Canon VBCollector Manuel utilisateur
VBCollector
User’s Manual
E
ENGLISH
Introduction
This manual describes the installation, configuration and operational procedures for VBCollector.
Please read this manual prior to use to ensure that you will be able to use the VBCollector effectively.
Exclusion of Liability
If the Product is connected to a recording device (for example a VCR), Canon Inc. accepts no
responsibility whatsoever for any financial losses that may be incurred as a result of the loss of
recorded information or images, regardless of the internal or external cause of the loss.
Copyright Information
Video or still pictures recorded using your Network Camera VB-C50i/VB-C50iR, VB-C10/VB-C10R
and Network Camera Server VB150 cannot be used in ways that infringe copyright laws or without
the consent of the owner, unless intended for personal use only.
Notes
1. The unauthorized transfer of all or any part of the contents of this Manual is forbidden.
2. The contents of this Manual are subject to change without notice.
3. Every effort has been made to ensure that this Manual is flawless. However, if you find any
oversights, please let us know.
4. Notwithstanding the above, Canon accepts no liability for any results arising from the operation
of this product.
Trademark Notices
●Canon and Canon logo are registered trademarks of Canon Inc.
●Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States
and other countries.
●Windows is legally recognized as Microsoft Windows Operating System.
●Other brand or product names in this manual may be trademarks or registered trademarks of
their respective companies.
© Copyright 2004 CANON INC.
ALL RIGHTS RESERVED
1
Contents
Introduction .................................................................. 1
Contents ....................................................................... 2
Overview of VBCollector ............................................. 3
Operating Environment and Installation .................... 4
Operating Environment .............................................................. 4
Installing VBCollector................................................................. 4
Configuring and Operating the VBCollector.............. 6
Starting Up VBCollector ............................................................. 6
Registering a Server ................................................................... 6
Registering Tasks ....................................................................... 9
Executing and Canceling Tasks .............................................. 11
Details Displayed on the Task View......................................... 13
Starting/Stopping the Service ................................................. 14
Automatic Downloading by Notification ................................ 14
Viewing Recorded Images ....................................................... 16
Viewing Logs ............................................................................. 20
Setting Download Capacity ..................................................... 23
2
Downloaded image displays
Pictures recorded with
the Server’s picture
recording function
Pictures periodically collected
according to the task
Overview of VBCollector
VBCollector is used to view pictures recorded by the Network Camera VB-C50i/VB-C50iR, VB-C10/VB-
C10R and Network Camera Server VB150 (hereinafter referred to as Server). With VBCollector, you can
collect and display still pictures recorded by the Sever based on inputs from an external device, motion
detection or schedules. VBCollector accesses the Sever at specific times expressed in units such as dates,
weeks, or months, and then downloads the recorded pictures. Since the recorded pictures are saved one
after another in the PC on which VBCollector is installed, pictures can still be securely saved when the
allowable limit on the number of pictures that the Server can record and save has been exceeded.
Downloaded images can also be easily viewed in the Web browser. Information related to task execution
can also be recorded in a log.
3
c
Note
VBCollector cannot be installed on a PC where MV Ver. 2.0 or later, optional
software sold separately, has already been installed.
To Install...
If any other applications are running, please exit
them before installation. Please also be sure to
close the Windows Service Panel.
Double-click “CltSetup.exe” on the CD-ROM to start
up the installer. Click Next.
2If you agree to the clauses in the licensing
agreement, click Yes.
1
Installing VBCollector
4
Operating Environment and Installation
Operating Environment
Windows 2000 (SP4 or later)/Windows XP (SP1a or later)
Microsoft Internet Explorer 6.0 (SP1 or later)
Operating System
Web Browser
20GB HDD or greater (NTFS formatted)
Hard Disk
* If you configure your system to record pictures per second with servers and perform the maximum of 16 tasks (→P.11)
at the same time, it is recommended that you use a desktop PC with Pentium 4 2.2 GHz and 512MB RAM or greater.
* It is recommended that you configure to collect up to 10,000 still pictures/day per a camera server. It the total
amount of still pictures exceeds this value, it may take several minutes to display all the pictures.
•Network Camera VB-C50i/VB-C50iR
•Network Camera VB-C10/VB-C10R with Firmware Ver. 1.0 Rev. 25 or later
• Network Camera Server VB150 with Firmware Ver. 1.1 Rev. 30 or later
• Network Camera Server VB101 with Firmware Ver. 3.0 Rev. 68 or later
You should ensure the firmware version used is the latest one.
The latest firmware can be downloaded for free from the following WebView Product web page:
canon.com/webview
VBCollector Ver. 2.02
Supported Camera Servers
5Check the settings and items you have selected thus
far, and click Next to confirm. The installation will
proceed by copying files and making registry
settings, etc.
Click Finish to complete the installation.
6
When installation is complete, “VBCollector Task
View” is added to the Start menu.
5
4Specify the menu name to be registered in the
Program menu of the Start button, then click Next.
3Specify the target directory for the installation and
click Next.
If you have no special directory preference, just click
Next.
VBCollector is started up by choosing it from Start menu.
To Start Up VBCollector...
Choose [Program]-[WebView Livescope]-[VBCollector
Task View] from the Start menu to start up VBCollector.
Starting Up VBCollector
To use VBCollector, server from which the VBCollector downloads pictures must be registered.
Registering a Server
To Add a New Server...
To add a server, choose Add from the Server menu,
or click Add on the Server List dialog box that
appeared when Edit from the Server menu was
selected.
1
Adding a server
Add a new server to which VBCollector will download pictures.
6
Configuring and Operating the VBCollector
2Enter the various fields and click OK.
●Server Name
Assign a name for recognizing the Server (optional).
●Image Directory
Enter the name of the directory where downloaded images are to be saved, or click Browse to select a
directory folder. Refer to the next page for how to download images to a shared folder on the network.
Delete images on the server
When this check box is selected, pictures that VBCollector downloaded from the server will also be deleted
from the server.
●Server information
Host Name
Specify an IP address or a host name.
HTTP Port
Enter the HTTP port number set in the server. (The default setting is 80.)
Administrator Account
Enter an administrator account registered in the server (root).
Administrator Password
Enter the administrator password registered in the server. (The default setting is VB-C50i.)
Settings Page URL
Enter the “Path” to the setting title page set in the server (admin).
●Proxy
Use Proxy Server
Select if connecting through a proxy server.
Host Name
Specify a host name or IP address for the proxy server.
Port
Enter a port number for the proxy server. (The default setting is 8080.)
●PPP
Use PPP connection
Select if connection will be established by dialing up.
PPP Connection Name
Select a phone number from the phone book entry. A dialup network will need to have been installed and
the phone number will need to have been registered in the phone book.
Account
Enter the PPP account to be used for the dialup connection.
Password
Enter the PPP password to be used for the dialup connection.
7
Configuring and Operating the VBCollector
e
Tip
Downloading images to a shared folder on the network
●You cannot specify a path name that uses a network drive in the “Image
Directory” setting. Use UNC notation to specify the path name.
\\PC name\shared directory name[\path]
Eg) \\Server\Share\path
●Set the folder access privileges for the “Image Directory” folder so that read/
write operations can be performed from machines with VBCollector installed.
●In case of using VBCollector in Windows 2000/XP, make the logon account
setting for VBCollector task scheduler service in the following procedure
(→P. 23).
1. Choose Options from Tools menu.
2. Select [Specify an account for downloading] under [Details] in the
option dialog.
3. Enter your user name and password.
4. Click OK.
*Specify an account from which you can log on to the download
destination machine.
*Set the folder access privileges so that read and write operations can
be performed from the download execution account to the folder in
which VBCollector is installed (the default setting is C:\ProgramFiles\
Canon\WebView\VB\VBCollector\2.0).
8
c
Note
●If using Windows 2000 or Windows XP, operate VBCollector with an
authority greater than PowerUser.
●NTFS is recommended for such file systems containing the installation
folder and the folder where images are saved.
●When using NTFS in the file system, set to permit reading and writing of
the installation folder and the folder where images are saved.
Functionality is limited if you do not have authority.
To Edit Server Information...
Editing Server Information
Content of the registered server information can be edited.
Choose Edit from the Server menu, and when the
Server List dialog box appears, select the server
name to be edited and click Edit.
To delete a registered server, click Delete.
1
2As with the procedure for adding servers, change all
desired items and click OK.
c
Note
Downloaded images are not deleted when a server is deleted. To delete
downloaded images, first follow the procedure in “Deleting Images” (→P.
19) and then delete the server.
Registering Tasks
To Add a New Task...
To add a task, choose New Task from the Task
menu.
1
Adding a task
Add a new task for downloading images.
9
Table des matières
Autres manuels Canon Logiciel
Canon
Canon PowerShot A530 Guide de sécurité
Canon
Canon MLT (S) Manuel utilisateur
Canon
Canon Vixia HG21 Manuel utilisateur
Canon
Canon HG-10 Manuel utilisateur
Canon
Canon EOS-1Ds Mark III Manuel utilisateur
Canon
Canon 9540A003 - Optura 400 Camcorder Manuel utilisateur
Canon
Canon EOS 7D Mark II (G) Manuel utilisateur
Canon
Canon DIM-538 Manuel utilisateur
Canon
Canon PowerShot SX1 IS Guide de démarrage rapide
Canon
Canon ELURA 100 - Camcorder - 1.3 MP Manuel utilisateur
Canon
Canon EOS-1D Mark II Digial Manuel utilisateur
Canon
Canon ELURA 100 - Camcorder - 1.3 MP Manuel utilisateur
Canon
Canon Capture Perfect 3.0 Manuel utilisateur
Canon
Canon Selphy CP600 Instructions de montage
Canon
Canon Powershot S80 Guide de sécurité
Canon
Canon CanoScan FB 1200S Manuel utilisateur
Canon
Canon PowerShot A550 Manuel utilisateur
Canon
Canon HV20 - VIXIA Camcorder - 1080i Manuel utilisateur
Canon
Canon VIXIA HF M32 Manuel utilisateur
Canon
Canon CanoScan D646U Manuel utilisateur
Manuels Logiciel populaires d'autres marques
PS Audio
PS Audio PowerPlay Manuel du propriétaire
Brady
Brady LOCKOUT PRO 3.0 Manuel de service
Avaya
Avaya Interaction Center Manuel utilisateur
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuel
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur
Oracle
Oracle Application 9i Manuel utilisateur
Acer
Acer RDM Manuel utilisateur
Samsung
Samsung Auto Backup Manuel utilisateur
Polycom
Polycom Vortex EF2201 Instructions d'installation et d'utilisation
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuel utilisateur
Novell
Novell SP2 - S Mode d’emploi
Lexmark
Lexmark Apps Manuel de service