Canon LBP-1760 Manuel utilisateur
SERVICE
MANUAL
REVISION 0
COPYRIGHT 1998 CANON INC. CANON LBP-1760 REV. 0 MAY 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
RY8-1387-000
MAY 1998
LBP-1760
COPYRIGHT © 1998 CANON INC
Printed in Japan
Imprimé au Japon
Use of this manual should be
strictly supervised to avoid
disclosure of confidential
information.
Prepared by
PERIPHERAL PRODUCTS QUALITY ADVANCEMENT DIV.
PERIPHERAL PRODUCTS TECHNICAL DOCUMENTATION DEPT.
CANON INC.
5-1, Hakusan 7-chome, Toride-City, Ibaraki-Pref. 302-8501, Japan
PREFACE
This Service Manual contains basic information required for after-sales service of the laser beam
printer LBP-1760 (here after referred to as the “printer”). This information is vital to the service
technician in maintaining the high print quality and performance of the printer.
The paper feeder, envelope feeder and duplexing unit, which are prepared for the printer as
options, are described in this manual.
This manual consists of the following chapters:
Chapter 1: Product information
Features, specifications and installation
Chapter 2: Operation and Timing
A description of the operating principles and timing sequences of the electrical and
mechanical systems
Chapter 3: The Mechanical System
Explanation of mechanical operation, disassembly, reassembly and adjustment pro-
cedures
Chapter 4: Troubleshooting
Troubleshooting procedures, reference values and adjustments, maintenance and
servicing, etc.
Appendix: General timing chart, general circuit diagram, etc.
Information in this manual is subject to change as the product is improved or redesigned. All
relevant information in such cases will be supplied in the Service Information Bulletins.
A thorough understanding of this printer, based on information in this Manual and Service
Information bulletins, is required for maintaining its performance and for locating and repairing
the causes of malfunctions.
DTP system
This manual was produced on an Apple PowerMacintosh 9500/200 personal computer and output by an
Apple LaserWriter 16/600 PS laser beam printer.
All graphics were produced with Macromedia FreeHand (J), and all documents and page layouts were
created with QuarkXPress (E).
The video images were captured with SONY degital video camcorder and MASS microsystems
Quickimage 24 video capture board, and modified with Adobe Photoshop(J).
CONTENTS
CHAPTER 1 PRODUCT INFORMATION
I. FEATURES ............................. 1-1
II. SPECIFICATIONS.................... 1-3
III. SAFETY INFORMATION..... 1-6
IV. PARTS OF THE PRINTER ....... 1-7
V. INSTALLATION ....................... 1-12
VI. MAINTENANCE AND
SERVICING BY THE
CUSTOMER ............................ 1-19
VII. OPERATION............................ 1-20
CHAPTER 2 OPERATION AND TIMING
CHAPTER 3 THE MECHANICAL SYSTEM
I. BASIC OPERATION................. 2-1
A. Functions.......................... 2-1
B. Basic Operation Sequences 2-2
C. Power ON Sequence........... 2-3
II. ENGINE CONTROL SYSTEM.... 2-4
A. Engine Controller PCB....... 2-4
B. Fixing Control ................... 2-10
C. High-Voltage Power Supply
Circuit............................... 2-14
D. Low-Voltage Power Supply
Circuit............................... 2-16
E. Video Interface Control ..... 2-17
F. Other Controls .................. 2-20
III. LASER/SCANNER SYSTEM..... 2-22
A. Outline.............................. 2-22
B. Laser Control Circuit......... 2-23
C. Scanner System ................ 2-26
IV. IMAGE FORMATION SYSTEM . 2-28
A. Outline.............................. 2-28
B. Printing Process ................ 2-30
V. PICK-UP/FEED SYSTEM......... 2-38
A. Outline.............................. 2-38
B. Paper Size Detection ......... 2-40
C. Cassette Pick-up................ 2-41
D. Multi-purpose Tray
Pick-up.............................. 2-44
E. Fixing and Delivery Unit.... 2-46
F. Paper Jam Detection ......... 2-48
VI. VIDEO CONTROL SYSTEM...... 2-50
A. Video Controller Circuit .... 2-50
B. Adapter Circuit.................. 2-52
C. Operation Panel................. 2-55
D. Self Test............................ 2-56
VII. PAPER FEEDER...................... 2-58
A. Outline.............................. 2-58
B. Pick-up and Feeding.......... 2-59
C. Paper Jam Detection......... 2-62
VIII.ENVELOPE FEEDER ............... 2-63
A. Outline.............................. 2-63
B. Pick-up and Feeding.......... 2-64
C. Paper Jam Detection......... 2-67
IX. DUPLEXING UNIT ................... 2-68
A. Outline.............................. 2-68
B. Reversing and duplexing
unit Pick-up ...................... 2-70
C. Paper Jam Detection......... 2-74
I. EXTERNALS ........................... 3-1
A. External Covers................. 3-1
B. Pick-up Module.................. 3-5
C. Cooling Fan....................... 3-6
D. Operation Panel................. 3-7
II. DRIVE SYSTEM ...................... 3-8
A. Drive Unit ......................... 3-8
B. Main Motor........................ 3-9
C. Pick-up Drive Unit............. 3-10
III. PAPER TRANSPORT SYSTEM . 3-11
A. Cassette Pick-up Roller ..... 3-11
B. Cassette Feed Roller.......... 3-11
C. Separation Roller .............. 3-12
D. Multi-purpose Tray
Pick-up Roller ................... 3-12
E. Separation Pad .................. 3-13
F. Multi-purpose Tray Unit .... 3-14
G. Registration Unit............... 3-15
H. Feed Roller Unit ................ 3-17
I. Feed Guide Unit ................ 3-18
J. Delivery Unit..................... 3-18
IV. EXPOSURE SYSTEM............... 3-19
A. Laser/Scanner Unit ........... 3-19
V. ELECTROSTATIC IMAGING/
DEVELOPING/CLEANING
SYSTEM ................................. 3-20
A. EP-52 Cartridge................. 3-20
B. Transfer Charging Roller ... 3-21
VI. FIXING SYSTEM ..................... 3-23
A. Fixing Unit ........................ 3-23
VII. PRINTED CIRCUIT BOARDS ... 3-27
A. Engine Controller PCB....... 3-27
B. Paper Size Detection PCB.. 3-28
C. Video Controller PCB......... 3-29
D. Adapter PCB ...................... 3-30
VIII.PAPER FEEDER...................... 3-31
IX. ENVELOPE FEEDER ............... 3-35
X. DUPLEXING UNIT ................... 3-39
CHAPTER 4 TROUBLESHOOTING
I. PREFACE ............................... 4-1
A. Malfunction Diagnosis
Flowchart .......................... 4-1
B. Initial Check ..................... 4-4
C. Test Print.......................... 4-5
II. IMAGE DEFECTS.................... 4-10
III. PAPER JAMS
TROUBLESHOOTING .............. 4-16
IV PAPER TRANSPORT
TROUBLESHOOTING .............. 4-22
V. MALFUNCTION
TROUBLESHOOTING .............. 4-24
VI. MALFUNCTION STATUS
TROUBLESHOOTING .............. 4-25
VII. MEASUREMENT AND
ADJUSTMENT ........................ 4-34
A. Mechanical Adjustment ..... 4-34
B. Electrical Adjustment........ 4-38
C. Variable Resisters, LEDs,
Test Pins, Jumpers and
Switches on PCBs.............. 4-40
VIII.MAINTENANCE AND
SERVICING............................. 4-43
A. Periodic Replacement
Parts ................................ 4-43
B. Expected Service Life of
Consumable Parts.............. 4-43
C. Periodic Service ................ 4-43
D. Cleaning Points for
Servicing .......................... 4-44
E. Standard Tools .................. 4-46
F. Special Tools ..................... 4-47
G. Printer driver tester .......... 4-48
H. Solvents and Oil List ......... 4-55
IX. LOCATION OF ELECTRICAL
PARTS.................................... 4-56
A. Switches............................ 4-56
B. Sensors ............................. 4-58
C. Clutches/Solenoids ........... 4-60
D. Motors/Others................... 4-62
E. PCBs.................................. 4-64
F. Connectors........................ 4-66
APPENDIX
I. GENERAL TIMING CHART ...... A-1
II. GENERAL CIRCUIT DIAGRAM A-3
III. LIST OF SIGNALS................... A-5
IV. MESSAGE TABLE ................... A-11
CHAPTER 1
PRODUCT INFORMATION
I. FEATURES ............................. 1-1
II. SPECIFICATIONS.................... 1-3
III. SAFETY INFORMATION..... 1-6
IV. PARTS OF THE PRINTER ....... 1-7
V. INSTALLATION ....................... 1-12
VI. MAINTENANCE AND
SERVICING BY THE
CUSTOMER ............................ 1-19
VII. OPERATION............................ 1-20
Autres manuels pour LBP-1760
2
Table des matières
Autres manuels Canon Imprimante
Canon
Canon iP6600D - PIXMA Color Inkjet Printer Manuel utilisateur
Canon
Canon PIXMA MG6120 Series Manuel
Canon
Canon PIXMA MX432 Manuel utilisateur
Canon
Canon iP8500 - PIXMA Color Inkjet Printer Mode d’emploi
Canon
Canon Pixma iP4300 Series Instructions d'utilisation
Canon
Canon ImageRUNNER ADVANCE DX C5760i Manuel utilisateur
Canon
Canon Color imageRUNNER LBP5970 Manuel utilisateur
Canon
Canon TS3100 Series Guide de configuration
Canon
Canon PIXMA MX515 Manuel utilisateur
Canon
Canon TS705 Guide de configuration
Canon
Canon Pixma TR7660A Manuel utilisateur
Canon
Canon mg6400 series Guide de configuration
Canon
Canon LASER SHOT LBP-1210 Manuel utilisateur
Canon
Canon PIXMA TS5355a Manuel utilisateur
Canon
Canon imageCLASS LBP325dn Manuel utilisateur
Canon
Canon imagePROGRAF iPF6350 Manuel utilisateur
Canon
Canon Pixma MG3500 Series Manuel utilisateur
Canon
Canon imageCLASS LBP622Cdw Manuel utilisateur
Canon
Canon NP6320 Manuel utilisateur
Canon
Canon MX470 Manuel utilisateur
Manuels Imprimante populaires d'autres marques
Ricoh
Ricoh Aficio AP400 Manuel utilisateur
BIXOLON
BIXOLON SRP-352plusV Manuel utilisateur
Epson
Epson Stylus Photo PX700W Instructions de montage
Ricoh
Ricoh SP204SF Manuel utilisateur
Star Micronics
Star Micronics futurePRNT TSP100 Manuel utilisateur
Epson
Epson TM-TM88V-i Manuel d'utilisation et d'entretien