Ccei Tild Manuel utilisateur

Technical manual

Tild

Control & monitoring sys-

tem for pool and spa

Réf : PF10T000

Table of Contents

1. Important warnings and safety instructions .................................................................................. 1

2. Packing contents .......................................................................................................................... 2

3. Technical features ........................................................................................................................ 2

4. Wall mounting ............................................................................................................................. 3

5. Electrical wiring .......................................................................................................................... 3

5.1. Temperature probe mounting ............................................................................................ 5

5.2. Heater wiring .................................................................................................................... 5

6. Front panel description ................................................................................................................ 6

7. Connection indicator .................................................................................................................... 6

8. App connection ........................................................................................................................... 7

8.1. Bluetooth® and Wi-Fi control .......................................................................................... 7

8.2. App download .................................................................................................................. 7

8.3. First connection ................................................................................................................ 7

8.4. Vigipool app description ................................................................................................... 7

8.5. Vigipool general settings .................................................................................................. 8

8.6. Wi-Fi connection / Vigipool account creation ................................................................... 9

A. Technical support / Declaration of conformity ...................................................................... 10

1. Important warnings and safety instructions

When installing and using this electrical equipment, basic safety precautions

should always be followed, including the following:

• READ AND FOLLOW ALL INSTRUCTIONS.

• WARNING - To reduce the risk of injury, do not permit children to use this

product unless they are closely supervised at all times

• SAVE THESE INSTRUCTIONS

SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS PRODUCT

(UNIT) IS NOT INSTALLED AND USED CORRECTLY.

INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST READ

THESE WARNINGS AND ALL INSTRUCTIONS BEFORE USING THIS

PRODUCT.

This guide provides installation and operation instructions for the Tild . Consult

CCEI with any questions regarding this equipment.

CONT0044 v1.0QC (29/12/2020)

Technical manual Tild v1.0QC

Attention Installer: This guide contains important information about the installa-

tion, operation and safe use of this product. This information should be given to

the owner and/or operator of this equipment after installation.

Attention User: This manual contains important information that will help you in

operating and maintaining this product. Please retain it for future reference.

2. Packing contents

1 product Tild with:

• 1 thermal probe (P/N: SF130004)

• 1 probe holder for 1.5" pipe

• 1 probe holder for 2" pipe

• 2 screws and 2 dowels for wall mounting

• Technical manual (this document)

3. Technical features

Sizes (L x H x D) 8.5" x 8.25" x 4"

Weight 2.6 lbs - 1.2 kg

Installation Inside and outside, vertically on a wall

Power supply 12 VAC or 24VDC (depending model) 50/60 Hz

Power consumed 2.4W @12VAC

Protection Index IP 55

Filtration pump compatibility

All 110V - 240V single speed pumps

(Note: A variable speed pump can be connected,

Tild will only manage the power supply)

277 V AC / 30 VDC max - 20A max

Light compatibility

All 12 VAC CCEI lights (or 24VDC depending

of the Tild version) (Number of maximum lights

depends of the power supply)

12VAC or 24VDC (depending version) / 16A

max (divided between the 2 connectors)

Heater

All heaters equipped with a POOL or SPA selec-

tion mod via dry contact

277VAC / 30 VDC max - 10 A max

Temperature probe NTC probes

270 VAC / 30 VDC max - 10 A

Bluetooth

Low energy (V4.x)

Conform R&TTE Directive 1999/5/EC

60m range

Wi-Fi 802.11 b/g/n and "dual band" (2.4 Ghz only)

ccei.ca 2

Technical manual Tild v1.0QC

4. Wall mounting

For safety reasons and in accordance with the local directives and NEC, the case

must be installed in either:

• more than 3.5 m (11,5 ft) away (or even further if so required by the local legis-

lation) from the edge of the pool. This distance is measured taking into account

any workaround obstacles. If the case is installed behind a wall, the measured

necessary distance would be measured by the distance to go around the wall and

reach the box

• or in an underground room in close proximity to the pool. In this case, the room

must be accessible by a trap door which requires the use of a tool to be opened

Before proceeding to the mounting, verify the Wi-Fi signal presence where the product will be placed.

Using the 2 pre-mounted wall fastening lug and the provided screws, fix the Tild on a flat and stable

portion.

5. Electrical wiring

Installation of this product involves a hazard of electric shock. We strongly rec-

ommend you contract a professional installer. Incorrect installation places you in

danger and may irreversibly damaged the product and the equipment connected

to it.

Open the bottom of the case by removing the 2 screws on the bottom of the case:

ccei.ca 3

Technical manual Tild v1.0QC

When you put back the lower cover, use a torque of 1.2 Nm to tighen the screws

and ensure watertightness.

While the lower cover has been removed you will have access to the following wiring terminal blocks:

TEMP Connect the temperature probe (no polarity)

HEATER Connect the dry contact from you swimming pool heater (no polarity).

INPUT Terminal block for the 12VAC or 24VDC power supply (pay attention to the

polarity for DC input)

LIGHT1 Out put for a 12 VAC or 24VDC CCEI LED light(s). (pay attention to the po-

larity for DC input)

LIGHT2 Second out put for 12 VAC or 24VDC CCEI LED light(s) (pay attention to the

polarity for DC input)

LINE Connect the power supply of your filtration pump (110 / 240 VAC)

EARTH Connect the EARTH wire of the pump cable (if there is one)

LOAD Connect the filtration pump (110 or 240 VAC)

Tild can be supplied in 12VAC or 24VDC depending the model. To select the good

voltage you have to refer to the light that your are using and the P/N (extension /12

ccei.ca 4

Technical manual Tild v1.0QC

for 12VAC and /24 for 24VDC). If the light(s) is supplied in 12VAC, put a 12VAC

power supplied and verify the Tild P/N. If the light is supplied in 24VDC put a

24VDC power supply and verify the Tild P/N.

Passallthecableofthedevicesintothededicatedcableglandandconnectthemtothededicatedterminal

block.

Example of a full wired diagram:

When all the devices are connected, put in place the lower cover and tighten the screws at 1.2 Nm.

Tight the cable gland.

5.1. Temperature probe mounting

1. On your piping, drill a 0.7 " (18 mm) diameter hole on the high point of the pipe

2. Fit the collar supplied with the product (select the collar with the appropriate diameter)

3. On the temperature probe, put Teflon on the thread of the probe

4. Screw the probe into the upper hole of the collar

5.2. Heater wiring

Before wiring the heater, read carefully the section dedicated to remote controlling

into the heater manual. Process can be different from one heater to another.

Most heaters can use a remote connection and will be compatible with the Tild . When connecting a

heater to the Tild , the water temperature sensor must be installed into the plumbing system between

the filter pump and filter.

ccei.ca 5

Technical manual Tild v1.0QC

Usually, on the ignition board, you will be able to find a contact named "POOL" and "SPA". Using a 2

wires 22 AWG, connect the heater terminal block from the Tild to the "POOL" and "SPA" entry.

Into the Heater parameters, set "POOL" to 0°C and "SPA" to 40°C.

Depending model, other parameters must set ON or OFF, please refer to the heater manual.

6. Front panel description

On the front panel you have the possibility to put ON and OFF a device without using the app:

• If the rocker switch is on its top position (=), the device is set in automatic mode. The app will define

if the device has to be running or not.

• On the middle position (O), the device won't run. This mode can be used for device servicing.

• On the bottom position ( -), the device will run. (For security purpose, the heater can't be run when

the pump is not running)

1. Heater control

2. Light control

3. Pump control

7. Connection indicator

The indicator on the Tild unit lights in different colors depending on the controller status and may also

flash. Below is a table listing all conditions:

Flashes blue every 2 seconds The device is configured for Bluetooth® and is

waiting for a smartphone connection

Blue (not flashing) There is a smartphone connected with the device

using Bluetooth®

Flashes green every two seconds The device is configured for Wi-Fi and is con-

nect-ed to the router. It is waiting for a smartphone

connection

Green (not flashing) There is a smartphone connected to the controller

using Wi-Fi

2 green flashes per second SSID configuration in progress - Password to con-

nect to the router

ccei.ca 6

Technical manual Tild v1.0QC

Flashes green quickly Connection fault: SSID entry error or router not

accessible

In case of high brightness, the blue LED can be less visible.

8. App connection

8.1. Bluetooth® and Wi-Fi control

The Tild includes a Bluetooth and Wi-Fi transmitter, which allows your device to be controlled by a

smartphone or tablet. To be able to control the Tild , you will need an iOS (Apple®) or or Android

device with Bluetooth® Low Energy (v4.x) connectivity OR Wi-Fi 502.11 B:N:G. Other operating

systems (Windows Phone®,...) or devices equipped with previous Bluetooth® version - lower than

4.0 - are not supported. Only one phone / tablet can be connected to the panel. To connect another

device, disconnect the first device.

One phone only can be connected to the panel. To connect other advice, you should be disconnected

first.

If you are connecting via Wi-Fi, you must indicates the Wi-Fi features (ID and SSID) to connect your

Tild to the network and pilot the Tild via Wi-Fi.

Only one device (phone / tablet) can be connected to the Tild .

The Bluetooth and the geolocation of your phone must be activated.

8.2. App download

Search "Vigipool" into the App Store or Play Store search engine. Download and install the app.

8.3. First connection

When running the app for the first time, it's scanning all Tild at connection range. Select the first Tild

which appears. A message will pop-up mentioning that a pairing is needed.

Put your phone on the top right corner of the enclosure. The phone pairing takes 5 to 10 seconds.

8.4. Vigipool app description

When your Tild is connected to your device, the following screen appears:

ccei.ca 7

Technical manual Tild v1.0QC

1- Vigipool General settings Access to Vigipool settings

2- Lighting

Lighting menu, clicking on this button allow you

to put ON or OFF your lights, choose the desired

color/show to display and setup a timer.

The arrow on the right gives you access to a sec-

ond menu to manage the color intensity and to

setup a schedule.

3- Filtration

Filtration menu, clicking on this button allow you

to put ON or OFF your filtration system. (Note:

by forcing OFF the filtration, the heater will be

automatically shut down)

The arrow on the right gives you access to a sec-

ond menu to setup a schedule.

4- Heater

Heater menu, clicking on this button allow you

to put ON or OFF your filtration system. (Note:

The heater canno't be put ON if the filtration is

not running)

The arrow on the right gives you access to a sec-

ond menu to setup a schedule.

8.5. Vigipool general settings

To access the general setting menu, click on the icon " ".

ccei.ca 8

Technical manual Tild v1.0QC

5- Connected devices See all devices which are currently connected to

this Vigipool account

6- My swimming pool Enter your pool data to optimize Vigipool settings

7- My devices See all devices which can be connected to this

Vigippool account

8- Sensor & calibration Sensor calibration

9- Measurement units Choose your favourite measurement units to dis-

play (°C / °F)

10- Disconnect Disconnect your account from the app

8.6. Wi-Fi connection / Vigipool account creation

Vigipool is compatible with 2.4 Ghz networks only !

To be able to connect via Wi-Fi the first time, first leave the smartphone's Bluetooth on and activate

the phone's Wi-Fi, and check that the phone is connected to an access point. Once all is done, open the

app and connect the Tild via Bluetooth. Click on " " to access the general settings then click on "My

device" and select the device that you want to pair. Click on "Configure Wifi connection". Fill the form

with the SSID and the password of your network. If you come back to the main page, you should see

on the top right corner the mention "connected to internet".

When the Wi-Fi is correctly setup you can create a Vigipool account to manage you pool remotely.

Click on " " to access the general settings then click on "Sign in / Sign up". Fill the form to create

a Vigipool account. Once done, come back to the menu "Sign in / Sign up", fill the email address used

to create the account and your password. The product is added to the menu "My devices" and you can

now remotely control it.

ccei.ca 9

Technical manual Tild v1.0QC

A. Technical support / Declaration of conformity

USA: na.ccei-pool.com/us / Tel: +1.213.425.5280

Canada: na.ccei-pool.com/ca / Tel: +1 514.963.4226

CCEI Inc. (Québec 1170122155) declares that the product Tild is compliant with

the safety and electromagnetic compatibility requirements of European direc-

tives 2006/95/CE and 2004/108/CE and is UL listed under the number E517110.

Pierre-Yves Flattot

Montreal, on 29/12/2020

Distributor's stamp

Date of sale: . . . . . . . . . . . . . . . . . . . . . . . Batch N°: . . . . . . . . . . . . . . . . . . . . . . . . . . .

ccei.ca 10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ccei Système de contrôle

ccei

ccei tild VP Manuel utilisateur

Manuels Système de contrôle populaires d'autres marques

Pentair Pool Products

Pentair Pool Products Compool Manuel utilisateur

ComfortNET

ComfortNET CTK04 Manuel utilisateur

Fireye

Fireye InSight II 95DSS3 Manuel utilisateur

CAME

CAME G3000 Manuel utilisateur

Idemia

Idemia MorphoAccess VP MD Manuel utilisateur

Axis

Axis P1445-LE-3 Manuel utilisateur

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuel utilisateur

CNC-Step

CNC-Step High-Z T-Series Manuel utilisateur

Doosan

Doosan DVF Series Manuel utilisateur

Honeywell

Honeywell KAP 140 Manuel utilisateur

Honeywell

Honeywell vk41 series Manuel utilisateur

AirBench

AirBench FPW Guide d'installation

Cypress

Cypress HHR-3160 Manuel utilisateur

CAME

CAME GLT40AOS Manuel utilisateur

Zonex

Zonex GEN II -VVT Guide de l'utilisateur

Altronics

Altronics K 9650 Manuel utilisateur

micro-trak

micro-trak RoadMaster Manuel utilisateur

micro-trak

micro-trak Calc-An-Acre II Manuel utilisateur

ccei Tild Manuel utilisateur

Manuels Système de contrôle populaires d'autres marques