Canon CLI-8 Series Manuel utilisateur

Manual

New version: Change the chip in a few seconds without any hassle.

These ink cartridges work with a chip. The chip allows the printer to recognise and regulate the ink level. The chip

from an empty ink cartridge can easily be transferred to a new ink cartridge. You can save by availing of these

cartridges as you will only need to purchase the ink cartridge with the chip once, per colour.

The 123ink compatible branded ink cartridges without a chip are not ready for use immediately. You will

first need to take the chip from the empty 123ink branded ink cartridge with a chip and move it to the

new 123ink compatible branded ink cartridge without a chip. Follow the steps below carefully.

Manual for 123ink compatible branded ink cartridges for Canon

PGI-5BK, CLI-8 series, PGI-520BK and CLI-521 series

Transferring the chip:

1. Your computer will notify you: "The ink is empty."

2. Remove the empty ink cartridge from the printer.

3. Remove the chip from the empty ink cartridge. This can be done by gently

prying the chip from the bottom right or left with a sharp knife or tweezers.

Please note: don't touch the golden contact points with your fingers!

4. With the inlet on the left, click the chip behind the attachment points on the

new ink cartridge. First at the top, then the bottom.

5. Now remove the yellow sticker on the top of the ink cartridge.

6. Only now remove the orange clip at the bottom of the ink cartridge.

7. Place the ink cartridge in the printer.

8. You will probably still get the message: ‘the ink is

empty.' on the computer.

9. Now hold down the Stop/Reset button with the

symbol for at least 5 seconds. This sets the ink level

registration feature.

10. After this, you can just print as normal. The computer will indicate for a while that the ink level is minimal.

12. The computer then reports that a refilled ink tank has been installed. Click 'Yes'.

The ink level on the computer

With the MP5XX/8XX

Stop/Reset button

With the iP4200/5200

middle button

11. Some time later (this may be a few days),

the computer will notify you: 'the remaining

ink level cannot be determined.' Click "OK."

13. Some time later (this may be a few days),

the computer will notify you: 'the remaining

ink level cannot be determined.' Click "OK."

14. Finally, the computer will notify you that

you must hold down the "RESUME" button

for at least 5 seconds.

15. Now hold down the button with the

symbol for at least 5 seconds. After this,

you will no longer receive any error

messages on this chip.

Please note:

• The chips are type and colour sensitive. So always use the chip only for an ink cartridge of the same type

and colour.

• If you change multiple colours at once, do so colour by colour to avoid swapping.

• Replace the chip carefully, without damaging it.

• Because the chip cannot be reset, the computer and printer do not indicate how much ink is still present in

the ink cartridge. From time to time, we recommend manually checking that there is still enough ink in the

ink cartridge so that the print head does not damage.

• If one or more colours are lost when printing, the ink cartridge in question is in need of replacement.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante

Canon

Canon PowerShot S300 Digital Elph Manuel utilisateur

Canon

Canon imagePROGRAF iPF9400S Manuel utilisateur

Canon

Canon S1 imagePASS Series Guide de référence

Canon

Canon iR1018 Manuel utilisateur

Canon

Canon S630 Manuel utilisateur

Canon

Canon S200SP Manuel utilisateur

Canon

Canon LBP654C Series Manuel utilisateur

Canon

Canon GX5050 Guide de configuration

Canon

Canon iP6310D - PIXMA Color Inkjet Printer Manuel

Canon

Canon FAX-L170 Guide de sécurité

Canon

Canon MB2300 series Guide de configuration

Canon

Canon PIXMA G6070 Guide de configuration

Canon

Canon SELPHY CP790 Manuel utilisateur

Canon

Canon iP100 - PIXMA Color Inkjet Printer Manuel

Canon

Canon iP100 - PIXMA Color Inkjet Printer Manuel d'utilisation et d'entretien

Canon

Canon TS8100 Series Guide de configuration

Canon

Canon imageCLASS MF5950dw Instructions de montage

Canon

Canon Pixma iP4300 Series Instructions d'utilisation

Canon

Canon 3433B010 Guide de l'utilisateur

Canon

Canon IMAGERUNNER ADVANCE C5051 Manuel utilisateur

Canon

Canon PIXMA TS6020 Manuel utilisateur

Canon

Canon TS6420 Guide de configuration

Canon

Canon MP282 Manuel utilisateur

Canon

Canon iP90 - PIXMA Color Inkjet Printer Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien