Channel Vision A0360 Manuel utilisateur

A0360

100W Flush Mount Audio Amplifier

with Bluetooth, Cat5 Audio and Tos-Link

Digital Input Source

The A0360 Table-Top Amplifier can be used with Channel Vision’s CAT5

audio hubs to provide a powerful 100 Watt Amplifier, 50Watts per channel in

the listening zone with an output for a powered sub-woofer.

Features:

100 Watt integrated class D amplifier

Optical Tos-Link Local audio input from a TV or music system

Cat-5 input for use with Channel Vision’s CAT5 audio systems

Volume Control & source selection using A0125 keypad

IR Remote receiver built in

Integrated IR Repeating

Cascade multiple amplifiers together with individual control or

at the same time

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN !

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions for future reference.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this device near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with these

instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus that produce heat.

9. This apparatus must not be exposed to dripping or splashing water and

no objects filled with liquids, such as vases, shall be placed on the

apparatus.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Unplug this apparatus during lightning storms or when unused for long

periods of time.

12.

Warning: To reduce the risk of electric shock, do not remove the cover (or

back), no user serviceable parts inside, refer servicing to qualified service

personnel.

IR Receiver EYE

IR Extension 3.5mm

Link Button

Optical Audio input

Power input front or back

24VDC, 2.5Amp

8 ohm

Speaker Output

CAT5 Input

Connect the

output of your

Cat5 Output

Can also be used as keypad input

Rear Power Access Green connector located under top circuit board.

16AWG recommended. 24VDC 2.5Amp

The A0360 Table-Top Amplifier can be used with Channel Vision’s CAT5

audio hubs to provide a powerful 100 Watt Amplifier, 50Watts per channel in

the listening zone with an output for a powered sub-woofer.

Features:

100 Watt integrated class D amplifier

Optical Tos-Link Local audio input from a TV or music system

Cat-5 input for use with Channel Vision’s CAT5 audio systems

Volume Control & source selection using A0125 keypad

IR Remote receiver built in

Integrated IR Repeating

Cascade multiple amplifiers together with individual control or

at the same time

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN !

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions for future reference.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this device near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with these

instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus that produce heat.

9. This apparatus must not be exposed to dripping or splashing water and

no objects filled with liquids, such as vases, shall be placed on the

apparatus.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Unplug this apparatus during lightning storms or when unused for long

periods of time.

12.

Warning: To reduce the risk of electric shock, do not remove the cover (or

back), no user serviceable parts inside, refer servicing to qualified service

personnel.

IR Receiver EYE

IR Extension 3.5mm

Link Button

Optical Audio input

Power input front or back

24VDC, 2.5Amp

8 ohm

Speaker Output

CAT5 Input

Connect the

output of your

Cat5 Output

Can also be used as keypad input

Rear Power Access Green connector located under top circuit board.

16AWG recommended. 24VDC 2.5Amp

A0501, A0502, or A0505 ... Remote control. Contains IR

codes for controlling the Amplified Wireless Audio Receiver

as well as many other Channel Vision audio products.

A0125 keypad controller ... IR repeating keypad.

A0125 contains the IR codes to operate the volume controls

in the P-2014 or P-2044 Matrix. You may also use a 3.5mm

IR receiver on the faceplate. When using the faceplate IR

receiver, you will need to use the A0505 remote control

which contains the IR codes to control the A0360. IR codes

can be downloaded from www.channelvision.com, or

learned from an A0505 remote control.

IR Volume can be learned from your existing TV remote

3.5mm IR-receiver

The

Pwr Mute

Vid 1

Vid 2

Vid 3

Vid 4

Vol

CHANN EL VISION

ZONE

POWER

MUTE

VOL

MODEL

A0501

POWER

Accessories & Complementary Products (sold separately)

In-wall, In-ceiling Speakers, and Free Standing

Speakers... Channel Vision offers a full line of premium

speakers. These speakers are perfect for whole-house music

or home theater applications.

Accessories (In the Box)

24VDC, 2.5 Amp Power Supply

4ea. Self Tapping Screws

Speaker Terminal

Connector

Teach the amplifier your Tv’s volume commands

Remote Control Learning

1. Remove Power to the A0360

2. Push and keep holding “link button” while you plug in the power.

*Do not release the link button until the IR codes are completely

programmed.

3. Point your remote control at the A0360 faceplate IR Receiver

and press the buttons for volume up, volume down, and mute

on the tv remote.

**Only use 1 quick press momentarily push of each button or it will

fail learning

4. Release the link button

Volume Level Setup

1. Press link button for 10 seconds to change volume control mode

(do not connect Bluetooth until volume level is complete).

Mode 1: all sources have same volume level. (this will be set as default

after qc)

Mode 2: each audio source has individual volume level settings.

Example: Bluetooth Amp volume level is set to maximum, Volume is

controlled by the smart phone volume controls. Tos-link input is

set to variable volume by changing the Amp volume.

Reset Volume and Bluetooth

1. Push link button for 20 seconds to reset all volume levels and

reset bluetooth.

Test the volume control with your tv remote and be amazed.

Link to A0360 when Security is ON

1. Press “link button” for pairing bluetooth while security is on to

connect the Bluetooth on your phone to the A0360 receiver

and listen to your favorite jams.

*2-Gang box decorator plate is a standard size sold separately

A0501, A0502, or A0505 ... Remote control. Contains IR

codes for controlling the Amplified Wireless Audio Receiver

as well as many other Channel Vision audio products.

A0125 keypad controller ... IR repeating keypad.

A0125 contains the IR codes to operate the volume controls

in the P-2014 or P-2044 Matrix. You may also use a 3.5mm

IR receiver on the faceplate. When using the faceplate IR

receiver, you will need to use the A0505 remote control

which contains the IR codes to control the A0360. IR codes

can be downloaded from www.channelvision.com, or

learned from an A0505 remote control.

IR Volume can be learned from your existing TV remote

3.5mm IR-receiver

The

Pwr Mute

Vid 1

Vid 2

Vid 3

Vid 4

Vol

CHANN EL VISION

ZONE

POWER

MUTE

VOL

MODEL

A0501

POWER

Accessories & Complementary Products (sold separately)

In-wall, In-ceiling Speakers, and Free Standing

Speakers... Channel Vision offers a full line of premium

speakers. These speakers are perfect for whole-house music

or home theater applications.

Accessories (In the Box)

24VDC, 2.5 Amp Power Supply

4ea. Self Tapping Screws

Speaker Terminal

Connector

Teach the amplifier your Tv’s volume commands

Remote Control Learning

1. Remove Power to the A0360

2. Push and keep holding “link button” while you plug in the power.

*Do not release the link button until the IR codes are completely

programmed.

3. Point your remote control at the A0360 faceplate IR Receiver

and press the buttons for volume up, volume down, and mute

on the tv remote.

**Only use 1 quick press momentarily push of each button or it will

fail learning

4. Release the link button

Volume Level Setup

1. Press link button for 10 seconds to change volume control mode

(do not connect Bluetooth until volume level is complete).

Mode 1: all sources have same volume level. (this will be set as default

after qc)

Mode 2: each audio source has individual volume level settings.

Example: Bluetooth Amp volume level is set to maximum, Volume is

controlled by the smart phone volume controls. Tos-link input is

set to variable volume by changing the Amp volume.

Reset Volume and Bluetooth

1. Push link button for 20 seconds to reset all volume levels and

reset bluetooth.

Test the volume control with your tv remote and be amazed.

Link to A0360 when Security is ON

1. Press “link button” for pairing bluetooth while security is on to

connect the Bluetooth on your phone to the A0360 receiver

and listen to your favorite jams.

*2-Gang box decorator plate is a standard size sold separately

Using the A0360 Behind a TV or as a Stand Alone System

The A0360 can be mounted behind a wall-mounted TV to power in-wall speakers.

By connecting the audio outputs from the TV to the Optical input of the A0360, the

TV’s audio signal will be amplified to the in-wall speakers. If the TV has variable

audio outputs, the sound level will simply be controlled by the TV’s volume

buttons. If the TV only offers a fixed audio output, A0360 volume level can be

adjusted by connecting an IR receiver on the front faceplate or using a compatible

remote such as model A0505. The A0360 can be cascaded to multiple rooms and

controlled in each room or all at once.

Variable

Optical input

from the TV

The TV volume control determines

the volume of the speakers

Front Left Front Right

Integrated IR repeating

allows TV remote to

control TV from here

Power supply front or back

A0360

8 ohm

Speaker

Output

CAT5 Input Connect

the output of your

CAT5 audio hub here

Cat5 Output

Extend to multiple

amplifiers in multiple

zones

Rear Power Access Green connector located under top

circuit board. 16AWG recommended. 24VDC 2.5Amp

IR Sensor

Remote

IR-receiver

Bluetooth

Link Button

Optical Input

The A0360 is an in-wall 100W amplifier with 3 inputs:

Bluetooth 4.2, Optical Audio, and Cat5 Audio. It has a 100W

(50W per channel) Class D Stereo Amplifier. Its audio priority

levels are Bluetooth, Optical, and Cat5. Complete with both

front and back power access.

Front Power

Access

L R

- + - +

IR extender

Using the A0360 Behind a TV or as a Stand Alone System

The A0360 can be mounted behind a wall-mounted TV to power in-wall speakers.

By connecting the audio outputs from the TV to the Optical input of the A0360, the

TV’s audio signal will be amplified to the in-wall speakers. If the TV has variable

audio outputs, the sound level will simply be controlled by the TV’s volume

buttons. If the TV only offers a fixed audio output, A0360 volume level can be

adjusted by connecting an IR receiver on the front faceplate or using a compatible

remote such as model A0505. The A0360 can be cascaded to multiple rooms and

controlled in each room or all at once.

Variable

Optical input

from the TV

The TV volume control determines

the volume of the speakers

Front Left Front Right

Integrated IR repeating

allows TV remote to

control TV from here

Power supply front or back

A0360

8 ohm

Speaker

Output

CAT5 Input Connect

the output of your

CAT5 audio hub here

Cat5 Output

Extend to multiple

amplifiers in multiple

zones

Rear Power Access Green connector located under top

circuit board. 16AWG recommended. 24VDC 2.5Amp

IR Sensor

Remote

IR-receiver

Bluetooth

Link Button

Optical Input

The A0360 is an in-wall 100W amplifier with 3 inputs:

Bluetooth 4.2, Optical Audio, and Cat5 Audio. It has a 100W

(50W per channel) Class D Stereo Amplifier. Its audio priority

levels are Bluetooth, Optical, and Cat5. Complete with both

front and back power access.

Front Power

Access

L R

- + - +

IR extender

Left Right

PRO

CHANN E L

VISIO N

Active Active

Active

Link

Out

Zone 1

Zone 2

Zone 3

Zone 4

Source 1 Source 2 Source 3 Source 4

Common IR

Source 4 IR

Source 3 IR

Source 2 IRSource 1 IR

IR Data

Power

CHANN EL VISIO N

Model P-2044

(Optional)

IR emitters

P-2044

A0327

CD player Sat Radio

Line level inputs

IR emitters

A0301

A0360 with a Multi-Room Audio Hub - Alternate Setup

The A0360 can accept the signal from Channel Vision’s CAT5 Audio Hubs,

such as the P-2044/P-2014. A0125 keypad can be wired to the CAT5 input

along with other input modules to accommodate more CAT5 Audio wiring

distribution with an amplifier located inside of the room/zone while sources

play in a remote room and throughout the home & controlled remotely.

A0125

(Rear)

Wiring Key

G - GreenWhite & OrangeWhite

RT - Orange (solid)

LT - Green (solid)

Note: Local input module

such as A0301

can be installed inline w/

the A0125 & P-2044 to

control Source Select,

Volume, & IR flashers on

the P-2044 source.

Power supply

18VDC Power supply

A0360

Using the A0360 with a CAT5 Audio Hub

The A0360 can accept the signal from one Channel Vision’s CAT5 Audio Hubs,

such as the P-2044. Audio and IR signals are transmitted through the CAT5

cable, while power is connected directly to the back of the A0360.

Power supply

Left Right

PRO

CHANN E L

VISIO N

Active Active

Active

Link

Out

Zone 1

Zone 2

Zone 3

Zone 4

Source 1 Source 2 Source 3 Source 4

Common IR

Source 4 IR

Source 3 IR

Source 2 IRSource 1 IR

IR Data

Power

CHA NN EL VISIO N

Model P-2044

(Optional)

IR emitters

P-2044

A0327

CD player Sat Radio

Line level inputs

IR emitters

A0301

CD player

Left Right

PRO

CHANN E L

VISIO N

Active Active

Active

Link

Out

Zone 1

Zone 2

Zone 3

Zone 4

Source 1 Source 2 Source 3 Source 4

Common IR

Source 4 IR

Source 3 IR

Source 2 IRSource 1 IR

IR Data

Power

CHANN EL VISIO N

Model P-2044

(Optional)

IR emitters

P-2044

A0327

CD player Sat Radio

Line level inputs

IR emitters

A0301

A0360 with a Multi-Room Audio Hub - Alternate Setup

The A0360 can accept the signal from Channel Vision’s CAT5 Audio Hubs,

such as the P-2044/P-2014. A0125 keypad can be wired to the CAT5 input

along with other input modules to accommodate more CAT5 Audio wiring

distribution with an amplifier located inside of the room/zone while sources

play in a remote room and throughout the home & controlled remotely.

A0125

(Rear)

Wiring Key

G - GreenWhite & OrangeWhite

RT - Orange (solid)

LT - Green (solid)

Note: Local input module

such as A0301

can be installed inline w/

the A0125 & P-2044 to

control Source Select,

Volume, & IR flashers on

the P-2044 source.

Power supply

18VDC Power supply

A0360

Using the A0360 with a CAT5 Audio Hub

The A0360 can accept the signal from one Channel Vision’s CAT5 Audio Hubs,

such as the P-2044. Audio and IR signals are transmitted through the CAT5

cable, while power is connected directly to the back of the A0360.

Power supply

Left Right

PRO

CHANN E L

VISIO N

Active Active

Active

Link

Out

Zone 1

Zone 2

Zone 3

Zone 4

Source 1 Source 2 Source 3 Source 4

Common IR

Source 4 IR

Source 3 IR

Source 2 IRSource 1 IR

IR Data

Power

CHA NN EL VISIO N

Model P-2044

(Optional)

IR emitters

P-2044

A0327

CD player Sat Radio

Line level inputs

IR emitters

A0301

CD player

LED Indications:

PWR LED: LED ON indicates Power to the amplifier is ON

Active LED: Red indicates no audio input - Amplifier is in standby.

Green indicates audio input is present.

Volume Control works only when this LED is green.

Specifications:

Power input: 24VDC, 2.5 amp, earth ground negative, 3 plug

UL approved transformer

Audio Output: 100 Watts/ 50 Watts x2

OHMS 8 ohms @ <1% THD

Frequency Response: 20-20kHz (+/-3dB)

Signal to Noise Ratio: >85dB

Subwoofer output frequency 20-80 Hz

Input Sensitivity: 50 mV RMS

Operating temperature: -8 ~ +130º C

Specifications subject to change without notice

Stripping and Connecting CAT5 Wire

Blade

CAT5

1. Place the CAT5 between the blade and the first notch of the J-110 tool.

CAT5 cable should be stripped with a proper stripping tool, such as Channel

Vision’s J-110 tool.

Slight

pressure

Rotate

1 turn only

2. Rotate the tool only once. Multiple

turns could damage the inner wires.

3. Inspect the inner wires for damage.

If any wires are cut start over at step 1.

Check for damage

Green/White - Left channel ground

Green - Left channel

Orange/White - Right channel ground

Blue - Signal

Blue/White

Orange - Right channel

Brown/White - Ground

Brown - 24V DC for A0125 power

TIA-568A RJ-45 Modular Plug for Audio Input Connector

Side view:

Top view:

A0127 or A0129 keypad

A4623

Rear

Pin 7: Ground

Pin 8: +VDC

Pin 4: IR signal

Pin 8: +VDC

Pin 7: Ground

Pin 4: IR signal

N.C.

Pin 8: +VDC

Pin 7: Ground

Pin 4: IR signal

Green/White

Green

Orange/White

Pin 4 Blue - IR Signal

Blue/White

Orange -

Pin 7 Brown/White - Ground

Pin 8 Brown - 12VDC

TIA-568A RJ-45 Modular Plug for IR Keypad or IR-2400 Input Connector

Side view:

Top view:

Autres manuels pour A0360

Autres manuels Channel Vision Amplificateur

Channel Vision

Channel Vision Aria A0350 Manuel utilisateur

Channel Vision

Channel Vision A-BUS AB-114 Manuel utilisateur

Channel Vision

Channel Vision Aria A0350 Manuel utilisateur

Channel Vision

Channel Vision A0240 Manuel utilisateur

Channel Vision

Channel Vision A-BUS AB-202 Manuel utilisateur

Channel Vision

Channel Vision ARIA A4623 Manuel utilisateur

Channel Vision

Channel Vision C-0314 Manuel utilisateur

Channel Vision

Channel Vision ARIA A0361 Manuel utilisateur

Channel Vision

Channel Vision Aria A1260 Manuel utilisateur

Channel Vision

Channel Vision CVT-2/8WB Manuel utilisateur

Channel Vision

Channel Vision A500 Manuel utilisateur

Channel Vision

Channel Vision CVT-10 PIA Manuel utilisateur

Channel Vision

Channel Vision A0240 Manuel utilisateur

Channel Vision

Channel Vision CVT-38BID Manuel utilisateur

Channel Vision

Channel Vision Central C-0315 Manuel utilisateur

Channel Vision

Channel Vision A0240 Manuel utilisateur

Channel Vision

Channel Vision A0362 Manuel utilisateur

Channel Vision

Channel Vision VDA-12 Manuel utilisateur

Channel Vision

Channel Vision CVT-15WB Manuel utilisateur

Channel Vision

Channel Vision P-2014 Manuel utilisateur

Channel Vision

Channel Vision A0240 Manuel utilisateur

Channel Vision

Channel Vision CVT-40BID Manuel utilisateur

Channel Vision

Channel Vision C-0310 Manuel utilisateur

Channel Vision

Channel Vision CVT-15PIA Manuel

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur