Canon ImagePRESS C8000VP Manuel utilisateur

Read this guide rst.

Please read this guide before operating this product.

After you ﬁnish reading the guide, store it in a safe

place for future reference.

Quick Guide

You can access

canon.com/oip-manual to read

the User’s Guide that describes

all functions of this machine.

imagePRESS C10000VP/C8000VP

Practical Features

Auto Gradation Adjustment for Various

Paper Types

The Auto Adjust Gradation function adjusts the gradation, density,

and color tone of images, and only requires you to scan the test

page. This function can be used for various weights of paper so that

a high quality print result can be obtained in different paper types.

"Adjustment for Image Quality and Finishing (Calibration)" in the

User's Guide

Achieve High Quality Color Reproduction

with Auto Color Tone Correction

Compared to the Auto Adjust Gradation function, which adjusts

CMYK, the Auto Correct Color Tone function adjusts mixed colors

that are expressed with multiple toner. By using these functions

together, you can perform the precise color adjustment.

"Adjustment for Image Quality and Finishing (Calibration)" in the

User's Guide

Optimum Print Result for Each Paper Type

Paper information, which includes the basis weight, finish, fixing, and

curl correction level, can be registered as the paper characteristics.

As the detailed information can be specified for each different paper

type, you can obtain the fine print result with considering the paper

characteristics. This function is also effective for improving paper

conveyance and print quality.

"Paper Type Management" in the User's Guide

Curl Correction for Stable Paper Conveyance

The machine constantly corrects the paper curl which occurs due

to the pressure applied when toner is fixed. Moreover, by correcting

the paper curl during outputting, the machine reduces the risk of

a paper jam, and achieves the stable paper conveyance. The curl

correction can be specified for each paper type you want to use.

"Adjustment for Image Quality and Finishing (Calibration)" in the

User's Guide

"Paper Type Management" in the User's Guide

Easy Operation for Adjusting Image Position

You can adjust the image positions easily with this machine. All you

need is measuring marks on the test page and then entering the

measured values on the touch panel display. After that, the machine

will automatically adjust the image positions. You can make the

complicated adjustment easily by entering values for each edge of

front and back sides on a single screen.

"Paper Type Management" in the User's Guide

Quick Access to Frequently Used Settings

Different settings are required, depending on the printing purpose

or paper types, but accessing setting items located in various menus

every time is a quite complicated operation. In this case, register

frequently used settings in "Settings/Registration Shortcut" button.

You can directly access to the setting screen with this button and

save the effort to search necessary setting items.

"Settings/Registration" in the User's Guide

Alternative Settings for Your Needs,

"Productivity" or "Quality"

You can set a priority to either print productivity or image quality. For

instance, select "Productivity Priority" when printing a large number

of documents to achieve speedy printing. On the other hands, select

"Quality Priority" when printing documents which contain many

pictures to obtain precisely printed images. This function can be set

for each paper type to suit your various needs for printing.

"Settings/Registration" in the User's Guide

Contents

Thank you for purchasing this Canon product. Please read this manual thoroughly before operating the machine

to familiarize yourself with its capabilities, and to make the most of its many functions. For more information on the

detailed settings for the functions, see the User's Guide. After reading this manual, store it in a safe place for future

reference.

Symbols Used in This Manual

WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not

performed correctly. To use the machine safely, always pay attention to these warnings.

CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed

correctly. To use the machine safely, always pay attention to these cautions.

IMP

RTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to

operate the machine correctly, and avoid damage to the machine or property.

TE Indicates a clarification of an operation, or contains additional explanations for a procedure.

Reading these notes is highly recommended.

OPTION Indicates an optional product which can be used with this machine.

