Carrier TSTAT Manuel d'utilisation

Product

Data

TSTAT

Thermostats

Thermidistat

Control

The Carrier electronic thermostat

product line consists of programmable

and non-programmable air conditioner,

heat pump, and 2-speed models; a

programmable dual fuel model; and a

programmable/non-programmable

Thermidistat

Control. Carrier also

offers builder’s thermostats in both air

conditioner and heat pump models.

These units feature non-mercury based

electronic controls built into a subtle,

slim plastic enclosure. They require no

battery back-up and the programmable/

non-programmable models are not

power stealing.

FEATURES/BENEFITS

BUILDER’STHERMOSTATS

Product Offering

—

Non-programmable air conditioner

and heat pump models available.

Easy to Use

— Rubber push buttons

provide easy changes to heating/

coolingmodeoperation,fan operation,

and desired temperature setting.

Manual Changeover

— Allows

manual switches in system operation

when both heating and cooling are

needed on the same day.

NON-PROGRAMMABLE

THERMOSTATS

Clean Design

— Features soft,

responsive buttons and an easy-to-read

backlit Liquid Crystal Display (LCD).

Accurate, Reliable Temperature

Control

— LCD shows current room

temperature at all times, and desired

temperature prompts upon demand.

Auto Changeover

— Switches

system operation automatically when

bothheatingand coolingareneeded on

the same day.

Outdoor Temperature Display

—

Allows a check of the temperature

outside before leaving home.

(Optional on all models except non-

programmable air conditioner.)

CleanFilterIndicator

—Tellswhen

it is time to clean the system’s ﬁlter.

Perfect Complement

— Completes

your Carrier total comfort system

needs.

BUILDER’STHERMOSTAT

* Standard Model (AC, HP)

NON-PROGRAMMABLETHERMOSTAT

* Standard Model (AC, HP, 2S)

PROGRAMMABLETHERMOSTAT

ANDTHERMIDISTAT

CONTROL

* Standard Model (AC, HP, 2S)

* Dual Fuel Model (DF)

* Thermidistat Control Model (RH)

Limited Warranty

— Standard

1-year warranty available on all parts.

PROGRAMMABLE

THERMOSTATS

Carrier programmable thermostats

possess the same features as non-

programmable thermostats plus:

Comfort and Energy Savings

—

Seven day programming, with

4 temperature changes provided per

day, means comfort when the family is

at home and savings through reduced

energy usage when the family is away

or asleep.

Easy to Use

— Simple instructions

are located inside the thermostat’s

door.

Duplicate Programming

— Copy

the comfort schedule from one day to

the next using the copy previous day

function.

Override Capability

— Hold

function allows the regular schedule to

be bypassed with a temporary setting.

Battery-Free

— Non-volatile RAM

chip requires no battery backup.

Program is retained in memory so

reprogramming is not required after

power loss.

Timeguard

— Equipment

protection.

Dual Fuel Model

— The dual fuel

thermostat can be used to control a gas

furnace and a heat pump. This

thermostat eliminates the need for an

interface control kit.

THERMIDISTAT

CONTROL

Carrier’sThermidistatControl can be

used to control any equipment

application except zoning. It possesses

allthe featuresand beneﬁtsofCarrier’s

non-programmableandprogrammable

thermostats plus:

Enhanced Comfort

— Allows the

homeowner to accurately maintain the

desired temperature and humidity

settingsinthe home. By combining the

functions of a programmable

thermostat and a humidistat, the

Thermidistat Control provides

temperature control, humidity control,

and dehumidiﬁcation.

Humidity Control

— The

ThermidistatControl accuratelycontrols

humidity level. It humidiﬁes during

heatinganddehumidiﬁesduring cooling.

Automatic HumidityAdjustment

— When used with the outdoor

temperature sensor, the Thermidistat

Control automatically adjusts the

humidity setting, reducing excess

condensation on the windows.

Vacation mode

—Withasingletouch

of a button, vacation mode adjusts all

comfort levels for optimum efﬁciency

while the home is unoccupied — or

restores the settings to normal upon

return.

Smart Recovery

— Provides

consistent heating and cooling right on

time as it gradually adjusts indoor

temperatures before a scheduled change.

