Cargo 160775 Manuel utilisateur
GB
1
Automotive components since 1963
GB
160775
SUPER 7" 4+1
REAR VIEW CAMERA
AND MULTIMEDIA KIT
USER MANUAL
Vedpak 98UK_Version 5_010909
2Vedpak 98UK_Version 5_010909
160775
GB
3
2 3 Vedpak 98UK_Version 5_010909
160775
GB
CONTENT:
Features .............................................................................................. 4
Installation of monitor.......................................................................... 4
Signal cable description ...................................................................... 4
Control cable description..................................................................... 5
Front panel control .............................................................................. 6
OSD menu - Screen menu.................................................................. 7
Display ................................................................................................ 8
Mirror function ..................................................................................... 9
Camera ............................................................................................... 9
Factory default settings ....................................................................... 11
Cam out............................................................................................... 11
Exit OSD ............................................................................................. 12
Installation of camera.......................................................................... 13
Setting of distance gauges.................................................................. 14
Monitor specifications.......................................................................... 15
Camera specifications......................................................................... 17
Accessories......................................................................................... 18
PACKAGE CONTENTS:
1. 7" LED monitor 16:9.
2. Sun-hood.
3. Mounting brackets.
4. Mounting parts.
5. Control cable.
6. Camera w/ infrared LED’s and built-in microphone.
7. 20 mtr. camera cable.
8. User manual.
CAUTION:
Do not add any parts or use any accessories which are not
provided from the manufacturer.
Do not adjust settings while driving, due to risk of accidents.
Do not apply pressure to the screen.
Do not use any liquid to clean the monitor. If you need to
clean it, please use a LCD cleaning cloth.
4Vedpak 98UK_Version 5_010909
160775
GB
5
FEATURES:
Advanced OSD Menu for easy use
Supports up to 4 CCD Camera inputs (6 pin Mini DIN).
Extra RCA input for multimedia (VCD, DVD, Game device).
Provide 2 Video / 1 Audio signal output.
Support Single / Dual / Triple / Quad Screen (Cam out)
Signal Trigger for Rear / Left / Right / AV.
OSD control for Individual Normal / Mirror Camera Image.
Auto Day and Night control via photo diode sensor.
Auto Detection for NTSC / PAL System.
Supported 9.6V~32V Car power system working
Professional Metal Case with Anti Shocking Design
INSTALLATION OF MONITOR:
1. Check the package and make sure all parts are included.
2. Clip the sun-hood on to the monitor and make sure it is installed properly.
3. Install the monitor on to the bracket.
4. Adjust the monitor to an appropriate / comfortable viewing angle before tightening the screws.
5. Connect the control cable to the power socket which is located at the rear side of the monitor.
6. Monitor installation is now completed. Each control cable wire is attached with a sticker to indicate its signal function.
SIGNAL CABLE DESCRIPTION:
1. Cam-R (Mini DIN).
For rear vision camera connection.
(Selection of CAM-R overrides selections of other cameras).
2. Cam-A.
For 2nd camera connection.
3. Cam-B.
For 3nd camera connection.
4. Cam-C.
For 4rd camera connection.
5. Live Video Out (RCA - White wire).
On screen video loop out (for recording, second monitor or other device.
6. Live Audio Out (RCA - Black wire).
On screen video loop out (for recording, second monitor or other device.
7. AV VIDEO IN (RCA - Yellow wire).
Connection for any Video signal DVD, VCD, Game, camera.
8. AV AUDIO IN (RCA - Red wire).
Connection for any Audio signal DVD, VCD, game.
9. CAM OUT (RCA - Green wire).
Video loop (for recording, second monitor or other device)
Set up by OSD under CAMERA set up window.
4 5 Vedpak 98UK_Version 5_010909
160775
GB
CONTROLCABLE DESCRIPTION:
Cable configuration
WIRE COLOUR
Red
Black
White
Blue
Orange
Yellow
FUNCTION
Acc power
(DC 9.6-DC32V.)
GND
Parking control
Reverse control
Camera 2
Camera 1
REMARKS
Active GND
Active Power Level.
Connect to reverse light.
Active Power Level.
Connect to direction
light (R).
Active Power Level.
Connect to direction
light (L).
ON SCREEN VIEW
1. Activation of the trigger cables for reverse, right or left overrides any selection of images and shows the triggered camera.
2. *When pull the hand break, user need to press SOURCE button again to display AV IN picture.
Don’t connect the red wire
(power wire) of this product
directly to the battery. Connect
the red wire of this product
to the ACC of the ignition key
switch. Failure to do so may
result in permanent damage of
the product.
Jump Source Power
Menu
AV
Jump Sourc e Power
Menu
C AM R
CA M R CA M B
C A M A C A M R
6Vedpak 98UK_Version 5_010909
160775
GB
7
FRONT PANEL CONTROL:
POWER: Press the POWER button to activate the monitor or to keep the monitor under stand by mode.
SOURCE: Press this button to select image sequence
CAM ACAM BCAM CCAM R CAM A+B CAM C+R
CAM A+RCAM R+BCAM A+CCAM C+B CAM R/AB
CAM R+ABCAM A……
With activated hand break, press this button to select image sequence
AVCAM A+BCAM C+RCAM A+RCAM R+BCAM A+C
CAM C+BCAM R/ABCAM R+ABCAM ACAM BCAM CCAM R AV……..
JUMP: Press this button to display defined camera input, user can select
QUADSEQCAM A+BCAM C+RCAM A+RCAM R+B
CAM A+CCAM C+BCAM R/AB CAM R+AB CAM A CAM B
CAM CCAM R via OSD as default value.
MENU: This encoder switch provides the following function:
1. Activate OSD menu:
Press the menuswitch to activate the OSD menu. After the OSD menu is activated, in case
the user does not proceed for further set up, the OSD menu will then automatically turn off
within 20 seconds.
2. Enter-function:
Press the encode switch to act as "Enter" Functions under the OSD menu.
3. Volume level:
Exit the OSD menu: user can turn this switch left or right to adjust the volume value.
6 7 Vedpak 98UK_Version 5_010909
160775
GB
OSD MENU:
1. Press the MENU button to enter the OSD Menu.
2. Turn the MENU button left or right to select the setting you wish to proceed.
The colour of the content will turn yellow to identify your selection.
3. Press the MENU button again until the colour of the content turns from yellow to red to
enter system settings.
Turn the MENU button left or right to adjust your setting value.
DISPLAY
OSD DISPLAY
CAMERA
RECALL
EXIT
SCREEN Menu
This menu set up contains different setting for the TFT LCD.
Brightness
Provide adjustment for shade and brightness level of TFT display.
Setting value from 0 ~ 100. Default value is 50.
Contrast
Provide adjustment for the light and dark level of the TFT display.
Setting value from 0 ~ 100. Default value is 50.
8Vedpak 98UK_Version 5_010909
160775
GB
9
Saturation
Provide adjustment for the light intensity level of TFT display.
Setting value from 0 ~ 100. Default value is 50.
Hue
Provide adjustment for the lightness and colorfulness level of TFT display.
Setting value from 0 ~ 100. Default value is 50.
(Only in NTSC system is available.)
Sharpness
Provide adjustment for the edge contrast (acutance) level of TFT display.
Setting value from 0 ~ 100. Default value is 50.
Return
Return to OSD menu selection screen.
DISPLAY Menu
This menu set up contains the on screen identication
and the activation of the distance gauge.
Auto Day&Night
Select “ON” to activate the auto day & night function or “OFF” to
deactivate it. Default value is OFF.
Display
Select “ON” to show the source of video input title on screen or “OFF” to keep it invisible.
Default value is ON.
Distance Gauge
Set the distance gauge “ON” to show the distance gauge on screen while reserving
or “OFF” to deactivate. Default value is ON.
(This “DISTANCE GAUGE” is for user’s reference only)
MIRROR:
Select "ON" to activate the mirror function for different cameras or "OFF" for a normal image.
Default values are following below setting.
CAM A ”OFF”
CAM B ”OFF”
CAM C ”OFF”
CAM R ”ON”
8 9 Vedpak 98UK_Version 5_010909
160775
GB
OSD Lock
This function provides protection when an unauthorized person tries to access the OSD settings.
JUMP and Source key press simultaneously for over 5 seconds to unlock. Default value is OFF.
Users must turn on LCD in order to run unlock process. All function buttons are still
working during OSD Menu lock up period.
Return
Return to OSD menu selection screen.
CAMERA Menu
This menu set up contains the on Camera and Jump setting.
MIRROR:
Select "ON" to activate the mirror function for different cameras or "OFF" for a normal image.
Default values are following below setting.
CAM A ”OFF”
CAM B ”OFF”
CAM C ”OFF”
CAM R ”ON”
10 Vedpak 98UK_Version 5_010909
160775
GB
11
Dir Image
The screen image setting of this panel during left / right turn:
TRIPLE: When you are making a right turn or left turn, the screen of
panel will display triple images for left hand side, right
hand side and rear view when you are making a right turn or left turn.
DUAL: With proper wiring, the screen will display dual image for
both rear and right hand side view when making a right turn.
While left turning, the screen will show dual image for both
rear and left hand side view.
SINGLE: Screen shows only single picture on direction turn. The screen
will show only left side view on left turn and only right side view on right turn.
Default value is SINGLE.
Rear Setup
The screen image setting of this panel during reverse gear:
R: Screen will display single image for Cam R only.
R+A: Screen will display dual image for both Cam R and Cam A.
R+B: Screen will display dual image for both Cam R and Cam B.
R/AB Screen will display triple image from Cam R ` Cam A ` Cam B.
R+AB Screen will display triple image from Cam R ` Cam A ` Cam B.
Default value is R.
Menu
CAM R
CAM B
C A M A
C A M R
C A M BC A M A
Table des matières
