CAVE TeamUp A01 Manuel utilisateur

CAVE-TEK TeamUp A01 Camera User Guide

CAVE-TEK

TeamUp A01 Camera

User Guide

English (V1.0)

CAVE-TEK TeamUp A01 Camera User Guide 
 
Table of content 
1Packing List 1 
2Quick Start 1 
3About A01 2 
3.1 Interfaces 2 
3.2 Dimension 2 
3.3 Remote Control 3 
4GUI Settings 4 
4.1 MENU 4 
4.2 EXPOSURE 4 
4.3 COLOR 5 
4.4 IMAGE 5 
4.5 Focus 5 
4.6 NOISE REDUCTION 6 
4.7 SETUP 6 
4.8 RESTORE DEFAULT 6 

CAVE-TEK TeamUp A01 Camera User Guide

1 Packing List

Open the box, you will find below items:

Name

Quantity

TeamUp A01 Camera

USB Cable

Remote Control

Quick Installation Guide

2 Quick Start

1) Please check below connections first.

2) Connect the PC’s USB to the USB connector on the rear panel of the camera.

CAVE-TEK TeamUp A01 Camera User Guide

3 About A01

3.1 Interfaces

Item

Name

HDMI Interface

USB 3.0 Interface

3.2 Dimension

CAVE-TEK TeamUp A01 Camera User Guide

3.3 Remote Control

Key Description

1. Standby Key

Press this button to enter standby mode. Press it

again to enter normal mode.

2. Number Key

To set preset or call preset.

3. *Key

To configure the special function key.

4. Preset Key

Set preset: Store a preset position.

[SET PRESET] + Numeric button (0-9): Setting a

corresponding numeric key preset position.

5. HOME Key

Confirm the selection, or move the camera back to

the middle position

6. Return Key

Return to the previous menu

7. Zoom Key

Slow Zoom: Zoom In [+] or Zoom Out [-] slowly

Fast Zoom: Zoom In [+] or Zoom Out [-] fast

8. Left/Right Setting Key

Press with 1 button and 2 buttons setting the

direction of the Pan-Tilt.

●Simultaneously press L/R Set +1[STD]: set the

Pan-Tilt to turn the same direction as the L/R

Set.

●Simultaneously press L/R Set +2[REV]: set the

Pan-Tilt to turn the opposite direction as the

L/R Set.

9. Focus Key

To adjust the focus.

Press [AUTO] adjust the focuses on the center of

the object automatically. Or to adjust the focus

manually.

Press [MANUAL] adjusts the focus on the center of

the object manual.

10. Selection Key

Press the button corresponding to the camera you

want to operate with the remote controller.

11. #Key

To configure the special function key.

12. IR Remote Control Key

[*]+[＃]+[F1]: Address 1

[*]+[＃]+[F2]: Address 2

[*]+[＃]+[F3]: Address 3

[*]+[＃]+[F4]: Address 4

13. Reset Key

Clear preset: Erase a preset position.

[CLEAR PRESET] + Numeric button (0-9)

Or: [*]+[#]+[CLEAR PRESET]: Erase all the preset

individually.

14. PTZ Control Key

Press arrow buttons to perform panningand tilting.

Press [HOME] button to face the camera back to

front.

15. Menu Key

MENU: enter or exit OSD MENU.

16. Backlight Key

BLC ON/OFF: Press this button to enable the

backlight compensation. Press it again to disable

the backlight compensation.

17. PTZ Reset Key

Preset Pan/Tilt self-test.

18. Special Function Key

[*]+[＃]+[1]: Change OSD menu to English

[*]+[＃]+[4]: Display current IP address

[*]+[＃]+[6]: Reset to system defaults

[*]+[＃]+[8]: Display camera firmware Info.

[*]+[＃]+[9]: set mounting mode (normal / vertical

flip)

[＃]+[*]+[4]: Set Network configuration to DHCP

[*]+[＃]+[Manual]: Reset network to default.

[*]+[＃]+[F1]: Assign Camera to IR Address 1

[*]+[＃]+[F2]: Assign Camera to IR Address 2

[*]+[＃]+[F3]: Assign Camera to IR Address 3

[*]+[＃]+[F4]: Assign Camera to IR Address 4

CAVE-TEK TeamUp A01 Camera User Guide

4 GUI Settings

4.1 MENU

Press the [MENU] button to display the main menu on the display, using the arrow button to move the

cursor to the item. Press the [HOME] button to enter the corresponding sub-menu.

Exposure

Color

Image

Focus

Noise Reduction

Setup

Information

Restore Default

[Home] Enter

[Menu] Exit

4.2 EXPOSURE

Move the main menu cursor to [EXPOSURE], and press [HOME] key enter the exposure page, as shown in

the following figure.

EXPOSURE

Mode

Auto

ExpCompMode

Off

Gain Limit

Off

Backlight

DRC

Anti-Flicker

50Hz

Select Item

Change Value

[Menu] Back

Mode: Exposure mode: Auto, Manual, SAE, AAE, Bright.

ExpCompMode: Exposure the compensation mode, On, Off (Effective only in Auto mode).

Gain Limit: Maximum gain limit, 0 ~ 15 (Effective only in Auto, SAE, AAE, Bright mode).

Backlight: Set the backlight compensation, On, Off (Effective only in Auto mode).

DRC: DRC strength, 0 ~ 8.

Anti-Flicker: Anti-flicker, Off, 50Hz, 60Hz (Effective only in Auto, AAE, Bright mode).

CAVE-TEK TeamUp A01 Camera User Guide

4.3 COLOR

Move the main menu cursor to [COLOR], and press [HOME] key enter the color page, as shown in the

following figure.

COLOR

WB Mode

Auto

AWB Sens

High

Saturation

100%

Hue

Select Item

Change Value

[Menu] Back

WB-Mode: White balance mode, Auto, Indoor, Outdoor, One Push, Manual, VAR.

AWB Sens: The white balance sensitivity, Low, Middle, High.

Saturation: 60% ~ 200%.

Hue: 0 ~ 14.

4.4 IMAGE

Move the main menu cursor to [IMAGE], and press [HOME] key enter the image page, as shown in the

following figure.

IMAGE

Luminance

Contrast

Sharpness

Flip-H

Off

Flip-V

Off

B&W-Mode

Off

Gamma

0.5

Style

Clarity

LDC

Select Item

Change Value

[Menu] Back

Luminance: 0 ~ 14.

Contrast: 0 ~ 14.

Sharpness: Auto, 0 ~ 15.

Flip-H: On, Off.

Flip-V: On, Off.

B&W-Mode: On, Off.

Gamma: Default, 0.45, 0.5, 0.56, 0.63.

Style: Norm, Clarity, Bright, PC, Clarity (LED), Face.

LDC: Off, -10 ~ 10.

4.5 Focus

Move the main menu cursor to [FOCUS], and press [HOME] key enter the focus page, as shown in the

following figure.

FOCUS

AF Sense

Low

Focus Area

Middle Area

[Menu] Back

AF Sense: Low, Medium, High.

Focus Area: Bottom Half, Middle Area, Upper Half, All.

CAVE-TEK TeamUp A01 Camera User Guide

4.6 NOISE REDUCTION

Move the main menu cursor to [NOISE REDUCTION], and press [HOME] key enter the noise reduction page,

as shown in the following figure.

NOISE REDUCTION

NR2D-Level

Off

NR3D-Level

Select Item

Change Value

[Menu] Back

NR2D Level: 2D noise reduction, Off, Auto, 1 ~ 5.

NR3D Level: 3D noise reduction, Off, 1 ~ 8.

4.7 SETUP

Move the main menu cursor to [SETUP], and press [HOME] key enter the setup page, as below.

SETUP

Language

EPTZ

Zoom Limit

DVI Mode

DVI

HDMI Format

1080p30

Tracking

Off

Select Item

Change Value

[Home] Enter

[Menu] Back

Language: EN, Chinese, Russian.

EPTZ: On, Off.

Zoom Limit: 1.5x, 2x, 3x, 4x, 8x (Effective only in EPTZ item to On).

DVI Mode: DVI, HDMI.

HDMI Format: 1080P30, 1080I60, 4K@30

Tracking: On, Off.

4.8 RESTORE DEFAULT

Move the main menu cursor to [RESTORE DEFAULT], and press [HOME] key enter the restore default page,

as shown in the following figure.

RESTORE DEFAULT

Restore?

Change Value

[Home] OK

[Menu] Back

Restore: Confirm restore factory settings, optional items: Yes, No.

Note: Press [HOME] button to confirm, all parameter restore default.

Table des matières

Autres manuels CAVE Appareil photo numérique

CAVE

CAVE TeamUp TX20i Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur