Charder HM201M Manuel utilisateur
1
USER MANUAL
HM201M
Height Meter
Please keep the instruction manual at hand all the time for future reference.
2
Explanation of Graphic Symbols on Label/Packaging
Caution, consult
accompanying documents
before use
Authorized
representative in the
European Community
Manufacturer of medical
device
Indicates that device
conforms to Regulation
(EU) 2017/745. Four
digit number refers to
Notified Body.
Manufacturing year of
medical device
Indicates that device is
a medical device
Device catalogue number
Serial number
Manufacturer's batch or lot
number
Unique Device Identifier
Carefully read user manual
before installation and usage,
and follow instructions for
use.
Copyright Notice
Charder Electronic Co., Ltd.
No.103, Guozhong Rd., Dali Dist., Taichung City 41262 Taiwan
Tel: +886-4-2406 3766
Fax: +886-4-2406 5612
Website: www.chardermedical.com E-mail: info_cec@charder.com.tw
Copyright© Charder Electronic Co., Ltd. All rights reserved.
This user manual is protected by international copyright law. All content is licensed, and
usage is subject to written authorization from Charder Electronic Co., Ltd. (hereinafter
Charder) Charder is not liable for any damage caused by a failure to adhere to requirements
stated in this manual. Charder reserves the right to correct misprints in the manual without
prior notice, and modify the exterior of the device for quality purposes without customer
consent.
Charder Electronic Co., Ltd.
No. 103, Guozhong Rd., Dali Dist.,
Taichung City, 41262 Taiwan
3
CONTENTS
I. Safety Notes .......................................................................... 4
A. General Information ............................................................ 4
II. Installation........................................................................... 5
With Bracket .......................................................................... 5
Without Bracket...................................................................... 6
Attaching to compatible Charder scales ..................................... 7
III. Using Device ....................................................................... 9
IV. Product Specifications ........................................................11
V. Declaration of Conformity ....................................................12
4
I. Safety Notes
A. General Information
Thank you for choosing this Charder Medical device. It is designed to be
easy and straightforward to operate, but if you encounter any problems
not addressed in this manual, please contact your local Charder service
partner.
Before beginning operation of the device, please read this user manual
carefully, and keep it in a safe place for reference. It contains important
instructions regarding installation, proper usage, and maintenance.
Intended Use
This device is intended to measure the height of subjects, for diagnosis of
height-related issues by professionals.
General Handling
Device should be placed on stable, flat, solid, non-slippery surface.
Ensure all parts are properly locked and tightened before operating
the device.
Safety Instructions
Expected service life: 5 years.
Cleaning
Device surface should be cleaned using alcohol-based wipes.
Corrosive cleansing liquids should not be used. Pressure-washers
should not be used.
Warranty/Liability
The period of warranty shall be eighteen (18) months, beginning on
the date of purchase. Please retain your receipt as proof of purchase.
No responsibility shall be accepted for damage caused through any
of the following reasons: unsuitable or improper storage or use,
incorrect installation or commissioning by the owner or third parties,
natural wear and tear, changes or modifications, incorrect or
negligent handling.
Incident Reporting
Any serious incident that has occurred in relation to the device
should be reported to the manufacturer, EU representative (if device
is used in EU member state), and competent authority of
user/subject's member state.
5
II. Installation
With Bracket
1. Make a mark 54 cm off the
ground.
2. Align the mark with one hole,
and use it and bracket to mark
position for second hole.
3. Drill through both markings.
4. Insert plastic nails firmly.
5. Screw bracket to wall
6. Screw height rod to bracket
6
Without Bracket
1. Make a mark 51.5 cm off the
ground.
2. Extend the height rod fully, and
mark the top hole position
3. Drill through both markings to
secure HM201M to wall..
7
Attaching to compatible Charder scales
MS39-series
1. Attach bracket
2. Screw height rod to bracket
8
MS49-series
1. Attach fixing block using cross
head screws
2. Attach HM201M to fixing block
using flat head screws
Parts
Fixing block*2
Flat head screw*2
Cross head screw*2
9
III. Using Device
Over 121cm
1. Extend rod
2. Raise headpiece to horizontal
position
3. Head reading should be taken at
point A
A
A
10
Under 120 cm
1. Fold down headpiece and press
on buckle
2. While pressing buckle, press
down headpiece
3. Height reading should be taken
at point B
B
Table des matières
Autres manuels Charder Instrument de mesure
Charder
Charder HM101M Manuel utilisateur
Charder
Charder U310 Manuel utilisateur
Charder
Charder MG 4800 Manuel utilisateur
Charder
Charder HM80P Manuel utilisateur
Charder
Charder HM 101M Manuel utilisateur
Charder
Charder HM200PW Manuel utilisateur
Charder
Charder MA801 Manuel utilisateur
Charder
Charder HM200P Manuel utilisateur
Charder
Charder HM200D Manuel utilisateur
Charder
Charder HM230M Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur