2
1 Safety Precautions
Meanings of the "a symbol and a signal terms"
Meanings of the "a symbol and a signal terms" indicated at the top of each precaution.
Note that even an item described in Caution may lead to a serious result depending on the case.
Be sure to observe all precautions, because every one of them describes something important.
Warnings; A precaution about the possibility that mishandling may result in death or serious injury of the user.
Cautions; A precaution about the possibility that mishandling may result in personal injury or property damage.
Warnings
1. Do not apply the torque more than permission load.
If the torque more than permission load is applied, a detector will be damaged
and it will become the accident and the cause of an injury.
2. Keep a work place always clean. The untidy place and a work stand cause the accident.
3. Situation of work place.
- Avoid use in the place where high temperature, high humidity, and direct rays hit,
and the place with much garbage and dust.
- Temperature uses it in the place of regularity (about 20 degrees).
- Make a work place bright enough.
- Do not use or charge in the place with an inflammable liquid or gas.
4. Do not bring a child close. Do not bring close to a work place except a worker.
5. Do not handle code violently. Do not move the product while holding its cord
when it is attached to the product. Do not pull the cord to unplug it.
6. Services carefully.
- In order to work with sufficient efficiency safely, the product, a bit / socket, etc. are checked periodically.
- Exchange of accessories follows the operation manual.
- Check a code periodically, and when having damaged, exchange them.
7. In the following case, turn off switch of the product, and pull out plug from power supply.
- When not using or charging.
- When fixing.
- When danger can be expected in addition to this.
8. Check whether there is not any damaged portion.
- Check whether there is not any damage before use enough
and it checks whether it operates normally or a predetermined function is demonstrated.
- Check whether there are not any abnormalities in all the parts that do influence in case of use.
- Perform parts exchange according to the operation manual.
9. Use Accessories, appointed proper bit and socket.
Do not use it except the accessories, the proper bit or the socket which are indicated by the operation manual.
10. Request repair from store.
- Do not convert.
- Repair is surely an order to the store of a purchase.
If it fixes without the knowledge of repair, or technology, sufficient performance will not be demonstrated
and it will become the accident and the cause of an injury.
11. Do not decompose or do not give a strong shock and a strong vibration.
Since this product is precision apparatus, do not decompose.
By a superfluous shock or a vibration, when a detection machine and a display part breaks down,
sufficient performance is not demonstrated and it will become the accident and the cause of an injury.
12. Charge Correctly.
- Carry out on the displayed voltage in the case of charge. Do not use a DC power supply or engine generator.
It generates heat unusually and becomes the cause of a fire.
- Perform charge in a well ventilated place. Do not cover with cloth etc. during charge.
13. It is cautious of electric shock.
The wet hand should not describe a power-supply plug. There is fear of an electric shock.
14. A battery (contained in the product) is not thrown into fire.
There is a burst or a possibility that a detrimental substance may come out.
15. The nickel-cadmium battery or the nickel-hydrogen battery is being used for the product of our company.
It is recycling resources. Leave exchange to our company.
