Capture R2-HD5MPDME Manuel utilisateur

Camera OSD Operation Guide

For R2-HD5MPDME

ISSUE V1.0

DATE

2022-03-01

Operation Guide

Contents

Issue V1.0 (2022-03-03)

About This Document

Purpose

This document describes how to use the web management system for DVR and the cameras managed

by DVR.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal

injury.

Calls attention to important information, best practices and

tips.

NOTE is used to address information not related to personal

injury, equipment damage, and environment deterioration.

Operation Guide

Contents

Issue V1.0 (2022-03-03)

iii

Contents

About This Document.................................................................................................................... ii

Purpose...............................................................................................................................................................................ii

Symbol Conventions...........................................................................................................................................................ii

Contents ........................................................................................................................................... iii

1 OSD Main Menu........................................................................................................................... 1

1.1 Procedure......................................................................................................................................................................1

1.1.1 Camera Control Using Joystick................................................................................................................................. 1

1.2 OSD Main Menu Interface ...........................................................................................................................................1

2 OSD Setting ................................................................................................................................... 3

2.1 AE................................................................................................................................................................................. 3

2.2 AWB............................................................................................................................................................................. 4

2.3 DAY / NIGHT .............................................................................................................................................................. 6

2.4 IMAGE ENHANCE..................................................................................................................................................... 7

2.5 VIDEO SETTING........................................................................................................................................................ 9

2.6 LANGUAGE.............................................................................................................................................................. 10

2.7 RESET........................................................................................................................................................................ 10

2.8 SAVE&EXIT.............................................................................................................................................................. 10

2.9 EXIT........................................................................................................................................................................... 10

Operation Guide

Issue V1.0 (2022-03-03)

1 OSD Main Menu

1.1 Procedure

1.1.1 Camera Control Using Joystick

If your camera has four arrow buttons and one SET button, you can use the buttons to operate the OSD

main menu. Figure 1-1 shows the joystick.

Figure 1-1 Joystick layout

The buttons have the following functions:

SET: Press this button to open the OSD main menu or end setup.

UP/DOWN: Press the two buttons to select the upper or lower menu.

LEFT/RIGHT: Press the two buttons to select different modes.

----End

1.2 OSD Main Menu Interface

The OSD main menu interface includesAE, AWB, DAY/ NIGHT, VIDEO SETTING, LANGUAGE,

RESET, SAVE & EXIT, and EXIT, as shown in Figure 1-2.

Operation Guide

Issue V1.0 (2022-03-03)

Figure 1-2 OSD main menu interface

----End

Operation Guide

Issue V1.0 (2022-03-03)

2 OSD Setting

2.1 AE

AE is intended to adjust image brightness by setting parameters such as aperture, shutter, and gain. The

EXPOSURE interface includes BRIGHTNESS, EXPOSURE MODE.

Procedure

Step 1 Press the UP or DOWN button to select AE.

Step 2 Press the SET button to open the EXPOSURE interface, as shown in Figure 2-1.

Figure 2-1 EXPOSURE interface

Operation Guide

Issue V1.0 (2022-03-03)

Step 3 Press the UP or DOWN button to select BRIGHTNESS and press the LEFT or RIGHT

button to select a brightness value. The default brightness is 6 and the setting range is 0-100.

Step 4 Press the UP or DOWN button to select EXPOSURE MODE and press the LEFT or

RIGHT button to select a exposure mode.

The exposure mode includes GLOBE, CENTER, and BLC.

−BLC: Press the LEFT or RIGHT button to select BLC, press the LEFT or RIGHT

button to adjust BLC value. The default BLC is 1 and the setting range is 1-9.

−GLOBE: Press the LEFT or RIGHT button to select BLC.

Step 5 Press the UP or DOWN button to select RETURN and press the SET return to the OSD

main menu interface.

----End

2.2 AWB

White balance is intended to reproduce the actual colors of the observed scene when the illuminance

and color temperature of the target object are changed. You can set WB to GRAY WORLD, MWB or

PRO.

Procedure

Step 1 Press the UP or DOWN button to select AWB. Press the SET button to open the WB

interface, as shown in Figure 2-2.

Operation Guide

Issue V1.0 (2022-03-03)

Figure 2-2 AWB interface

Step 2 Press the LEFT or RIGHT button to set the MODE.The options are ATW and MWB. The

default mode is MWB

When MWB mode is selected, you can set white balance parameters, as shown in Figure 2-3.

Operation Guide

Issue V1.0 (2022-03-03)

Figure 2-3 MWB interface

1. Press the UP or DOWN button to select RGAIN, and press the LEFT or RIGHT button

to set RGAIN. The default RGAIN is 50 and the setting range is 0-100.

2. Press the UP or DOWN button to select BGAIN, and press the LEFT or RIGHT button

to set BGAIN. The default BGAIN is 50 and the setting range is 0-100.

Step 3 Press the UP or DOWN button to select RETURN, and press the SET button to return to the

OSD main menu interface.

----End

2.3 DAY / NIGHT

You can set Day / Night to B / W, COLOR,AUTO, or EXT.

Procedure

Step 1 Press the UP or DOWN button to select Day-Night. Press the SET button to open the Day /

Night interface, as shown in Figure 2-4.

Operation Guide

Issue V1.0 (2022-03-03)

Figure 2-4 DAY/NIGHT interface

Step 2 Press the LEFT or RIGHT button to set the Mode.

Step 3 Press the UP or DOWN button to select RETURN and press the SET return to the OSD

main menu interface.

----End

2.4 IMAGE ENHANCE

The Image Enhance interface includes CONTRAST, SHARPNESS, SATURATE, 2 DNR, D-WDR

FLIP, MIRROR and, as shown in Figure 2-5.

Table des matières

Autres manuels Capture Appareil photo numérique

Capture

Capture advance R2-HD2MPEYE Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur