Casio PV-100 Manuel utilisateur
165
This section contains technical information about the PV Unit.
Chapter
13 Technical Reference
13
Date Formats ................................................................................. 166
Time Formats ................................................................................ 166
Tool Bars ........................................................................................ 166
Data Input Tool Bar ............................................................................. 167
Data Display Tool Bar ......................................................................... 168
Keyboard Formats ........................................................................ 169
QWERTY ............................................................................................ 169
AZERTY.............................................................................................. 169
QWERTZ............................................................................................. 169
Scheduler Mode Alarms ............................................................... 170
Input Limits................................................................................... 171
Resetting the PV Unit ................................................................... 172
To reset the PV Unit ................................................................................. 172
Storage Capacity ........................................................................... 174
Auto Sort Sequence ....................................................................... 176
Message Table................................................................................ 177
Troubleshooting............................................................................. 182
Specifications ................................................................................. 186
166
Date Formats
The following describes the date formats that can be set for the system (page 159).
Time Formats
The following describes the time formats that can be set for the system (page 159).
Tool Bars
The PV Unit uses standard tool bars for data input and display. The following
shows typical examples of these toolbars, and describes the items that can appear
in each.
Format
M/D/Y
D/M/Y
Y/M/D
Description
Month/Day/Year. Example: Jan/31/1999
Day/Month/Year. Example: 31/Jan/1999
Year/Month/Day. Example: 1999/1/31
Format
12-hour
24-hour
Description
Represents time in two blocks, from midnight to 11:59am,
and from noon to 11:59pm.
Represents time as a single block, from 0:00 to 23:59. This
format is often referred to as “military time.”
167
Chapter 13 Technical Reference
Data Input Tool Bar
• The above table shows all the buttons that can possibly appear in a data
input tool bar. Depending on mode and other factors, some of the tools
shown above may not be included in a data input tool bar.
Mode icon
Button
Mode icon
Description
Indicates the mode you are currently in. Tapping the mode
icon displays the pop up tool screen.
Clears all characters in the entry (field) where the cursor
is located. In the Contacts Mode, pressing this button clears
the data from all the input fields for the data item (record)
you are inputting.
Pastes the current date and time as being kept by the main
clock at the current cursor location.
Displays a calculator.
Advances to the next screen.
Returns to the previous screen.
Saves input data and closes the input screen.
In the Quick-Memo Mode, tapping this button changes to
the list view.
168
Data Display Tool Bar
• The above table shows all the buttons that can possibly appear in a data
display tool bar. Depending on mode and other factors, some of the
tools shown above may not be included in a data display tool bar.
Mode icon
Button
Mode icon
Description
Indicates the mode you are currently in. Tapping the mode
icon displays the pop up tool screen.
Displays a menu of other views that can be used to display
data.
In the Scheduler and Expense Manager modes, jumps to
today’s date as kept by the PV Unit’s built-in clock.
Advances to the next item.
Returns to the previous item.
Displays the new data input screen.
Returns to the list screen from a Contacts, Memo,
Expense Manager, and Quick-Memo mode data screen.
Changes to the data editing screen for the current data
item.
169
Chapter 13 Technical Reference
Keyboard Formats
The PV Unit provides you with a selection of keyboard formats.
QWERTY
• This format is automatically selected when English, Spanish, or Italian
is set as the system language.
AZERTY
• This format is automatically selected when French is set as the system
language.
QWERTZ
• This format is automatically selected when German is set as the system
language.
170
Scheduler Mode Alarms
• When you set an alarm time for a Schedule, To Do, or Reminder item,
an alarm sounds for about 20 seconds when the alarm time is reached on
the date that is also specified for the data item.
• Alarms may fail to sound when battery power is low.
• If the alarm time is reached for a data item stored in the secret memory
area, the message Check the secret memory area! appears on the
display. In this case you must enter the secret memory area to see what
the alarm is for.
• Alarms are deleted automatically after the Scheduler alarm time is passed.
You cannot set an alarm time for a date and time that are already passed.
• You cannot schedule two alarms for the same time on the same day.
• Up to 100 Scheduler alarm times can be set at one time.
171
Chapter 13 Technical Reference
Input Limits
The following table shows the maximum number of characters that can be input
into various fields.
Mode
Schedule
To Do
Reminder
Contacts
Memo
Expense
Manager
Search
Password
Clipboard
Maximum Number of Characters
2,046
2,046
14
2,046
2,036
14
12
2,048
8
14
14
2,008
12
12
2,048
Entry (Field)
Description
Description
Category
Description
–
Category
Item
Description
Amount
Payment Type
Expense Type
Description
–
–
–
172
Resetting the PV Unit
Warning!
The following procedure erases all data stored in the memory of the PV Unit.
Perform this operation only when you want to delete all data and initialize the
settings of the PV Unit.
Remember - you should always keep copies of important data by writing it down,
or by transferring it to a personal computer.
To reset the PV Unit
1. Open the cover and touch the screen with the stylus to turn on power.
2. Use the stylus to press the RESET button on the back of the PV Unit.
RESET
RESET button
173
Chapter 13 Technical Reference
• If the above does not appear on the display when you press the RESET
button, slide the battery switch to the REPLACE BATTERIES position
and remove the battery compartment cover. Use the stylus to press the P
button and then replace the battery compartment cover. Slide the battery
switch back to the NORMAL OPERATION position and then press the
RESET button.
3. Tap the center of each of the four cross marks as they appear on the
screen.
• The contrast adjustment screen appears next.
4. Tap Hor Jto adjust the contrast of the display, and then tap OK.
5. In response to the message that appears, tap Yes to reset the PV Unit and
clear all memory contents, or No to abort the reset procedure without
doing anything.
6. If you tapped Yes in the above step, a second confirmation message
appears. Tap Yes to reset the PV Unit and clear all memory contents, or
No to abort the reset procedure without doing anything.
• Tapping Yes in the above step starts the actual reset procedure.
7. After the reset procedure is complete, tap the button next to the language
you want to select as the system language.
8. Tap Set to change to the pop up tool screen.
174
9. Check the time setting and correct it if necessary (page 156).
• Following are the initial settings of the PV Unit after you perform the
RESET operation.
Main clock: Clock 1
London
Jan/1/1999
12:00 am
12-hour format
Clock 2: New York
Daily Alarm: 12:00 pm
Sound: Daily Alarm off, all others on
Character input: CAPS off
Storage Capacity
The 2-Mbyte memory capacity of the PV-200 (1-Mbyte for the PV-100) includes
a 1,499,136-byte user area (687,104 bytes for the PV-100). The following shows
examples of what this means for the storage of data in each mode.
Scheduler
Approximately 24,400 items (10,736 for the PV-100) with 20-character description
Approximately 12,200 items (5,368 for the PV-100) with 60-character description
Autres manuels pour PV-100
15
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Casio PDA
Casio
Casio SF-R10 Manuel utilisateur
Casio
Casio PV-750 Plus Manuel d'utilisation et d'entretien
Casio
Casio IT-G400 Series Manuel utilisateur
Casio
Casio PV-S250 Manuel utilisateur
Casio
Casio IT-10 - Cassiopeia M20 - Win Mobile Manuel utilisateur
Casio
Casio FIVA MPC-501 Series Manuel utilisateur
Casio
Casio PV-100 Manuel utilisateur
Casio
Casio Cassiopeia Pocket PC Manuel utilisateur
Casio
Casio Cassiopeia IT-700 Manuel utilisateur
Casio
Casio PV-100 Manuel utilisateur
Casio
Casio PV-750 Plus Manuel d'instructions et de sécurité
Casio
Casio PV-S250 Manuel utilisateur
Casio
Casio PV-750 Plus Manuel d'instructions et de sécurité
Casio
Casio PV-S250 Manuel utilisateur
Casio
Casio PV-100 Manuel utilisateur
Casio
Casio BN-10 Manuel utilisateur
Casio
Casio PV-750 Plus Manuel d'instructions et de sécurité
Casio
Casio DX-500BR Guide de dépannage
Casio
Casio DT-X30 R-50C Manuel utilisateur
Casio
Casio PV-S250 Manuel utilisateur
