Chafon CF-UPS018 Manuel utilisateur
346WH Uninterrupted Power Supply
User Manual
Model: CF-UPS018
Preface
--------------------------------------------------------------------------------------------------------------------
Thank you for applying our multi-functional UPS, in case of power failure or you need
to charge on a travel, you can temporarily charge your electrical or digital devices with this
unit. This unit can provide USB, DC and AC output. You can keep laptops, appliances,
lights and more going for hours longer. Before using this unit, please read the user manual
carefully and keep it for reference
Directory
----------------------------------------------------------------------------------------------------------------------
1. PRODUCT INTRODUCTION
1.1 Introduction
1.2 Product parameters
1.3 Product description
1.4 Product accessories
2. USER GUIDE
2.1 For indoor use as an on line UPS
2.2 Used as a portable power source
2.3 The LED light can be used as a torch
2.4 Used as an emergency jump starter
3. How to charge the UPS
3.1 Charging through AC Wall charger
3.2 Charging from solar panel
3.3 Charging through 12V car charger
4. FAQ
5. SAFETY
1 PRODUCT INTRODUCTION
----------------------------------------------------------------------------------------------------------------------
1.1 Introduction
When power goes out for even a second it can result in data loss and hardware
damage, which can shorten equipment life expectancy. When you are outdoor or
traveling,you may worry about your devices are out of power and there is no AC power.
Now, you will never worry about this any more with the CF-UPS018 which is the most
ideal contingent companion both indoor and outdoor.
The CF-UPS018 is a compact portable multipurpose power source. As an on line
UPS with a built-in lithium battery (12V 31AH / 288WH), it can combine the outdoor
rechargeable power supply with the indoor computer. Although its size is only 1/10 ~ 1/5
of similar products its lifespan and capacity are 5 times and 10 times longer.
1.2 Product parameters
Item Model CF-UPS018
Capacity Lithium battery 12V 31Ah 346Wh
AC rated power 500W
Output Waveform Pure Sine Wave
AC Input Voltage 100V-240V 50/60Hz ;
AC Output Voltage 110V 60Hz
DC Output (4 ports) Total 12V/10A
USB Output (4 ports) Total 5V/6.2A
2 x Each set 5V/3.1A
LED Light 1W
Solar Panel Voltage 12.75V±0.075V
Overload, Short circuit protection, Fuse 8A
Size: 29*11*15cm
Weight 3.37 kg(7.4 lb)
1.3 Product description
Indicator
DC Output Indicate: DC port and USB port work status ( normal: Green, unusual:
Red )
Power / Fault : Indicate AC power supply status ( normal: Green, unusual: Red )
Battery indicator display low : Red light flash and buzzer ring
Overload: Red light flash ,buzzer ring, No power output
AC Charge: Indicate AC input charging status ( charging: Red,charging completed:
Green)
Solar Charge: Indicate solar input charging and car input charging status ( charging:
Red, charging completed:Green)
battery indicator:The display panel will show the battery capacity. When the
percentage shown is low, please charge the unit accordingly.
1.4 Product accessories
2. USER GUIDE
--------------------------------------------------------------------------------------------------------------
2.1 As an on line UPS backup for indoor use
It provides electricity backup and surge protection for desktop computers,
workstations, network devices and home entertainment systems when there is a power
fluctuation and surges, a storm causing a power cut, a power grid construction or a trip
causing by the high power switching equipment, which can safeguard valuable documents,
photos, videos, and music files from losing or damaging.
Plug in the AC input power cord to the wall socket and connect to the CF-UPS018.
Then connect your device to the UPS. Turn on AC mains power (wall socket) , then turn
on AC OUTOUT ON/OFF switch on UPS.
When AC power source from the power grid is normal , electricity from the AC mains
will be channeled to power the computer as well as to charge the CF-UPS018
during electrical or power from the ac mains is lost, the CF-UPS018 will switch over to the
lithium battery power to continuously provide power to the computer without discruption
Notices
Don’t connect the CF-UPS018 to equipment with the load that is over 500W or
overload will occur. When there is an overload, it will shutdown. You need to reduce your
total equipment load and try again.
In rare cases, when the UPS encounters an external short circuit or unusual power
usage, the external fuse will be burned. when this happen, you can just replace the fuse.
Fuse is 8A
2.2 Used as a high capacity portable power source
In your outdoor activities, you may need an AC/DC power source long time standby.
Now, you can easily provide the AC power, DC power anytime and everywhere for your all
kinds of device.
2.2.1How to provide power for AC appliances
Connect the power cable plug of the electrical to the AC outlet of the product, turn on
AC ON/OFF switch on the power button and the unit will start providing power to your
appliances
Notices:
Don’t connect the CF-UPS018 to equipment with the load that is over 500W.
UPS power supply process, AC charger green light every 5S flash once
2.2.2 How to provide power for DC digital appliances
Turn on DC ON/OFF switch. The LED light will be lighted up. Now the 12V DC port is
ready to be used. After using, remember to turn off the DC ON/OFF switch to prevent
power drain.
Notices:
Please confirm whether your DC12V appliance support charging with 5.5mm DC
header interface(the diameter of the DC port of the product is: 5.5mm) otherwise it is
unable to connect with the DC output, you can consult the electrical manufacturer, buy the
corresponding adapter and connect with it
The 12V DC output the maximum total current 10A, each DC output maximum
current 5A
2.2.3 How to provide power for USB digital appliances
Connect the standard USB cable to digital appliance to the USB output of the unit,
turn on DC OUTPUT ON/OFF switch, the USB port is ready to be used
NOTICE:
4xUSB port total current is 6.2A, divided into two set. Each set current is 3.1A,
When a USB port output 1A, the other USB port output 2.1A
Table des matières
Manuels UPS populaires d'autres marques
Pylontech
Pylontech Victron & Pylontech US5000 Manuel utilisateur
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur
Mecer
Mecer ME-1000-WTU Manuel utilisateur
Mustek
Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation
Emerson
Emerson Liebert NXL series Manuel utilisateur
MAKELSAN
MAKELSAN BOXER SERIES Manuel utilisateur
