features described herein are subject to change

without notice.

RESTRICTED RIGHTS LEGEND:

Use, duplication, or disclosure by the government is subject to restrictions as set forth in subparagraph (c)

(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and FAR

52.227-19.

TRADEMARKS:

Refer to the Copyright page for a list of our trademarks.

Refer to the Third Party copyright notices for a list of relevant copyrights and third-party licenses.

Important Information

Latest Software

We recommend that you install the most recent software release to stay up-to-date with the

latest functional improvements, stability fixes, security enhancements and protection against

new and evolving attacks.

Certifications

For third party independent certification of Check Point products, see the Check Point

Certifications page.

Check Point 6000 and 7000 Appliances Replacing AC Power Supply Units

For more about this release, see the home page.

Latest Version of this Document in English

Download the latest version of this document in PDF format.

Feedback

Check Point is engaged in a continuous effort to improve its documentation.

Please help us by sending your comments.

Revision History

Date Description

24 October 2021 Updated a note that PSUs on an appliance must be of the same type

30 April 2020 Updated with 6700 and 7000 appliances

03 February 2020 First release of this document

Table of Contents

6000 and 7000 Appliances Replacing AC Power Supply Units|4

Table of Contents

6000 and 7000 Appliances Replacing AC Power Supply Units

6000 and 7000 Appliances Rear Panel

6500

6600/6700/6900

6800

7000

Removing an AC Power Supply Unit

Installing an AC Power Supply Unit

Using the Restraint Clip

6000 and 7000 Appliances Replacing AC Power Supply Units

6000 and 7000 Appliances Replacing AC Power Supply Units|5

6000 and 7000 Appliances

Replacing AC Power Supply Units

These Check Point appliances have a redundant Power Supply Unit (PSU).

n6500 appliances

n6600 appliances

n6700 appliances

n6800 appliances

n6900 appliances

n7000 appliances

If necessary, you can replace a PSU on these appliances. Note that both PSUs on an appliance must be of

the same type (both AC). Mixing AC and DC PSUs is not supported and can cause damage to the

appliance.

Important - Make sure you are electromagnetically grounded before you install,

uninstall, or replace a PSU. ESD (electrostatic discharge) can damage the appliance.

6000 and 7000 Appliances Rear Panel

6500

6600/6700/6900

6000 and 7000 Appliances Replacing AC Power Supply Units

6000 and 7000 Appliances Replacing AC Power Supply Units|6

6800

7000

Item Component Description

1 Release lever Used to remove the power supply unit

2 Extraction

handle

Used to remove the power supply unit

3 LED indicator for

each power

supply unit

Off - Power supply is not connected to an electric outlet

nOn (Amber) - Power off

nOn (Green) - Power on

nOn (Red) - Failure

4 Power supply

unit/s

Connect to an electric outlet.

In 6500, 6700 Base, 6800, and 7000 Base appliances, one module

is included. An optional dual redundant hot-swappable power

supply is available.

In 6600, 6700 Plus, 6900, and 7000 Plus appliances two modules

are supplied.

You can use the cable restraints/clips to avoid accidental removal

of the power supply cable.

5 Alarm off button

for power supply

units

If a power supply cable is not connected to the outlet, an alarm

sounds continuously. Press this button to turn off the alarm.

6000 and 7000 Appliances Replacing AC Power Supply Units

6000 and 7000 Appliances Replacing AC Power Supply Units|7

Removing an AC Power Supply Unit

Before you remove a Power Supply Unit, we recommend that you make sure that either:

nThe other power supply is installed and connected to a working power source

nShutdown the appliance

To remove a Power Supply Unit:

1. Remove the power cord from the Power Supply Unit.

2. If the alarm sounds, press the alarm off button to the right of the Power Supply Units.

The alarm stops.

3. While holding the release lever, pull the extraction handle to remove the Power Supply Unit.

Note - Remove the Power Supply Unit only with the extraction handle to prevent any possible damage.

Installing an AC Power Supply Unit

To install a replacement Power Supply Unit:

1. Insert the Power Supply Unit into the power supply slot.

2. Push the Power Supply Unit in until the release lever clicks.

6000 and 7000 Appliances Replacing AC Power Supply Units

6000 and 7000 Appliances Replacing AC Power Supply Units|8

3. Insert the power cord into the power supply socket.

4. Make sure that the power LED is illuminated.

Using the Restraint Clip

The 6500, 6600, 6800, 6900, and 7000 appliances have a power cable restraint clip attached to the Power

Supply Unit (PSU). Use the restraint clip to prevent accidental removal of the power cable.

To secure the restraint clip on the power supply cable:

1. Make sure the restraint clip is in the open position (upward).

2. Connect the power supply cable to the power supply inlet on the PSU.

6000 and 7000 Appliances Replacing AC Power Supply Units

6000 and 7000 Appliances Replacing AC Power Supply Units|9

3. Push down on the restraint clip to close it and secure the power supply cable.

Item Description

1 Restraint clip in the open position (upward)

2 Restraint clip in the closed position

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Checkpoint Alimentation

Checkpoint

Checkpoint Quantum LightSpeed Appliance QLS250 Manuel utilisateur

Checkpoint

Checkpoint QUANTUM SMART-1 Manuel utilisateur

Checkpoint

Checkpoint Smart-1 series Mode d’emploi

Checkpoint

Checkpoint QUANTUM SMART-1 6000-L Manuel utilisateur

Checkpoint

Checkpoint 15000 Manuel utilisateur

Checkpoint

Checkpoint TE250X Manuel utilisateur

Checkpoint

Checkpoint Smart-1 series Mode d’emploi

Checkpoint

Checkpoint TCPP9000 Manuel utilisateur

Checkpoint

Checkpoint 4800 Manuel utilisateur

Checkpoint

Checkpoint Smart-1 series Manuel utilisateur

Manuels Alimentation populaires d'autres marques

Monacor

Monacor PS-12CCD Manuel utilisateur

VOLTIMA

VOLTIMA MagicBox 15 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6032A Manuel utilisateur

Miller

Miller Auto Deltaweld 452 Manuel utilisateur

BCP

BCP PUOUBK Feuille d'instructions

HC 2210 Manuel utilisateur

Puls

Puls CT5.241 Manuel utilisateur

OCZ

OCZ ZX1250W Manuel utilisateur

iseg

iseg ECH 238 Manuel utilisateur

Power

Power XXL A Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 6631B Manuel utilisateur

Renogy

Renogy PHOENIX 300 Manuel utilisateur

HP 6200B Manuel de service

Epson

Epson Stylus Scan 2500 Manuel d'utilisation

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manuel utilisateur

Puls

Puls MiniLine ML50.100 Manuel utilisateur

Puls

Puls AS-Interface SLA4.100 Manuel utilisateur

Kenwood

Kenwood PS-60 Manuel utilisateur