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 6

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Maintenance and Inspections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Consumables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Safety-Related Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Parts and Their Functions. . . . . . . . . . . . . . . . . . . . . . . . . . 17

External View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Internal View (Marking Engine). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Internal View (Fixing Station). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Control Panel (Upright Control Panel-F1) OPTION . . . . . . . . .20

Status Monitor/Cancel Screen . . . . . . . . . . . . . . . . . . . . . 22

How to Turn ON the Main Power. . . . . . . . . . . . . . . . . . . 23

Turning ON the Main Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Shutting Down the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Available Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Registering Paper Types in the Paper Database. . . . . . . . . . . . . . .27

Loading Paper into the Paper Deck . . . . . . . . . . . . . . . . . . . . . . . . . .28

Selecting Paper Types from the Paper Database. . . . . . . . . . . . . .31

Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 33

Cleaning the Platen Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Cleaning the Original Scanning Area. . . . . . . . . . . . . . . . . . . . . . . . .33

Cleaning the Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Automatic Feeder Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Cleaning the Inside of the Main Unit . . . . . . . . . . . . . . . . . . . . . . . . .35

Refreshing the Fixing Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Cleaning the Touch Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Inspection of the Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Clearing Paper Jams and Staple Jams . . . . . . . . . . . . . . . . . . . . . . . .41

Reducing the Frequency of Paper Jams . . . . . . . . . . . . . . . . . . . . . .41

When an Error Message Is Displayed . . . . . . . . . . . . . . . . . . . . . . . . .42

Contacting Your Local Authorized Canon Dealer . . . . . . . . . . . . .43

If the Main Power Does Not Turn ON. . . . . . . . . . . . . . . . . . . . . . . . .44

If Memory Becomes Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Illustrations Used in This Manual

Illustrations used in this manual are those displayed

when the imagePRESS C10000VP has the following

optional equipment attached to it: the Duplex

Color Image Reader Unit-K1, Upright Control

Panel-F1, and Saddle Finisher-AN2 .

Keys and Buttons Used in This Manual

The followings are examples of how keys and

buttons are expressed in this manual.

• Touch Panel Display Keys: [Key Name]

 [Copy] [Close]

• Control Panel Keys: Key Icon (Key Name)

(Start) (Stop)

• Buttons on Computer Operation Screens: [Button

Name]

[OK], [Add], [Cancel]

Do not install the machine in locations where there

are risks of a fire or electrical shock

•

A location where the ventilation slots are blocked

(i.e. by the walls, on the soft surface such as a bed,

sofa, or rug)

• A damp or dusty location

• A location exposed to direct sunlight

• A location subject to high temperatures

• A location near open flames

• A location near alcohol, paint thinner, or other

flammable substances

Other Warnings

• Do not place jewelry and other metal objects,

or containers filled with water or liquids on the

machine. If these items come into contact with a

high-voltage area inside the machine, it may result in

a fire or electrical shock.

• Do not use the machine near any medical

equipment. Electric waves emitted from the machine

may interfere with medical equipment, which may

result in a malfunction or personal injury.

• If objects are dropped or spilled inside the machine,

immediately turn OFF the main power switch, and

disconnect the power cord from the power outlet.

Then, contact your local authorized Canon dealer.

CAUTION

Important Safety Instructions

These "Important Safety Instructions" are intended to prevent injury to user or other persons or destruction of

property. Please read these instructions thoroughly before operating the machine. Also, since it may result in

unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual. Improper

operation or use of this machine could result in personal injury and/or damage requiring extensive repair that may not

be covered under your Limited Warranty.

▀

Installation

Read the following installation precautions thoroughly to maintain a comfortable and safe working environment, in

areas of machine operation.

WARNING

Do not install the machine in unstable locations

Installing the machine in the following locations

my cause the machine to fall or tip over, resulting in

personal injury.

• An unsteady platform

• A location subject to excessive vibrations

Do not remove the leveling feet

Do not remove the machine’s leveling feet after the

machine has been installed, as this may cause the

machine to fall or tip over, resulting in personal injury.

Avoid installing the machine at high altitudes of

about 3,000 meters above sea level, or higher.

Machines with a hard disk may not operate properly

when used at high altitudes of about 3,000 meters

above sea level, or higher.

Avoid installing the machine near computers or

other precision electronic equipment.

Electrical interference and vibrations generated by

the machine while printing can adversely affect the

operation of such equipment.

Important Safety Instructions

IMP

RTANT

Do not install the machine in the following locations

• A location subject to rapid changes in temperature

and humidity

• A location near equipment that generates magnetic

waves or electromagnetic waves

• A location where chemical reactions occur, such as a

laboratory

• A location exposed to corrosive gas or toxic gas

• A location where the floor may be warped due to

the weight of the machine, such as on a carpet

Avoid poorly ventilated locations

This machine generates a slight amount of ozone

etc. during normal use. Although sensitivity to ozone

etc. may vary, this amount is not harmful. Ozone etc.

may be more noticeable during extended use or long

production runs, especially in poorly ventilated rooms.

It is recommended that the room be appropriately

ventilated, sufficient to maintain a comfortable

working environment, in areas of machine operation.

In addition, do not install this machine where it

exhausts directly onto a person.

Do not install the machine in a location where

condensation occurs

If the room where the machine is installed is heated

rapidly, or the machine is moved from a cool, dry

location to a hot, humid location, water droplets

(condensation) may form inside the machine. This

may result in paper jams, poor print quality, or a

malfunction. To prevent these problems, wait at

least two hours before using the machine in order to

adapt the machine to the ambient temperature and

humidity.

Avoid installing the machine near televisions, radios,

or similar electronic equipment.

The machine might interfere with sound and picture

signal reception. Insert the power plug into a

dedicated power outlet, and maintain as much space

as possible between the machine and other electronic

equipment.

Provide Adequate Installation Space

Provide enough space on each side of the machine for unrestricted operation.

31 1/2" (800 mm) or more

191" (4,851 mm)

73 3/8" (1,862 mm)

19 3/4"

(500 mm)

or more

19 3/4"

(500 mm)

or more

19 3/4"

(500 mm)

or more

When the Finisher-AN1, Duplex Color Image Reader Unit-K1, Upright Control Panel-F1, and POD Deck-D1 are

attached.

31 1/2" (800 mm) or more

457 3/4" (11,628 mm)

77 5/8"

(1,971 mm)

19 3/4"

(500 mm)

or more

19 3/4"

(500 mm)

or more

19 3/4"

(500 mm)

or more

When the Two-Knife Booklet Trimmer-A1, Booklet Trimmer-D1, Saddle Finisher-AN2, Paper Folding Unit-J1,

High Capacity Stacker-H1 x 2, Perfect Binder-E1, Multi Function Professional Puncher-A1, Document Insertion

Unit-N1, Duplex Color Image Reader Unit-K1, Upright Control Panel-F1, and POD Deck-D1/Secondary POD

Deck-D1 are attached.

Important Safety Instructions

IMP

RTANT

Power supply connection

• Do not connect the power cord to an uninterruptible

power source.

• If the machine is connected to the power outlet with

multiple sockets, do not use the remaining sockets

to connect other devices.

• It is recommended that the power outlet wired to an

indoor circuit breaker is used.

• When disconnecting the power cord, wait at least 5

seconds before connecting the power cord again.

Other Precautions

Electrical noise and excessive voltage drop may cause

a malfunction or loss of data in the machine and

computers.

WARNING

• Do not use power supplies with voltages other than

those specified herein, as this may result in a fire or

electrical shock.

• Do not use power cords other than the provided

power cord, as this may result in a fire or electrical

shock.

• The provided power cord is intended for use with

this machine. Do not connect the power cord to

other devices.

• Do not damage, modify, pull on, or excessively bend

the power cord. Also do not place heavy objects

on the power cord, as this could cause electrical

damage and result in a fire or electrical shock.

• Do not connect or disconnect the power plug with

wet hands, as this may result in electrical shock.

• Do not connect the power cord to a multiplug

power strip, or do not use extension cords, as this

may cause a fire or electrical shock.

• Do not bundle up or tie the power cord in a knot, as

this may result in a fire or electrical shock.

• Insert the power plug completely into the power

outlet, as failure to do so may result in a fire or

electrical shock.

• When there is thunder and lightning, disconnect the

power plug from the power outlet, as failure to do so

may result in a fire, malfunction, or electrical shock.

CAUTION

• Do not connect any unauthorized optional products

to the outlet for connecting optional products, as

this could result in a fire or smoke.

• Install this machine near the power outlet and leave

sufficient space around the power plug so that it can

be unplugged easily in an emergency.

▀

Power Supply

This machine has two power cords. Plug the machine into the following outlets.

• 208 V AC 16 A or greater (1-phase 3-wire)

• 208 V AC 24 A or greater (3-phrase 5-wire)

▀

Handling

WARNING

• If the machine makes strange noises, or gives off

smoke, heat, or strange smells, immediately turn

OFF the main power switch, and disconnect the

power cord from the power outlet. Then, contact

your local authorized Canon dealer. Continued use of

the machine in this condition may result in a fire or

electrical shock.

• Do not attempt to disassemble or modify the

machine. There are high-temperature and high-

voltage components inside the machine, and

contact with those components may result in a fire

or electrical shock.

• If you are using a cardiac pacemaker and feel

abnormalities, please move away from the product

immediately. This product emits low level magnetic

flux.

• Do not use highly flammable sprays near the

machine. If gas from these sprays comes into contact

with the electrical components inside the machine,

it may result in a fire or electrical shock.

• When moving the machine, always turn OFF the

main power switch, disconnect the power plug from

the power outlet, and then unplug the interface

cable. Otherwise, the power cord or interface cable

may be damaged, resulting in a fire or electrical

shock.

CAUTION

• Do not place heavy objects on the machine, as they

may fall or tip over, resulting in personal injury.

• For your safety, disconnect the power cord when the

machine will not be used for an extended period of

time.

• When opening and closing covers, be careful not to

get your hands caught, as this may result in personal

injury.

• Keep your hands, hair, clothing, etc. away from

the rollers in the output area, as your hand, hair, or

clothing may get caught in the rollers which may

result in personal injury.

• In order to prevent burns, do not touch the fixing

transport unit and its surroundings and output area

when using the machine, as these areas are very hot

during use. Also, be careful when handling printed

paper as it may be hot especially during continuous

printing.

• Paper that has just been output from the machine

may be hot. Be careful when removing or aligning

paper from the output tray. Touching paper right

after it is output may result in low-temperature burns.

• Do not press down the feeder forcefully when using

the platen glass to make copies of thick books.

Doing so may damage the platen glass and result in

personal injury.

• Close the feeder gently to avoid catching your hands,

as this may result in personal injury.

• Be careful not to put your hands or fingers into the

feeder. Otherwise, you may be injured.

• Be careful not to drop heavy object, such as a

dictionary, on the platen glass. Doing so may damage

the platen glass and result in personal injury.

• There are high-voltage components inside the

machine. Do not touch the labeled component and

its surroundings when removing jammed paper or

inspecting the inside of the machine, as doing so

may result in an electrical shock.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante

Canon

Canon DS700 - Selphy Compact Photo Printer Manuel utilisateur

Canon

Canon Color imageRUNNER LBP5280 Manuel utilisateur

Canon

Canon LASER SHOT LBP3500 Manuel utilisateur

Canon

Canon i70 Series Manuel utilisateur

Canon

Canon i960 Series Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE DX C7700 Series Manuel utilisateur

Canon

Canon iPF755 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon IMAGECLASS LBP6230DN Manuel utilisateur

Canon

Canon FC220 Manuel utilisateur

Canon

Canon LBP-2000 Manuel utilisateur

Canon

Canon iP4500 - PIXMA Color Inkjet Printer Manuel utilisateur

Canon

Canon iR1510 Manuel utilisateur

Canon

Canon iP3300 - PIXMA Color Inkjet Printer Manuel

Canon

Canon IB4000 series Guide de configuration

Canon

Canon imagePROGRAF W6400 Manuel utilisateur

Canon

Canon IR 2420 Instructions d'installation et d'entretien

Canon

Canon PIXMA MP230 Series Manuel utilisateur

Canon

Canon PIXMA TS9550 Guide de configuration

Canon

Canon laser Shot LBP 3300 Instructions d'installation et d'entretien

Canon

Canon PIXMA MX340 Series Manuel

Canon

Canon W8200 Manuel utilisateur

Canon

Canon i9950 Manuel utilisateur

Canon

Canon I450 - i 450 Color Inkjet Printer Manuel utilisateur

Canon

Canon IRC3580 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien

Canon imagePRESS C8000VP Manuel utilisateur

Manuels Imprimante populaires d'autres marques