Canon Oce VarioPrint 135 Manuel utilisateur

Océ VarioPrint 135

Customer Expectations Document

Version 7

Engineering Services and Solutions Division

Business Imaging Systems Group, Canon U.S.A., Inc.

Version 7 Océ VarioPrint 135 Customer Expectations Document Page 2

Contents

1. Introduction.............................................................................................................5

2. Product Overview...................................................................................................5

2.1 Summary of Functions....................................................................................6

2.2 Offset Press vs. Océ DirectPress....................................................................7

2.3 Standard Configuration...................................................................................7

2.4 PRISMAsync Controller...................................................................................8

2.4.1 PRISMAsync System Backup............................................................8

2.4.2 PRISMAsync Firmware Updates .......................................................9

2.5 Professional Input/Output Accessories .........................................................10

3. Machine Dimensions and Space Requirements................................................11

3.1 Dimensions ...................................................................................................11

3.2 Weight...........................................................................................................12

3.3 Dimensions Diagrams...................................................................................13

3.4 Floor Structure Requirements.......................................................................14

4. Power/Electrical Requirements...........................................................................15

4.1 Power Requirements for the Main Unit and Optional Accessories................15

5. Environmental Factors and Requirements.........................................................16

5.1 Temperature and Humidity Conditions..........................................................16

5.2 Temperature Gradient...................................................................................16

5.3 Ventilation .....................................................................................................17

5.4 Lighting..........................................................................................................17

5.5 Sunlight.........................................................................................................17

5.6 Ammonia.......................................................................................................17

6. Specifications.......................................................................................................18

6.1 Main Unit.......................................................................................................18

6.2 PRISMAsync Controller.................................................................................20

6.2.1 USB Stick.........................................................................................21

6.3 Duplex Color Image Reader-D1 with Feeder................................................22

6.4 ePIM-C1........................................................................................................23

6.5 Document Insertion Unit-F1 ..........................................................................24

6.6 High Capacity Stacker-E1.............................................................................24

6.7 High Capacity Stacker-F1 .............................................................................25

6.8 Paper Folding Unit-F1...................................................................................25

6.9 Finisher-AF1..................................................................................................26

6.10 Saddle Finisher-AF2 .....................................................................................29

6.11 Puncher Unit-BQ1.........................................................................................32

6.12 Booklet Trimmer-D1......................................................................................32

6.13 Two-Knife Booklet Trimmer-A1.....................................................................33

6.14 SDD Square Fold Booklet-Maker with Two-Knife Trimmer ...........................34

6.15 SDD Square Fold Booklet-Maker..................................................................35

6.16 PowerLift.......................................................................................................35

Version 7 Océ VarioPrint 135 Customer Expectations Document Page 3

7. System Options and Software.............................................................................36

7.1 Remote User Interface-C1 ............................................................................36

7.2 Removable HD Kit-C1...................................................................................36

7.3 Océ PRISMAaccess......................................................................................36

7.4 Océ PRISMAprepare ....................................................................................36

7.5 Other Océ VarioPrint 135 Software Optional Licenses .................................37

8. Installation Review ...............................................................................................38

8.1 Installation Time............................................................................................38

8.2 Customer Responsibilities.............................................................................38

9. Printer Operation Care.........................................................................................39

10. Consumables........................................................................................................40

10.1 Consumable Parts.........................................................................................41

10.1.1 Estimated Life of Consumables.......................................................41

11. Toner Container and Toner Supply Unit Yields.................................................42

12. Estimated Performance Standards.....................................................................42

13. Optimum Monthly Product Performance............................................................43

14. Machine Reliability and Productivity..................................................................44

14.1 Machine Reliability and Service Call Ratio....................................................44

14.2 Print Speed ...................................................................................................45

14.3 Mixed Media Productivity ..............................................................................45

14.4 Paper and Toner...........................................................................................46

15. Media Usage/Compatibility..................................................................................47

15.1 Media Characteristics by Media Library Parameters.....................................47

15.2 Media Specific Adjustments..........................................................................48

15.3 Advanced Media Settings..............................................................................49

15.4 Paper Handling and Storage.........................................................................50

15.5 Selecting the Correct Media..........................................................................51

15.6 Note for Customers Who Cut Their Own Paper............................................51

15.7 Paper Sizes and Feed Location Chart ..........................................................52

16. Responsibility Matrix ...........................................................................................53

Version 7 Océ VarioPrint 135 Customer Expectations Document Page 4

IMPORTANT

The purpose of this Customer Expectations Document is to explain the current

features and capabilities of the Océ VarioPrint 135, and provide customers

information about what to expect before purchasing the machine.

The information included in this document has been pulled from various sources,

including product reference guides, service guides, and user manuals.

Specifications and other information contained herein may vary slightly, and in a

non-material way, from actual device values, including those found in advertising

and other printed matter. Part numbers, yield information, and specifications are

subject to change without notice. Accordingly, the latest specifications for the

machine may not be found in this document. As new information becomes

available, this document will be revised. Canon authorized dealers can access the

latest revision of this document from the Download Center page on the e-Support

Web site (support.cusa.canon.com).

DISCLAIMER

NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE

PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE

(UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON

OR ANY AUTHORIZED SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT,

FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR

SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA,

INCLUDING, WITHOUT LIMITATION, DATA STORED ON THE PRODUCT’S HARD

DISK DRIVE, STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO

USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE

CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY

AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON

OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN

AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE

ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER

ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO

PERSONS AND THE PROPERTY OF THE PURCHASER OR OTHERS ARISING

OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT

NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR

ANY AUTHORIZED SERVICE PROVIDER.

Océ is a registered trademark of Océ -Technologies B.V.

Product and company names used herein are, or may be, the registered trademarks or

trademarks of their respective owners.

Version 7 Océ VarioPrint 135 Customer Expectations Document Page 5

1. Introduction

The Océ VarioPrint 135 Customer Expectations Document contains information

about the features and capabilities of the Océ VarioPrint 135. This document

should be used as part of the presale and preinstallation planning processes to

help clarify the requirements and responsibilities associated with supporting,

owning, and operating the Océ VarioPrint 135. It is also recommended that those

interested in purchasing the Océ VarioPrint 135 have, and familiarize themselves

with, the information in this document prior to making their purchase.

2. Product Overview

The Océ VarioPrint 135 is a co-development product of Canon and Océ. This

machine integrates Canon’s accessories with Océ’s engine, PRISMAsync

controller, and operation management.

The Océ VarioPrint 135 brings the following capabilities to users in a high-volume,

light- to mid-production office environment, including commercial printers,

Print-for-Pay, graphic arts, and CRD customers:

•Printing/copying speeds of up to 135 ipm (images-per-minute)*1 (Duplex, LTR,

and B&W (Black-and-White)).

•One integrated 15” full-color touch screen operator panel for the total system.

•One media catalog for the total system.

•Prints up to 600 x 2,400 dpi (dots per inch). This results in higher quality

characters, smoother corners, and cleaner gradient transitions. Text appears

sharper, and graphics appear clear and detailed.

•Copies up to 600 x 1,200 dpi.

•Scans in up to 600 x 600 dpi.

•Dust-free toner filling and no waste toner or ozone is generated.

•Vacuum feed, air separation, Océ HeatXchange process, Océ ScreenPoint

technology, Océ DirectPress print process, and Océ EnergyLogic process ensure

reliable media handling from up to 13 lb bond to 110 lb cover (50 to 300 g/m2).

•PRISMAsync controller offers optional scheduling feedback software for

production planning on the user interface for up to 8 hours.

•Optional operator’s attention light with adjustable “warn-ahead” timing.

•POC (Printer Operation Care) enables the operator to safely replace certain parts,

increasing uptime.

*1 An image is defined as any text, graphics, or combination of the two, that fits onto one side of

a single sheet (or page) of paper. Therefore, a printing/copying speed of approximately

135 ipm in the duplex mode equates to approximately 67.5 ppm (pages-per-minute).

IMPORTANT

•Friction fed finishing is not recommended due to the risk of slight toner abrasion.

•When running certain applications, which contain large areas of heavy coverage

of solid black toner, you may observe some minor density changes from the lead

edge to trail edge on the print.

Version 7 Océ VarioPrint 135 Customer Expectations Document Page 6

2.1 Summary of Functions

Function

Océ VarioPrint 135

Print Speed (LTR) B&W 135 ipm

Scan Speed

(300 dpi, LTR)

Simplex,

B&W and

Color

120 ipm

Duplex,

B&W and

Color

Scan Speed

(600 dpi, LTR)

Simplex,

B&W and

Color*1 100 ipm

Duplex,

B&W and

Color

25 ipm

Scan Speed

(600 x 300 dpi,

LTR)

Simplex,

Duplex, and

Color

105 ipm

DADF

Standard duplex automatic document feeder

DADF Capacity

300 sheets (20 lb bond (80 g/m²))

Print Resolution

Up to 600 x 2,400 dpi

Copy Resolution

Up to 600 x 1,200 dpi

Scan Resolution

Up to 600 x 600 dpi

Gradations

200 levels

Paper Size

Minimum

5.5” x 7.2” (140 mm x 182 mm)

Maximum

12.6” x 19.2” (320 mm x 488 mm)

Paper Weight 13 lb bond to 110 lb cover (50 to 300 g/m²)

Maximum Printable Area

12.1” x 19.1” (308 mm x 484 mm)

Controller

Standard Océ PRISMAsync Controller

Controller HDD Capacity

160 GB

Controller Memory

2 GB

Security

Optional with E-Shredding license enabled on

the PRISMAsync controller

Copy

Standard

Scan

Standard for B&W*1

Standard

Network

Standard Ethernet 10/100/1000 Base-TX

*1 To scan in color, the optional Color Scan to File/E-Mail-C1 license must be installed.

Version 7 Océ VarioPrint 135 Customer Expectations Document Page 7

2.2 Offset Press vs. Océ DirectPress

Offset printing is a technique that transfers (or “offsets”) an inked image from a

plate to a rubber blanket, and then to the printing surface. This enables the offset

press to maintain a consistent and high-image quality over long print runs because

the plate never touches the paper. The process requires a substantial investment

in equipment and setup expenses to achieve these results.

Océ DirectPress converts digital data into a toner image in a single step. This

compact process is unaffected by temperature, static, or humidity. Therefore, it

offers stable performance and no deterioration in quality, while producing no ozone

or waste toner.

2.3 Standard Configuration

The standard configuration for the Océ VarioPrint 135 includes:

•Océ VarioPrint 135 main unit

•Duplex Color Image Reader Unit-D1

•Operator panel

•PRISMAsync controller (embedded in the main unit)

•Ethernet connection (via the PRISMAsync controller)

•USB connection (via the operator panel)

IMPORTANT

The customer must purchase the Océ VarioPrint 135 Base License V2 with or

without POC (Printer Operation Care). For more information on POC,

see “Printer Operation Care,” on p. 39.

Version 7 Océ VarioPrint 135 Customer Expectations Document Page 8

2.4 PRISMAsync Controller

The Océ VarioPrint 135 is powered by Océ’s PRISMAsync Print Controller.

The PRISMAsync controller seamlessly enables the customer to streamline their

workflow and turn out more work in less time with the following features:

•Scheduler - Plan-ahead functionality for multiple jobs simultaneously. The

scheduler only shows an estimated job completion time, not the actual time it

may take to complete a job. The actual job completion time may vary, depending

on mixed media jobs, mixplex jobs, selected Finishing settings, and color

adjustments.

•One queue and job management for printing and copying.

•Streaming (spooling, RIPing, printing, and cleaning up simultaneously).

•Multi-tasking (print, copy, and scan).

•JDF (Job Definition Format) connector compatible.

•Multiple standard and customizable workflow profiles.

•Media-based operation with PRISMA media catalog.

•PRISMAsync controller settings are accessible via a Web browser using the

Settings Editor.

•DocBox (optional) for advanced job editing.

2.4.1 PRISMAsync System Backup

To backup the PRISMAsync system settings and licenses, a technician must use

the USB key included in the PRISMAsync box.

To backup the PRISMAsync’s firmware, a technician must use a specific type of

USB stick (available for purchase), as described in “USB Stick,” on p. 21.

The USB key and USB stick are the same types of physical hardware (flash

drives); however, they are both used for different purposes.

It is strongly recommended that technicians make a backup of the system after

installation, major system changes, or upgrades on the provided USB key.

The USB key must be left with the PRISMAsync controller.

Version 7 Océ VarioPrint 135 Customer Expectations Document Page 9

2.4.2 PRISMAsync Firmware Updates

It is recommended that a technician use a specific kind of USB stick to upgrade

or restore the PRISMAsync controller firmware. The USB stick is NOT

The USB stick used for upgrading the controller firmware must adhere to specific

technical requirements. For the USB stick’s technical requirements, see

included in

the PRISMAsync box.

“USB

Stick,” on p. 21.

IMPORTANT

•Before downloading new firmware on the USB stick, the USB stick must be

formatted (all contents on the stick erased). During the firmware update

process, the current firmware on the PRISMAsync controller is erased and

replaced by the newly installed firmware. Therefore, it is highly recommended

that the technician backup the PRISMAsync system settings and licenses on

the USB key first. Then, after the firmware is updated (using the USB stick), the

installed licenses and settings can be restored using the USB key.

•Once the USB stick has been used to update firmware on the PRISMAsync

controller, it cannot be used again until the format process is repeated.

•The USB key and USB stick should not be used interchangeably.

•Using a USB stick that does not meet the specific technical requirements, may

result in an error when backing up the system settings or an error when

installing firmware.

Version 7 Océ VarioPrint 135 Customer Expectations Document Page 10

2.5 Professional Input/Output Accessories

The Océ VarioPrint 135 features many input and output accessories that allow

customers working in office environments to complete large jobs directly from the

machine. For more information on the input and output accessories that can be

attached to the machine, see “Specifications,” on p. 18.

Input Accessories

•Duplex Color Image Reader-D1 (standard)

•ePIM-C1 (external Paper Input Module) (optional)

Optional Finishing (Output) Accessories

•Document Insertion Unit-F1

•High Capacity Stacker-E1

•High Capacity Stacker-F1 (Requires PRISMAsync Firmware Version 2.4)

•Paper Folding Unit-F1

•Finisher-AF1

•Saddle Finisher-AF2

•Puncher Unit-BQ1 (Internal to the Finisher-AF1 or Saddle Finisher-AF2)

•Booklet Trimmer-D1

•Two-Knife Booklet Trimmer-A1

•SDD (Smart Dedicated Design) Square Fold Booklet-Maker with Two-Knife

Trimmer (Requires PRISMAsync Firmware Version 2.4.7 or later)

•SDD Square Fold Booklet-Maker (Requires PRISMAsync Firmware Version 2.4.7

or later)

•PowerLift

IMPORTANT

•Some type of finishing option (Finisher-AF1, Saddle Finisher-AF2, High Capacity

Stacker-E1, or High Capacity Stacker-F1) is required.

•Either the Finisher-AF1 or Saddle Finisher-AF2 can be installed. They cannot be

installed together.

•Only the Two-Knife Booklet Trimmer-A1 or SDD Square Fold Booklet-Maker with

Two-Knife Trimmer can be installed.

•The Booklet Trimmer-D1 requires the Saddle Finisher-AF2.

•The Two-Knife Booklet Trimmer-A1 requires the Booklet Trimmer-D1 and Saddle

Finisher-AF2.

•The SDD Square Fold Booklet-Maker with Two-Knife Trimmer requires the

Booklet Trimmer-D1.

•The SDD Square Fold Booklet-Maker requires the Booklet Trimmer-D1.

•The Paper Folding Unit-F1 requires the Finisher-AF1 or Saddle Finisher-AF2.

•Two High Capacity Stacker-E1s can be attached to the machine at once.

•Two High Capacity Stacker-F1s can be attached to the machine at once.

•A High Capacity Stacker-E1 cannot be installed together with a High Capacity

Stacker-F1.

•The PowerLift is used only with the High Capacity Stacker-F1.

Autres manuels pour Oce VarioPrint 135

Table des matières

Autres manuels Canon Imprimante

Canon

Canon PIXMA MX340 Series Manuel

Canon

Canon G2000 series Manuel utilisateur

Canon

Canon imagePROGRAF iPF680 Manuel utilisateur

Canon

Canon PIXMA MX340 Series Mode d’emploi

Canon

Canon imageCLASS MF5600 Series Manuel utilisateur

Canon

Canon PIXMA PRO-10 Manuel utilisateur

Canon

Canon i350 - Color Bubble Jet Printer Manuel utilisateur

Canon

Canon MG2900 Series Manuel utilisateur

Canon

Canon i860 Series Manuel

Canon

Canon LBP-1760 Manuel utilisateur

Canon

Canon Laser Shot LBP-1120 Manuel utilisateur

Canon

Canon iPF650 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon imageRUNNER C5800 Manuel utilisateur

Canon

Canon LBP-1000 Manuel utilisateur

Canon

Canon Pixma G1010 Series Manuel utilisateur

Canon

Canon PCL PRINTER KIT-Jl Manuel d'utilisation et d'entretien

Canon

Canon MP980 series Mode d’emploi

Canon

Canon iPF610 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon i475D Series Manuel utilisateur

Canon

Canon Pixma mx435 Manuel utilisateur

Canon

Canon imagePROGRAF iPF815 Guide de l'utilisateur

Canon

Canon PIXMA Pro9500 Mark II Manuel utilisateur

Canon

Canon Pixma iP4300 Series Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien