I
II
Directions for preparing camera for use
Before loading
the camera
with film please
verify
whether the exposure meter battery Mallory RM
575 has been fitted and is in its proper position.
Open the cover (31) of the battery-housing by
meansof a coin and make sure that the battery
has
been
fitted with the side marked f upwards.
Close the battery-housing
by screwing down the
cover (31).
5
Loading the film
Push the lever of the back-cover locking-device
(30)in the direction of the arrow. The backcover
isthen unlocked
andwill open itself
automatically.
Pull out the rewind-knob (9) as far as possible,
insertthe film spool into the film spool housing
(22) and locate the spool by pushing in the re-
wind knob (9) Attention! Do not expose
the film
to direct sunlight
while loading.
lnsertthe protruding end of the film into the slot
of the take-up spool (26) and slowly advance
the
film by movingthe film-advance
lever (4) until the
sprocket of the film-transport drum engages
with
the perforationsof the film on both sides.
Then close the self-locking back-cover. . . The
filmcounter will automatically adjust itself to
S : Start. Then advancethe film by working the
film-advance lever (4) and the shutter release-
button at choice(3) or (14) until the filmcounter
showsthe number in its frame.
Set the film-type indicating dial (8) to the type
of film in use.
Now your CARENA msTL is ready
for use.