Non-Programmable Option

—

Offers the same popular humidity

control beneﬁts to consumers who do

not need the added beneﬁts of

programming. Nine functional buttons,

along with the UP and DOWN buttons,

make it easy to enter the temperature

and humidity set points.The LCD is the

largest display on the market for a non-

programmable thermostat.

Model number nomenclature

ELECTRONIC THERMOSTATS

T STAT

THERMOSTAT

QUANTITY

AC – AIR CONDITIONING

HP – HEAT PUMP

2S – TWO SPEED/TWO STAGE

DF – DUAL FUEL

RH – RELATIVE HUMIDITY (THERMIDISTAT CONTROL)

–A

SERIES

P – PROGRAMMABLE

N – NON-PROGRAMMABLE

CC – CARRIER BRAND

B – BUILDER'S

A98298

As an ENERGY STAR

Partner,

Carrier Corporation has determined

that the programmable thermostats

and programmable Thermidistat

Control meet the ENERGY STAR

guidelines for energy efﬁciency.

Dimensions

Non-Programmable Thermostat

Builder's Thermostat

Programmable Thermostat and Thermidistat Control

5 13⁄16″

3 1⁄2″

4 3⁄8″

7 3⁄8″

1 3⁄8″

4 1⁄4″

3⁄4″

1 3⁄8″

2 3⁄4″

A98297

Product data information

Physical Characteristics

Builder’s Models:

Dimensions: See drawing

Appearance: Plastic, designer white, white rubber push buttons

Non-Programmable/Programmable Models:

Dimensions: See drawing

Appearance: Plastic, eggshell color, textured

Electrical Characteristics

Builder’s Models:

Input Volts/Amps: 24vac, 1 VA

Non-Programmable/Programmable Models:

Input Volts/Amps: 24vac, 5 VA

Environmental Requirements:

Operating Temperature/Relative Humidity: 32°F (0°C) to 104°F (40°C)/95% rh non-condensing

Storage Temperature/Relative Humidity: –40°F (–40°C) to 134°F (56°C)/95% rh non-condensing

Program Speciﬁcations:

Builder’s Models:

Temperature set point range: 50°F (10°C) to 90°F (32°C)

Manual changeover

Non-volatile memory

Fahrenheit or Celsius selectable

Power-stealing option onAC model

Selectable fan ON or OFF with auxiliary heating (HP model)

Five-minute compressor timeguard

Four cycles per hour maximum

Auxiliary heat LED on heat pump models

Non-Programmable Models:

Temperature setpoint range: 40°F (4°C) to 90°F (32°C)

Separate heat and cool setpoints

Auto changeover

Clean ﬁlter reminder: installer adjustable

Permanent memory

Programmable Models:

Temperature setpoint range: 40°F (4°C) to 90°F (32°C)

Separate heat and cool setpoints

Auto changeover

Clean ﬁlter reminder: installer adjustable

Permanent memory

Programming days: 7 day

Programming periods: 4—Wake, Day, Eve, Sleep

Hold function

Copy previous day function

Humidity display and control (Thermidistat Control only)

Wiring Requirements:

Power: 24vac nominal, 18- to 30-vac, 50/60 Hz

Wiring: Standard 18 to 22 gage.

Description

PROGRAMMABLE ELECTRONIC THERMOSTATS

NON-PROGRAMMABLE ELECTRONIC THERMOSTATS

BUILDER’S MODELS

* Do not use in zoning heat pump applications.

Thermostat accessories

* Outdoor temperature sensor is an accessory for all Carrier electronic thermostats, except the non-programmable air conditioner version and

builder’s thermostats.It allows the temperature at a remote location (outdoors) to be displayed on the thermostat.

The outdoor temperature sensor

must be

used with the dual fuel thermostat.

The outdoor temperature sensor is included with the Thermidistat Control.

† Thermostat backplate can be used for programmable and non-programmable electronic thermostats only.This plate is designed to cover surround-

ing wall area located behind thermostat.

‡ Thermostat conversion kit is a 24-vac accessory that can turn a 4-wire thermostat application into a 5-wire application.This kit can also be used

to replace a broken thermostat wire, or add an extra wire when needed.

PART NO. DESCRIPTION

TSTATCCPAC01-A

Thermostat, Auto Changeover, 7-Day Programmable, °F/°C, 1-Stage Heat/1-Stage Cool

TSTATCCPHP01-A

Thermostat, Auto Changeover, 7-Day Programmable, °F/°C, 2-Stage Heat/1-Stage Cool

TSTATCCP2S01-A

Thermostat, Auto Changeover, 7-Day Programmable, °F/°C, 2-Stage Heat/2-Stage Cool

in AC Mode, 3-Stage Heat/2-Stage Cool in HP Mode

TSTATCCPDF01-A*

Dual Fuel Thermostat, Must Be Used with OutdoorTemperature Sensor TSTATXXSEN01

(For use in all AC, HP, and 2S applications)

TSTATCCPRH01-B

Thermidistat Control — Non-Programmable/ProgrammableThermostat with Humidity Control

(For use in all Dual Fuel, AC, HP, and 2S applications. Includes Outdoor Air Temperature Sensor.)

PART NO. DESCRIPTION

TSTATCCNAC01-A

Thermostat, Auto Changeover, Non-Programmable, °F/°C, 1-Stage Heat/1-Stage Cool

TSTATCCNHP01-A

Thermostat, Auto Changeover, Non-Programmable, °F/°C, 2-Stage Heat/1-Stage Cool

TSTATCCN2S01-A

Thermostat, Auto Changeover, Non-Programmable, °F/°C, 2-Stage Heat/2-Stage Cool

in AC Mode, 3-Stage Heat/2-Stage Cool in HP Mode

PART NO. DESCRIPTION

TSTATCCBAC01

Thermostat, Air Conditioner, Non-Programmable, 1-Stage Heat/1-Stage Cool, Manual Changeover, °F/°C

TSTATCCBHP01*

Thermostat, Heat Pump, Non-Programmable, 2-Stage Heat/1-Stage Cool, Manual Changeover, °F/°C

PART NO. DESCRIPTION

TSTATXXSEN01*

Outdoor Air Temperature Sensor

TSTATXXNBP01†

Backplate for Non-Programmable Thermostat

TSTATXXPBP01†

Backplate for Programmable Thermostat andThermidistat Control

TSTATXXCNV10‡

Thermostat Conversion Kit (4 to 5Wire) — 10 Pack

Thermostat andThermidistat Control application

NON-PROGRAMMABLE THERMOSTAT USAGE

* Model HP thermostat must be ﬁeld converted to air conditioner operation.

† Must use Programmable Dual FuelThermostat or Thermidistat Control in this application.

‡ Dual Fuel operation controlled by heat pump when using Model 2SThermostat.

Non-Programmable Models

The TSTATCCNAC01-A Thermostat provides single-stage, non-programmable heat/cool temperature control for 24-vac

heating-cooling systems with auto changeover. Temperature display can be selected to read °F or °C.

The TSTATCCNHP01-A Thermostat provides versatile 2-stage heating and single-stage cooling, non-programmable

temperature control for 24-vac heating-cooling systems with auto changeover. Temperature display can be selected to read °F

or °C. Thermostat comes factory set to operate as a heat pump model with second-stage controlling auxiliary electric heat.

This model can easily be converted from heat pump operation to air conditioning operation requiring 2 stages of gas or electric

heat.

The TSTATCCN2S01-A Thermostat provides versatile multiple stage, non-programmable heat/cool temperature control for

24-vac heating-cooling systems with auto changeover. Temperature display can be selected to read °F or °C. Thermostat is

designed for 2-speed compressor bearing units. Thermostat comes factory set to operate as a heat pump model with 2-stage

cooling and 3 stages of heat, third-stage controlling auxiliary electric heat.This model can easily be converted from heat pump

operation to air conditioning operation requiring 2 stages of cooling and 2 stages of heating.

PROGRAMMABLE THERMOSTAT USAGE

* Model HP thermostat must be ﬁeld converted to AC operation.

† For use with special 3-stage electric heat setup.

‡ Dual Fuel operation controlled by heat pump when using Model 2SThermostat.

Programmable Models

The TSTATCCPAC01-A Thermostat provides single-stage, 7-day programmable heat/cool temperature control for 24-vac

heating-cooling systems with auto changeover. Temperature display can be selected to read °F or °C.

The TSTATCCPHP01-A Thermostat provides versatile 2-stage heating and single-stage cooling, 7-day programmable

temperature control for 24-vac heating-cooling systems with auto changeover. Temperature display can be selected to read °F

or °C. Thermostat comes factory set to operate as a heat pump model with second-stage controlling auxiliary electric heat.

This model can easily be converted from heat pump operation to air conditioning operation requiring 2 stages of gas or electric

heat.

The TSTATCCP2S01-A Thermostat provides versatile multiple stage, 7-day programmable heat/cool temperature control for

24-vac heating-cooling systems with auto changeover. Temperature display can be selected to read °F or °C. Thermostat is

designed primarily for 2-speed compressor bearing units. Thermostat comes factory set to operate as a heat pump model with

2-stage cooling and 3-stages of heat, third-stage controlling auxiliary electric heat.This model can also perform smart-staging

with FK fan coils (special heaters and setup required) using a single-speed heat pump with 3-stages auxiliary electric heat. In

addition, this model can easily be converted from heat pump operation to air conditioning operation requiring 2 stages of

cooling and 2 stages of heating (e.g. gas or electric heat).

INDOOR UNIT

OUTDOOR UNIT

Air Conditioner Heat Pump

1 Speed 2 Speed 1 Speed 2 Speed

1-Stage Furnace

Model AC or HP* Model 2S † Model 2S‡

2-Stage Furnace

Model AC or HP* Model 2S † Model 2S‡

Typical Fan Coil

Model AC or HP* Model 2S Model HP Model 2S

FK Series Fan Coil

Model AC or HP* Model 2S Model HP Model 2S

INDOOR UNIT

OUTDOOR UNIT

Air Conditioner Heat Pump

1 Speed 2 Speed 1 Speed 2 Speed

1-Stage Furnace

Model AC or HP* Model 2S Model DF Model DF or 2S‡

2-Stage Furnace

Model AC or HP* Model 2S Model DF Model DF or 2S‡

Typical Fan Coil

Model AC or HP* Model 2S Model HP Model 2S

FK Series Fan Coil

Model AC or HP* Model 2S Model HP or 2S† Model 2S

Programmable Dual Fuel Model

The TSTATCCPDF01-A Thermostat provides single-stage or multiple-stage dual fuel operation, 7-day programmable heat/

cool temperature control for 24-vac systems with auto changeover. Temperature display can be selected to read °F or °C. The

Dual Fuel Thermostat is designed with an adjustable balance point for heat pumps when using a gas furnace for backup or

auxiliary heat. Thermostat comes factory set to operate single-speed equipment, but is easily conﬁgured to match multiple

stage equipment combinations.This model requires use of the OutdoorAir Temperature Sensor accessory. Using the dual fuel

thermostat eliminates the need for an interface control.

THERMIDISTAT CONTROL USAGE

* The Thermidistat Control may be used in all applications but must be ﬁeld conﬁgured for speciﬁc application.

Thermidistat Control

The TSTATCCPRH01-B Thermidistat Control provides single-stage or multiple-stage equipment operation, 7-day

programmable heat/cool temperature control for 24-vac systems with auto changeover. It controls both humidiﬁcation and

dehumidiﬁcation and can be used to control heat pumps, air conditioners, or dual fuel applications. Temperature display can

be selected to read °F or °C. The Thermidistat Control is designed primarily as an extension of the programmable thermostat

line to provide humidify and dehumidify outputs in controlling humidity. It can also be ﬁeld conﬁgured to be non-

programmable. Humidify outputs connect directly to 24-v humidiﬁers. Dehumidify outputs connect directly to variable-speed

furnaces or fan coils that have dehumidiﬁcation capabilities. To achieve full beneﬁts, this model requires use of the Outdoor

Air Temperature Sensor accessory, which is included with the Thermidistat Control.

The Thermidistat Control comes packaged with the 40FKA for Comfort Heat.

INDOOR UNIT

OUTDOOR UNIT

Air Conditioner Heat Pump

1 Speed 2 Speed 1 Speed 2 Speed

1-Stage Furnace

Model RH*

2-Stage Furnace

Typical Fan Coil

FK Series Fan Coil

•

Indianapolis, IN 46231 5-98

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Book 1 4 Page 8 Catalog No. 02TS-TA1 Printed in U.S.A. PC 101 Form TSTAT-2PD

Tab misc misc Replaces: TSTAT-1PD

Operational information

Five-minute compressor timeguard

This timer prevents the compressor from starting unless it has been off for at least 5 minutes. It can be defeated for 1 cycle by

simultaneously pressing the FAN mode button and INCREASE TEMPERATURE (UP) button.

Fifteen-minute cycle timer

This timer prevents the start of a heating or cooling cycle until at least 15 minutes after the last start of the same cycle. Its

function is to assure that equipment is not cycled more than 4 times per hr. This timer is defeated for 1 cycle when the desired

temperature is manually changed. It can also be defeated for 1 cycle by simultaneously pressing the FAN mode button and

INCREASE TEMPERATURE button.

Fifteen-minute staging timer

In multistage heating or cooling, this timer prevents any higher stage from turning on until preceding stage has been on for 15

minutes. This timer is defeated if temperature error is greater than 5°F (usually due to a large change in desired temperature).

Minimum on time

In normal operation, when a stage turns on, it will not turn off for a minimum of 2 minutes (3 minutes onThermidistat Control

model).

Heat/Cool setpoints (desired temperature)

A minimum difference of 3° is enforced between heating and cooling desired temperatures.This is done by allowing 1 setting

to “push” the other, to maintain this difference. (Thermidistat Control 2° and adjustable.) Builder’s thermostats are controlled

by a single set point.

Equipment on indicators (Thermidistat Control)

When cooling equipment is ON, a COOL icon preceded by a small triangle is displayed below the cool setpoint.While cooling

equipment turn on is delayed by a staging or cycle timer, the triangle will ﬂash. The same is true for the HEAT icon and its

preceding triangle located under the heat setpoint. These 2 triangles are also used to indicate the state of the humidify and

dehumidify outputs. See next section.

Humidify/dehumidify output on indicators (Thermidistat Control)

Within humidity select screen (selected by Humidity button and indicated by “hu” or “dhu” on clock display), the triangle

under humidity setpoint will be on while humidify output is on. The triangle under dehumidify setpoint will be on while

dehumidify output is active (turned off, because this output is reverse logic).

Auto changeover

When auto changeover mode is selected, a change from heat to cool (or vice versa) will not occur until an opposite mode

demand has existed for 20 minutes. If setpoint is changed, the 20 minute requirement is deleted. Builder’s thermostats are

manual changeover.

Emergency heat mode

When thermostat is controlling a heat pump and emergency heat is selected, allY signals are locked out, and W becomes

energized upon a call for heat.

Smart Recovery (Programmable models)

With Smart Recovery selected, transition out of setback begins a ﬁxed time period before selected recovery time and gradually

adjusts room temperature so that the desired temperature will be achieved at selected recovery time.

Autres manuels pour TSTAT

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Carrier Thermostat

Carrier

Carrier Programmable Dual Fuel Thermostats Instructions et recettes

Carrier

Carrier AQUAZONE 50QE900-250FS Manuel utilisateur

Carrier

Carrier 33AW-CS1 Manuel utilisateur

Carrier

Carrier Performance TP-NHP Manuel utilisateur

Carrier

Carrier PERFORMANCETSERIES EDGER THERMIDISTATT CONTROL... Manuel utilisateur

Carrier

Carrier TSTAT CC PS701 Manuel utilisateur

Carrier

Carrier PTACSTAT-NP-HP Instructions d'installation

Carrier

Carrier Comfort Non-Programmable Manuel utilisateur

Carrier

Carrier 33CS450-01 Manuel utilisateur

Carrier

Carrier 53DFST2-NP Manuel utilisateur

Carrier

Carrier P/N 33CSSN2-MH Manuel utilisateur

Carrier

Carrier Programmable Dual Fuel Thermostats Instructions et recettes

Carrier

Carrier TSTATCCPSE01 Mode d’emploi

Carrier

Carrier 33CS420-01 Manuel utilisateur

Carrier

Carrier Debonair 33CS220-FS Manuel utilisateur

Carrier

Carrier A07049 Manuel utilisateur

Carrier

Carrier AQUAZONE 50QE900 Manuel utilisateur

Carrier

Carrier TSTATCCNTT01-B Manuel utilisateur

Carrier

Carrier CRC2 - NTC Manuel utilisateur

Carrier

Carrier 53DFS250-HW Manuel utilisateur

Carrier

Carrier Debonair 33CS250-RC Manuel utilisateur

Carrier

Carrier Debonair 2 Manuel utilisateur

Carrier

Carrier AC Instructions et recettes

Carrier

Carrier Infinity Control Home Instructions de montage

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur

Honeywell

Honeywell T6811 Manuel utilisateur