Carrier Performance TP-PAC Manuel d'utilisation
T P --- PA C , T P --- P H P, T P --- P R H
T P --- N A C , T P --- N H P, T P --- N R H
PerformancetSeries EdgetThermostat
Product Data
A07049
Fig. 1 -- Performance Series Programmable Thermostat
A07048
Fig. 2 -- Performance Series Non--programmable Thermostat
US patents: US7287709 B2, US20080147242 A1, USD582800 SI, US20060165149 A1,
US6956463 B2.
Designed and Assembled
in the USA.
The Carrier PerformancetSeries Edgetthermostats consists of
programmable and non--programmable air conditioner, heat pump
and Thermidistattcontrols. These units feature non--mercury,
non--lead based electronic controls built into a subtle, slim plastic
enclosure.
FEATURES/BENEFITS
Edge Programmable & Non--Programmable
SOutdoor Air Temperature (OAT) sensor option
SAuto changeover available
SBattery free
SNon--volatile memory to retain settings during a power outage
SKeypad lockout
SEnglish/Metric units selection
SFilter/UV light/Humidifier pad replacement indicators
SContinuous display back--lighting configurable
SHybrid Heat compatible
SRC/RH power compatible
S2--wire communicating installation option
Edge Programmable models
SExPtexpansion port* for use with future enhancements and/ or
features
SProgrammable with personal computer**
S7, 5--2, All Days programmable
S4 or 2 periods per day programmability
SProgrammable fan by period
SVacation mode controls temperature and humidity
SRemote room sensor option
SAdjusts automatically for Daylight Savings Time
Edge Non--Programmable models
S t programmability
Air Conditioner Control
S1--stage heat / 1--stage cool
Heat Pump Control
S3--stage heat / 2--stage cool
Thermidistat Control
SHeat pump 2--stage or Hybrid Heat 3--stage heat / 2--stage
cooling with humidity control
SHumidity display
SHumidify output for direct control of humidifier
SDehumidify output for variable--speed blowers
SHybrid Heat compatible
* ExP accessory (expansion port and memory card) sold separately
** Requires ExP accessory
2
MODEL NUMBER NOMENCLATURE
12345678
TP -- PAC01
Product Packaged Quantity
T = Thermostat 01 = 1 piece
Series Equipment Type
P = Performance AC = Air conditioning
HP = Heat pump
Not Defined RH = Relative humidity
-- = Place Holder
Function Type
P = Programmable
N = Non--programmable
DIMENSIONS
.9 in.
22.86 mm
1.3 in.
33.02 mm
Single
Piece
Two
Piece
5.2 in.
132.08 mm
5.2 in
132.08 mm
A07137
Fig. 3 -- Performance Series Programmable Thermostat
5.2 in.
132.08 mm
5.2 in
132.08 mm
.9 in.
22.86 mm
1.3 in.
33.02 mm
Single
Piece
Two
Piece
A07138
Fig. 4 -- Performance Series Non--programmable Thermostat
PRODUCT DATA INFORMATION
Physical Characteristics
Dimensions: See drawing
Mounting: Vertical or horizontal J--box provisions
Electrical
Input volts/amps: 24VAC, 3 VA, RC/RH compatible
Environment
Operating temperature/Relative humidity: 32_F(0_C) to
104_F(40_C), 95% RH non--condensing
Storage temperature/Relative humidity: --40_F(--40_C) to
134_F(57_C), 95% RH non--condensing
Wiring Requirements
Standard 18 to 22 gauge, local wiring codes supersede
Accessories
PART NUMBER DESCRIPTION
TSTATXXSEN01---B* Outdoor air temperature sensor
T P --- E X P ExP Expansion Memory Port
T X --- L B P 0 1 LargedecorativebackplateforTP---Pxx
a n d T P --- N x x
ZONECC0RRS01 Remote room temperature sensor
* The outdoor air temperature sensor must be used with the Thermidistat
control in a Hybrid Heat system.
TP -- PAC / -- PHP / -- PRH / -- NAC / -- NHP / -- NRH
3
OPERATIONAL INFORMATION
Heating/Cooling Setpoints
The heating/cooling setpoint range is from 50_F(10_C) to 90_F
(32_C). A selectable range of 1--6_is enforced between heating
and cooling desired temperatures. This is done by allowing one
setting to “push” the other, to maintain this difference. (This
difference is adjustable in Installer settings.)
Humidify/Dehumidify Setpoint Range
The humidify setpoint range is from 10% to 46% RH in 2% RH
increments. The dehumidify setpoint range is from 46% to 66%
RH in 2% RH increments.
Five--minute Compressor Time Guard
This timer prevents the compressor from starting unless it has been
off for at least 5 minutes. It can be defeated for 1 cycle by
simultaneously pressing the FAN button and INCREASE
TEMPERATURE (UP) button.
Equipment on indicators
When cooling equipment is ON, a COOL ON icon is displayed.
When heating equipment is ON, a HEAT ON icon is displayed.
When auxiliary heating is ON (HP only), an AUX HEAT icon is
displayed.
Humidify/Dehumidify Output On Indicators
(Thermidistat Control)
When the operating mode is heat and the HUM output is energized
the “humidify” icon shall be displayed. When the operating mode
is cool, the dry contact is configured as a DEHUM output and there
is a dehumidify demand or the cooling equipment is energized to
satisfy a dehumidify demand, the “dehumidify” icon shall be
displayed.
Auto Changeover
When Auto Changeover mode is selected, a change from heat to
cool (or vice versa) will not occur until an opposite mode demand
has existed for 20 minutes. When a setpoint is changed, Auto
Changeover timing is ignored to allow the heating/cooling
equipment to respond quickly. Auto Changeover mode can be
disabled.
Emergency Heat Mode
When the thermostat is controlling a heat pump and emergency
heat is selected, all Y signals are locked out, and W becomes
energized upon a call for heat.
Smart Recovery (Programmable models)
With Smart Recovery selected, transition out of setback begins a
fixed time period (Off, 30, 60, or 90 minutes selectable) before
selected recovery time and gradually adjusts room temperature so
that the desired temperature will be achieved at selected recovery
time.
Room Temperature Offset
Room temperature may be deliberately offset by up to 5_in either
direction.
Programmable Fan (Programmable models)
This selection allows the homeowner to program the fan selection
to “Auto” or “Fan On” for each of the program schedule periods.
TP -- PAC / -- PHP / -- PRH / -- NAC / -- NHP / -- NRH
4
Copyright 2009 Carrier Corp. S7310 W. Morris St. SIndianapolis, IN 46231 Printed in U.S.A. Edition Date: 09/09
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
C a t a l o g N o : T P --- P A C --- 3 P D
R e p l a c e s: T P --- PA C --- 2 P D
TP -- PAC / -- PHP / -- PRH / -- NAC / -- NHP / -- NRH
Ce manuel convient aux modèles suivants
12
Table des matières
Autres manuels Carrier Thermostat
Carrier
Carrier ComfortVu Plus TBPL-H Mode d'emploi
Carrier
Carrier 53DFS250-HW Manuel utilisateur
Carrier
Carrier Comfort series Manuel utilisateur
Carrier
Carrier edge TP-NHP01-A Manuel utilisateur
Carrier
Carrier Aquazone 50QE900 Manuel utilisateur
Carrier
Carrier Cor Manuel utilisateur
Carrier
Carrier TSTATCCPS101 Manuel utilisateur
Carrier
Carrier O3TS-TA32 Guide Instructions de montage
Carrier
Carrier TSTATCCPF701 Mode d’emploi
Carrier
Carrier NSA-A/CP-I-2.5-4X Manuel du propriétaire
Carrier
Carrier AC Instructions et recettes
Carrier
Carrier Programmable Thermostats Instructions et recettes
Carrier
Carrier Infinity Control Home Manuel utilisateur
Carrier
Carrier 33CS Instructions et recettes
Carrier
Carrier 33CS Instructions et recettes
Carrier
Carrier TC -PAC Manuel utilisateur
Carrier
Carrier TSTAT Manuel d'utilisation
Carrier
Carrier 5+2 DAY PROGRAMMABLEDIGITAL THERMOSTAT Manuel utilisateur
Carrier
Carrier Infinity SYSTXCCITC01-C Manuel utilisateur
Carrier
Carrier TP-WEM01 Guide de configuration
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
