Celluon PicoAir Manuel utilisateur
User Manual
Table of Contents
1. Safety Precautions
FCC Compliance Information
FCC Class Notice
FCC Caution
FCC RF Radiation Exposure Statement
Industry Canada Statement
CE Caution
IEC-60825-1 Caution
2. Certifications
3. Environmentally Friendly Disposal and Recycling
4. Package Contents
5. Product Features
6. Identifying Parts
7. Connecting PicoAir
a. Compatible Operating Systems
b. How to Connect
c. Switching Connection Mode
8. Making Adjustments
a. Volume Adjustment
b. Speaker / Earphone Usage
c. Laser Alignment
9. Charging the PicoAir
10. Troubleshooting
11. Specifications
12. Warranty
3
1. Safety Precautions
This product is not waterproof – avoid using it near water or wet places.
There is a risk of malfunction if product is used in places where sudden or extreme temperature changes occur.
Applying excessive force or impact to this product may result in product damage, and will void warranty.
Never attempt to disassemble or service this product yourself. Doing so can result in electrical shock and void warranty.
This is a Class 3R Laser product. For your safety, do not stare directly into the laser source. Doing so could damage your eyes.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference to another device.
2. This device must accept any interference received, including interference that may cause undesired operation.
FCC Class Notice
This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment.
This equipment generates, uses, and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur with special installation.
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to correct the
interference by one of the following measures:
■Reorient or relocate the receiving antenna.
■Increase separation between the equipment and receiver.
■Connect the equipment to an outlet on a circuit different from which the receiver is connected.
■Consult the dealer or an experienced radio/TV technician.
FCC Caution
Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
4
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum
distance of 20 centimeters between
the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada Statement
This device complies with Industry Canada license- exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
CE Caution
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
IEC-60825-1 Caution
Use of control or adjustments or performances of procedures other than those specified here in may result in hazardous radiation exposure.
5
2. Certifications
KC : MSIP-CRM-CLK-PICOAIR FCC ID : TCLPICOAIR CE1177
compliant
RoHS IC No : 10211A-PICOAIR IEC-60825-1 : Class 3R LaserIEC-60825-1 : Class 3R Laser
LASER APRETURE
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
Output: Red(90mW)/Blue(85mW)/Green(50mW)
λ= Red(639nm)/Blue(445nm)/Green(522nm)
Pulse frequency : 60Hz
IEC 60825-1:2007
3. Environmentally Friendly Disposal and Recycling
To protect the environment, dispose this product separately from household waste once it has
reached its end of life, or take it to your local electronic waste disposal center.
Built-in Battery
Use supplied USB power adapter to begin charging the battery.
Battery status is indicated by four blue LED indicators while charging.
(4 LED : 100% / 3 LED : 75% / 2 LED : 50% / 1 LED : 25%)
3140 mAh @ 3.7VBattery Capacity
Approx. 120 minutes (with continuous use)Battery Operating Time
Rechargeable Lithium-ion Polymer BatteryBattery Type
Approx. 270 minutesBattery Charging Time
Charging the Battery
6
4. Package Contents
PicoAir User Manual
Power
Adapter Holding Mount Pouch
5. Product Features
PicoAir is a laser-based HD pico projector that always stay focused and easily fits in your pocket.
It enables you to share contents from your mobile device onto any surface via Miracast or DLNA connection.
7
6. Identifying Parts
Touch-sensitive Volume Up
Touch-sensitive Volume Down
Backlit Battery Indicator Light Speaker
3.5mm Audio Out
Miracast or DLNA Switch
CHARGE – Micro USB port for charging
Battery Status Indicator
Power Button
Select Button
Reset Button
FCC ID : TCLPICOAIR CE1177 KC : MSIP-CMM-CLK-PICOAIR
IC : 10211A-PICOAIR
Model : PicoAir DC : 5V 2A Celluon, Inc. Made in Korea
LASER APRETURE
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
Output: Red(90mW)/Blue(85mW)/Green(50mW)
λ= Red(639nm)/Blue(445nm)/Green(522nm)
Pulse frequency : 60Hz
IEC 60825-1:2007
Laser radiates from this aperture
8
7. Connecting PicoAir
a. Compatible Operating Systems
Miracast DLNA
For Wireless Connection
Android OS 4.2 or later
Windows OS 8.1 or higher
Any OS that supports Screen Mirroring functionality
Any digital device that supports DLNA protocol
* Using DLNA connection requires downloading DLNA
streaming app from the App Store or Play Store.
b. How to Connect
Using Miracast :
The Miracast capability is called different names on difference devices.
( i.e. Samsung/Sony = Screen Mirroring, HTC = Media Output)
Please find this in device settings.
2. Celluon logo will display upon powering on, followed by a "Preparing
Wireless Connection…" screen.
3. After 20~30 seconds, "Ready to Connect" screen will display.
M/D
1. Turn on PicoAir by pressing power button for
2-3 seconds.
1
23
9
4. On a desired mobile device, find and select Screen Mirroring / Media Output.
5. Mobile device will search for nearby devices to connect.
4
6. When device discovers “Celluon PicoAir”,
tap to connect.
7. Mobile device will say “Connected” and
PicoAir will start mirroring display.
* It is recommended to disconnect any previously connected WiFi network before attempting to connect via Miracast (screen mirroring).
67
10
Table des matières
Autres manuels Celluon Projecteur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
