Canon 8600F - CanoScan Manuel utilisateur

QT5-0828-V02 ©CANON INC. 2007 PRINTED IN CHINA

IMPRIME EN CHINE

Quick Start Guide

Guide de démarrage rapide

Schnellstart-Referenz

Guida rapida all’installazione

Guía de inicio rápido

Guia de Início Rápido

Aan de Slag gids

English

Deutsch

Italiano

Nederlands

Français

Español

Português

English

Please read this guide before operating this scanner. After you finish reading this guide, store it in

a safe place for future reference.

Package Contents

Scanner and Accessories

Documentation

• Quick Start Guide (this document)

• Additional Documents

CanoScan Setup Utility CD-ROM

• Software Programs

- ScanGear (scanner driver)

- CanoScan Toolbox

- ArcSoft PhotoStudio

- Presto! PageManager (Windows only)

- ScanSoft OmniPage SE (not supported for Windows 98 First Edition)

- Adobe RGB (1998) (Windows only)

• On-screen Manuals

- Scanning Guide (for ScanGear, CanoScan Toolbox, and troubleshooting)

- Manuals for bundled application programs

Adobe Photoshop Elements 4.0 CD-ROM

• Windows CD-ROM (English/French/German)

• Macintosh CD-ROM (English)

Refer to the instruction sheet for installing.

*In this guide, Windows XP screenshots are used to illustrate explanations common to all

operating systems.

Table of Contents

Package Contents ........................................ 1 Using the Scanner Buttons .......................... 5

Installing the Software ................................ 2 Scanning Film ............................................... 6

Preparing the Scanner ................................. 3 Specifications ............................................... 9

Try Scanning ................................................. 4

Quick Start Guide

Scanner USB Cable

Film Guides

(for 35mm film strip/slide )

AC Adapter

Film Guide

(for 120 format film)

Installing the Software

1Place the CanoScan Setup Utility CD-ROM in the

drive.

If prompted, select your language and place of residence.

CanoScan Setup Utility program starts.

• For Macintosh: Double-click the [Setup] icon. Enter the

administrator ID and password on the authentication dialog

box.

2Click [Easy Install] on the main menu.

3Click [Install] to start installation.

Carefully read the License Agreement, and then click [Yes] to

proceed. All the software programs and on-screen manuals will

be installed on your computer.

4For the bundled applications, follow the on-screen

instructions to perform the installation.

5When the installation is complete, click [Restart] to

restart your computer.

• Do NOT connect the scanner to a computer before installing the software. If you

connect the scanner and the Found New Hardware Wizard appears, click [Cancel].

• Quit all running applications before installation, including anti-virus software.

• For Windows 2000/XP, log in as an administrator to install the software.

• Make sure to remove the CD-ROM from the drive and store it in a

safe place.

• If you encounter a problem during installation, see

"Troubleshooting" in the Scanning Guide.

• If you later upgrade your OS to Windows XP, reinstall the software.

Preparing the Scanner

English

Preparing the Scanner

Unlocking the Scanner

1Peel the seals off the scanner.

2Slide the lock switch on the bottom of the scanner toward the unlock mark ( ).

Connecting the Scanner

1Attach the FAU cable to the FAU connecter.

2Connect the scanner to your computer with the supplied USB cable.

3Connect the supplied AC adapter to the scanner, and then plug in.

4Press ( I ) to turn the power on.

• Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock.

• Handle the scanner with both hands. Be careful not to drop the scanner.

• Always lock the scanner when carrying or transporting it.

• When locking the scanner, do not lift up the back and tilt the front (scanner button

location) downward. You may be unable to set the lock.

• Only use the USB cable and the AC adapter provided with the scanner. Use of other

cables or adapters may lead to a malfunction.

• When the scanner is connected to the USB 1.1 port on Windows XP and "HI-SPEED USB

Device Plugged into non-HI-SPEED USB Hub" message appears, ignore the message. The

scanner operates in this condition without problems.

Unlock Mark

Try Scanning

This section explains the basic scanning procedures using the image editing program, ArcSoft PhotoStudio,

and the scanner driver, ScanGear.

1Place a document on the document glass and

close the document cover.

2Start ArcSoft PhotoStudio.

For Windows: Select [start] - [(All) Programs] -

[ArcSoft PhotoStudio 5.5], then click [PhotoStudio 5.5].

For Macintosh: Open [Applications] - [PhotoStudio]

folders, then double-click the [PhotoStudio] icon.

3From the [File] menu, click [Select Source] and select the scanner model.

For Windows: Do not select the one that includes [WIA] in the model name.

4Click the [Acquire] icon to start ScanGear.

5Select the type of document you are scanning in

[Select Source] and click [Preview].

6Set [Destination] and/or [Output Size] as needed.

7Click [Scan] to start scanning.

8When prompted to close ScanGear, click [OK].

9Save the scanned image in ArcSoft PhotoStudio and

close the window.

Do not touch the scanner while it is

operating.

• For more information on scanning using ScanGear, bundled applications, and troubleshooting, see the on-screen

manual Scanning Guide. To open the Scanning Guide, double-click the Scanning Guide icon on the desktop, or click

on in ScanGear or CanoScan Toolbox.

Top

Bottom Alignment

Mark

Using the Scanner Buttons

English

Using the Scanner Buttons

Scanner buttons allow you to copy, scan, e-mail, and save scanned images in PDF format with a press of a

button. Simply place your document on the scanner, and then press the scanner button for the required

function. For more information, see the Scanning Guide.

• Before using scanner buttons, make sure that all the software programs are installed on your computer using the [Easy

Install] option of the CanoScan Setup Utility program. See "Installing the Software" on page 2.

•For Mac OS X 10.3 and 10.2.8: Before using the scanner buttons, you need to set Image Capture (in [Applications]

folder) to open CanoScan Toolbox automatically when a scanner button is pressed.

Start Image Capture, and then perform the following.

- Mac OS X 10.3: Click [Options] and select CanoScan Toolbox in [When a scanner button is pressed, open:].

- Mac OS X 10.2.8: Select [Other] in [When a scanner button is pressed, open:]. Select CanoScan Toolbox and click [Open].

Click [OK] and quit Image Capture. For more information, see "Troubleshooting" in the Scanning Guide.

PDF Buttons

PDF buttons allow you to easily create PDF

iles according to your needs. Note that these

buttons are not labeled on the scanner.

COLOR Button

Scans color images in A4 or Letter size*at 300

pi.

BLACK & WHITE Button

Scans black & white images in A4 or Letter

ize*at 300 dpi.

CUSTOM Button

Scans images in user-specified settings.

FINISH Button

Ends the operation and saves the scanned

image in a PDF file.

*The size may differ depending on your system

environment.

COPY Button

Prints (copies) the scanned image with a

printer.

PHOTO/FILM Button

Opens the scanned image in the bundled

application program, ArcSoft PhotoStudio.

E-MAIL Button

Attaches the scanned image to a new e-mail

message.

The first time you press this button, you will be

prompted to select the e-mail program to use with

this function.

Scanning Film

This scanner can scan 35 mm film (film strip or slide) and 120 format film. Follow the procedure below when

scanning film. Make sure that the FAU Cable is connected to the FAU connector on the back of the scanner.

1Remove the protective sheet from the

document cover.

Press and hold the lever at the top of the protective

sheet while you apull the sheet outward and b

detach it.

2Insert the film into the Film Guide.

35mm Film Strip

cOpen the film holder on the film guide, place the film face down and close the film holder.

dAlign the Film Guide’s tab with the FILM symbol on the document glass of the scanner.

• Store the protective sheet in a safe place so that it will not get bent or broken.

• Always put the protective sheet back when you are not scanning film to protect the

light source in the document cover.

• Use a blower brush to remove any dust from the film, which will affect the image quality,

and take care to hold the film by its edges to avoid transferring dirt or fingerprints to it.

• Do not block the calibration slot on the Film Guide when scanning film. Colors will not

be scanned correctly if the calibration slot is obstructed.

• Close the Film Guide securely. Press lightly until it clicks into place.

• Place a black piece of paper over any gap to shield the light if you are inserting a film

strip with 5 or fewer frames, or if the edge of a scanned image appears whitened.

• Ensure that there is no gap between the edge of the film and the film guide on the

side near the calibration slot.

Film Holder

Calibration Slot

Scanning Film

English

35mm Slides

cAlign the Film Guide’s tab with the FILM symbol on the document glass of the scanner.

dPlace a slide or slides face down (correctly viewed from

below) in the Film Guide as shown in the diagram to the

right.

120 Format Films

cOpen the film holder on the film guide, place the film face

down and close the film holder.

dAlign the Film Guide’s tab with the FILM symbol on the

document glass of the scanner.

3Close the document cover.

• Leave a gap of 5 mm or greater between

film strips when placing two or more on the

document glass.

• Ensure that there is no gap between the

edge of the film and the film guide on the

side near the calibration slot.

Using a Film Retainer Sheet

Curled film strips can stick to the document glass and cause

a pattern of rings called Newton Rings to appear on the

scanned image. If this occurs, scan using the supplied film

retainer sheet as shown in the diagram.

(A) Scan with the film retainer sheet inserted beneath the

film.

(B) If Newton Rings still appear after following Instruction

(A), turn the film strip over and place it in the film holder

with the film retainer sheet on top so that the film edges

are held down for scanning. Then preview the image in

ScanGear and click the [Mirror] button to reverse the

image before initiating the final scan.

To avoid damaging the film, always place

the glossy side (the side without an illustra-

tion) of the film retainer sheet against the

film.

(A) Film Holder

120 Format Film

Film retainer

sheet

With its glossy side

facing upward, slip

the film retainer

sheet under the film.

(B)

Hold the film edges

down by placing

the film retainer

sheet on top with

its glossy side facing

downward.

Scanning Film

4Start ArcSoft PhotoStudio, then start

ScanGear.

Follow the steps 2 to 4 in "Try Scanning" on page 4.

5Select [Negative Film (Color)] or [Positive

Film (Color)] in [Select Source] to match the

type of film you are scanning, then click

[Preview].

6Place a check mark beside the number(s) of

the frame(s) you want to scan. Perform

image corrections as needed.

7Click [Scan] to start scanning.

8When prompted to close ScanGear, click [OK].

9Save the scanned image in ArcSoft

PhotoStudio and close the window.

Do not touch the scanner while it is

operating.

• Do not leave the film strip in the film guide for an extended period of time as heat from

the unit may damage the film.

• For more information on scanning film, see “Scanning Film” in the Scanning Guide.

Specifications

English

Specifications

*1 Optical Resolution represents the maximum sampling rate based on ISO 14473.

*2 For film scanning only.

*3 The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time is not included. Scanning

speed varies according to the document types, scan settings, or specifications of the computer.

*4 Calibration processing time is not included.

*5 AC adapter type varies according to the region in which the scanner is purchased.

Use only AC adapters listed in the user instructions. (Canon AC Adapter: K30279 is for United Kingdom

and K30278 is for other EU countries). Do not use them for other products.

• Specifications are subject to change without notice.

Model Number: K10294 (CanoScan 8600F)

CanoScan 8600F

Scanner Type Flatbed

Scanning Element CCD 6-line color

Light Source Cold cathode fluorescent lamp

Optical Resolution *1 4800 x 9600 dpi

Selectable Resolution 25–19200 dpi (ScanGear)

Scanning Bit Depth

Color 48 bit input (16 bit for each color)

48 bit or 24 bit output (16 bit or 8 bit for each color)

Grayscale

48 bit input (16 bit for each color)

16 bit

or 8 bit output

Scanning Speed *3

(Photo or Document)

Color 6.9 msec./line (2400 dpi), 13.8 msec./line (4800 dpi)

Grayscale, B&W 6.9 msec./line (2400 dpi), 13.8 msec./line (4800 dpi)

Scanning Speed *3 (Film) 6.8–67.5 msec./line

Preview Speed *3*4 Approximately 4 sec.

Interface USB 2.0 Hi-Speed

Maximum Document Size A4/Letter: 216 x 297 mm

Film Type/Number of Frames 35 mm strip (12 frames max)/35 mm slide (4 frames max)

120 format film: max. 6 x 22 cm (filmstrip only)

Scanner Buttons 7 buttons (PDF x 4, COPY, PHOTO/FILM, E-MAIL)

Operating Range

Temperat ure 10qC to 35qC (50qF to 95qF)

Humidity 10% to 90% RH, 20% to 80% RH for film scanning

without condensation formation

Power Requirements AC adapter (100/120/230/240V) *5

Power Consumption In operation: 18 W maximum, Stand-by: 5 W, Switch-off:

0.5 W (Using supplied AC adapter)

Maximum Exterior Dimensions 283 x 467 x 120 mm

Weight Approximately 4.3 kg

Autres manuels pour 8600F - CanoScan

Table des matières

Langues :

Autres manuels Canon Scanner

Canon

Canon imageFORMULA DR-3080CII Instructions d'utilisation

Canon

Canon P-208 Manuel utilisateur

Canon

Canon ScanFront 300eP Manuel utilisateur

Canon

Canon imageFORMULA DR-2050C Manuel utilisateur

Canon

Canon 5600F - CanoScan - Flatbed Scanner Instructions d'utilisation et d'installation

Canon

Canon DR 5010C - imageFORMULA - Document Scanner Manuel utilisateur

Canon

Canon CanoScan LiDE 25 Manuel utilisateur

Canon

Canon imageFORMULA P-215 Manuel utilisateur

Canon

Canon CanoScan 9000F Mark II Manuel utilisateur

Canon

Canon CanoScan D1230UF Manuel utilisateur

Canon

Canon CANOSCAN FB1210U Manuel utilisateur

Canon

Canon imageFORMULA DR-M140 Manuel utilisateur

Canon

Canon DR-5020 Manuel utilisateur

Canon

Canon 8800F - CanoScan - Flatbed Scanner Manuel utilisateur

Canon

Canon DR-4580U Manuel utilisateur

Canon

Canon ImageFormula R10 Manuel utilisateur

Canon

Canon 4400F - CanoScan - Flatbed Scanner Manuel utilisateur

Canon

Canon imageFORMULA DR-M140 Manuel utilisateur

Canon

Canon CanoScan 3000 Manuel utilisateur

Canon

Canon DR-5060F Manuel utilisateur

Canon

Canon FB330P/FB630P Manuel utilisateur

Canon

Canon Microfilm Scanner 350 Manuel utilisateur

Canon

Canon DR-2020U - imageFORMULA - Document Scanner Manuel utilisateur

Canon

Canon 8600F - CanoScan Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur