Canon PIXMA PRO-100 Series Manuel utilisateur

PIXMA PRO-100

Setup Guide

series

PIXMA PRO-10 series

Setup Guide

This guide provides information for setting up a network connection for the printer.

Network Connection

Wireless Connection

Preparation for Connection

Connection Using WPS

Wired Connection

Preparation for Connection

Cable Connection

Printer Setup

Troubleshooting

Network Connection

Wireless Connection

aPreparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the POWER lamp (A) will be lit.

Notes on Wireless Connection

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to.

The conﬁ guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

Check if your device supports IEEE802.11n, 802.11g or 802.11b.

If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11 n only."

For ofﬁ ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

This printer cannot be used over wireless and wired connections at the same time.

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

•

bConnection Using WPS

1. Press and hold the Wi-Fi button (A) on the printer when you are ready to press the button on the

access point.

2. Make sure that the (blue) Wi-Fi lamp ﬂ ashes quickly and the POWER lamp is lit as shown in the

illustration above, then press and hold the button on the access point within 2 minutes.

3. Make sure that the (blue) Wi-Fi lamp and POWER lamp are lit.

The network connection setup is now complete.

Wired Connection

aPreparation for Connection

Before Starting Wired Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the POWER lamp (A) will be lit.

Notes on Wired Connection

Make sure that the computer and router (A) (or access point) are connected.

The conﬁ guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

For ofﬁ ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

This printer cannot be used over wireless and wired connections at the same time.

When using a router, connect the printer and computer to the LAN side (same network segment).

bCable Connection

You will need an Ethernet cable (sold separately).

1. Remove the Cap (A) from the upper port located on the right side at the back of the printer.

•

2. Connect the printer and a network device (router, etc.) with an Ethernet cable (A).

Please make sure to use the correct port on the back of the printer. Do not connect it to the USB port.

cPrinter Setup

1. Hold down the RESUME/CANCEL button (A) on the printer until the POWER lamp ﬂ ashes 11 times,

then release the RESUME/CANCEL button after the eleventh ﬂ ash.

The wired connection setup is complete.

The network connection setup is now complete.

Troubleshooting

WPS

When the (blue) Wi-Fi lamp ﬂ ashes slowly and the (orange) Alarm lamp is lit:

Press the button on only one access point.

Check the security settings of the access point.

After checking the above points, wait for a while and conﬁ gure wireless connection setting again.

For details on how to check the security settings of the access point, refer to the manual supplied with the access

point or contact its manufacturer.

When the (blue) Wi-Fi lamp ﬂ ashes quickly and the (orange) Alarm lamp is lit:

Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back

on.

Are the computer and network device conﬁ gured?

Are the access point and printer installed in an open space where wireless communications are possible?

Is the access point operating in IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b?

Wait for a while, then bring the access point and printer close to each other, and conﬁ gure wireless connection

settings again within a speciﬁ ed time.

For details on how to check the settings of the access point, refer to the manual supplied with the access point or

contact its manufacturer.

To conﬁ gure wireless connection settings again

To conﬁ gure wireless connection settings again, press the RESUME/CANCEL button (A).



•



•



Autres manuels pour PIXMA PRO-100 Series

Table des matières

Autres manuels Canon Imprimante

Canon

Canon PIXMA MG5120 Manuel utilisateur

Canon

Canon 2435B019 Manuel utilisateur

Canon

Canon CP-100 Manuel utilisateur

Canon

Canon i475D Series Manuel utilisateur

Canon

Canon Color Bubble Jet BJC-1000 Series Manuel utilisateur

Canon

Canon imagePROGRAF iPF771 Manuel utilisateur

Canon

Canon Pixma MG2500 Series Manuel utilisateur

Canon

Canon SmartBase MPC200 Guide de l'utilisateur

Canon

Canon imagePROGRAF iPF6350 Guide de l'utilisateur

Canon

Canon Pixma MG3550 Guide de configuration

Canon

Canon imageCLASS LBP161dn Manuel utilisateur

Canon

Canon advanced anywhere print Manuel utilisateur

Canon

Canon PIXMA MX340 Series Manuel

Canon

Canon i 320 Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE C2200 Series Manuel utilisateur

Canon

Canon imageRUNNER 2745i Manuel utilisateur

Canon

Canon imageCLASS MF4100 Series Guide de sécurité

Canon

Canon PIXMA TS7451i Manuel utilisateur

Canon

Canon PIXMA MG3000 SERIES Guide de configuration

Canon

Canon iPF6100 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon iP1500 - PIXMA Color Inkjet Printer Manuel utilisateur

Canon

Canon BJC 6000 - Color Inkjet Printer Manuel utilisateur

Canon

Canon iPF650 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon TS3500 Series Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien