Checkpoint IPS-1 Manuel utilisateur

IPS-1

™ Quick Start Guide

Includes Check Point Software Blades

Power Up Your Check Point IPS-1 Appliance

• Connect the power cable to the power port on the IPS-1 appliance

rear panel and plug it into a power outlet.

• Turn the power on.

Connect Your PC for Initial Setup

• Initial setup must be done from a PC connected to the

appliance’s internal interface via the included Ethernet cable. After

completing the initial connection, the First Time Conﬁguration Wizard

will guide you through the process of conﬁguring the appliance.

• Before continuing, make sure your PC is conﬁgured correctly.

Figure 1: Internet Protocol (TCP/IP) Properties

For Windows XP Operating Systems

• Click

> Settings > Control Panel

> Network Connections.

• Double-click

Local Area Connection.

• In the General tab, click Properties.

• In the IP address ﬁeld, enter

192.168.1.2.

• In the Subnet mask ﬁeld, enter

255.255.255.0.

• Leave the Default gateway and

DNS settings ﬁelds empty.

• Click OK and close the

dialog boxes.

Figure 2: Internet Protocol (TCP/IP) Properties

For Windows Vista Operating System

• Click

> Control Panel

> Network and Internet

> Network and Sharing Center

> Manage network connections.

• Right-click Local Area Connection,

and then click Properties. If you

are prompted for an administrator

password or conﬁrmation, type the

password or provide conﬁrmation.

• Click the Networking tab.

Under This connection uses the

following items, click Internet

Protocol Version 4 (TCP/IPv4),

and then click Properties.

• In the IP address ﬁeld, enter

192.168.1.2.

• In the Subnet mask ﬁeld, enter 255.255.255.0.

• Leave the Default gateway and DNS settings ﬁelds empty.

• Click OK and close the dialog boxes.

Conﬁgure Your IPS-1 Appliance

• Connect a serial cable to the

console output of the appliance, or

open an ssh session from a console

(for example, using PuTTY for

Windows or the SSH command

from a Linux/Unix machine).

See the Getting Started Guide for

more details.

• Log in with the default system

administrator login name/

password, admin/admin.

• After logging in the ﬁrst time and

changing the default login name

and password, you can start the

ﬁrst time conﬁguration wizard by

typing sysconﬁg at the cpmodule

prompt. The wizard will guide

you through the initial system

conﬁguration process. Enter the

required parameters until the

system indicates it has completed

conﬁguring the device.

Figure 3: IPS-1 Appliance Login page.

Figure 4: First Time Conﬁguration Wizard−Welcome Page.

Figure 5: First Time Conﬁguration Wizard−Summary Page.

Registration and Technical Support

Appliance Registration

IPS-1 appliances require a license to be installed prior to operation.

To license and register your appliance, please visit:

http://register.checkpoint.com/cpapp

Appliance User Center

For further information about the IPS-1 appliance, see:

https://usercenter.checkpoint.com/usercenter/login/ips-1.

For technical assistance, contact Check Point

24 hours a day, seven days a week at:

+1 972-444-6600 (Americas)

+972 3-611-5100 (International)

IPS-1

™ Quick Start Guide

P/N: 704118

Check Point, the Check Point logo and IPS-1 are trademarks or registered trademarks of Check Point

Software Technologies Ltd. or its afﬁliates. All other product names mentioned herein are trademarks or

registered trademarks of their respective owners. The products described in this document are protected by

U.S. Patent No. 5,606,668, 5,835,726, 6,496,935, 6,873,988, and 6,850,943 and may be protected by other

U.S. Patents, foreign patents, or pending applications.

www.checkpoint.com

Table des matières

Autres manuels Checkpoint Matériel réseau

Checkpoint

Checkpoint 600 Manuel utilisateur

Checkpoint

Checkpoint UTM-1 Edge W16 Manuel utilisateur

Checkpoint

Checkpoint 910 Manuel utilisateur

Checkpoint

Checkpoint 6000 Series Manuel utilisateur

Checkpoint

Checkpoint L-71 Mode d’emploi

Checkpoint

Checkpoint QUANTUM MAESTRO Manuel utilisateur

Checkpoint

Checkpoint MHO175 Manuel utilisateur

Checkpoint

Checkpoint TE250X Manuel utilisateur

Checkpoint

Checkpoint 21000 Series Mode d’emploi

Checkpoint

Checkpoint Smart-1 5050 Mode d’emploi

Checkpoint

Checkpoint Smart-1 225 Manuel utilisateur

Checkpoint

Checkpoint 1500 Series Mode d’emploi

Checkpoint

Checkpoint 5000 Series Manuel utilisateur

Checkpoint

Checkpoint 21000 Appliances G-70 Manuel utilisateur

Checkpoint

Checkpoint Smart-1 205 Manuel utilisateur

Checkpoint

Checkpoint 730 Manuel utilisateur

Checkpoint

Checkpoint Quantum SMART-1 600-M Manuel utilisateur

Checkpoint

Checkpoint UTM-1 U-5 Manuel utilisateur

Checkpoint

Checkpoint 5000 Series Manuel utilisateur

Checkpoint

Checkpoint 770 Manuel utilisateur

Checkpoint

Checkpoint Smart-1 625 Mode d’emploi

Checkpoint

Checkpoint QUANTUM SMART-1 Manuel utilisateur

Checkpoint

Checkpoint QUANTUM FORCE 19000 Manuel utilisateur

Checkpoint

Checkpoint 21000 Appliances G-70 Mode d’emploi

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur