Canon BJC-S800 Manuel utilisateur
S800 Setup Instructions
Step 1: Unpack The Printer
1. Carefully remove all items from the box.
Step 2: Prepare the Printer
1. Remove the spacers and shipping tape from the inside and outside of the printer.
2. Plug the power cord into the back of the printer and connect the other end to a
power outlet.
3. Press the POWER button.
4. Open the front cover. The printhead holder automatically moves to the center.
Remove the protective tape.
5. Write down the serial number located to the left of the printhead. You will need
this later to register the product.
Step 3: Install the Printhead
1. Remove the printhead from its package.
2. Turn the printhead over, then remove the orange protective cap.
NOTE: Do not touch the electrical contacts.
3. Raise the blue lock lever.
4. Gently set the printhead into the holder. The printhead will rest at a slight angle.
Do not press it down.
Lower the blue lock lever and gently press it down until you hear it lock into place.
Step 4: Install the Ink Tanks
1. Pull the orange tab off the yellow ink tank (BCI-6Y), then remove and discard the
plastic wrapper.
2. Twist off and discard the orange protective cap.
NOTE: To avoid spilling ink, never press on the sides of an ink tank.
3. Insert the ink tank into the correct slot. (Refer to the color guide on the blue
lever.)
Press down gently until you hear the ink tank lock into place.
4. Insert the remaining five ink tanks into their assigned slots.
5. Close the front cover and extend the paper guides.
The printer will begin cleaning the printhead.
Step 5: Connect the Printer to Your Computer
For USB Cables
1. Turn the printer off.
IMPORTANT: Be sure printer is off before continuing, or the computer will attempt
to install the printer driver before the printer is ready.
2. Connect one end of the USB cable to the computer, the other end to the printer.
For Parallel Cables
1. Turn the printer off.
IMPORTANT: Be sure printer is off before continuing, or the computer will attempt
to install the printer driver before the printer is ready.
2. Connect one end of the parallel cable to the computer, the other end to the
printer.
Step 6: Install the Printer Driver - Choose
Installation A(Windows®) or B(Macintosh®)
Installation A: Windows®
1. Be sure printer is off before continuing
NOTE: For Windows 2000 or Windows NT 4.0, log on to Windows as a member of
the [Administrators] group before continuing.
2. Insert the S800 Setup Software & Reference Guide CD-ROM. The setup program
should run automatically.
IMPORTANT: If you see this screen. click Cancel and continue.
NOTE:
oIf the setup program does not run, click Start, then Run, the type
x:setup.exe where x is your CD-ROM drive.
oIf prompted, select a language and click OK.
3. Read the Welcome screen, then click Next.
4. Read the License Agreement, then click Yes.
5. When the main menu appears, click Install Software.
NOTE: If you are prompted to restart Windows, remove the CD-ROM, then click OK.
After the computer restarts, insert the CD-ROM and continue.
6. Select Printer Driver, then click Start.
The printer driver will load automatically.
7. When prompted, turn the printer on so the printer port (connection) can be
automatically detected.
8. The software will begin identifying the printer port being used. Click OK to accept
the printer port.
IMPORTANT: If your computer cannot detect a printer port, refer to the
Troubleshooting chapter in the S800 User's Guide for instructions.
9. Click Yes if you are prompted to restart the computer. When installation and
registration process has completed, click Exit.
NOTE: Remember to register your product to ensure product support.
10. Continue with step 7 Align the Printhead.
Installation B: Macintosh®
1. Prepare your Mac® (if needed).
• If you have an iMac® with OS 8.1, install the iMac update 1.0 from
www.apple.com.
• If you have multiple users set up in OS 9, log in as the Owner.
2. Close any open software applications.
3. Insert the S800 Setup Software & Reference Guide CD-ROM.
4. Open the printer driver folder on the CD-ROM, then select the desired language.
5. Double click the Installer icon.
6. Read the License Agreement, then click Accept.
7. Click Install.
The printer driver will load automatically.
NOTE: If a "No other applications can be running..." message displays, click
Continue.
8. When the installation and registration process has completed, click Restart.
NOTE: Remember to register your product to ensure product support.
9. After the computer restarts, select the Apple menu, then Chooser.
10. Click the S800 icon in the chooser.
NOTE: To use the BJ Print Monitor, click the Background button to the On position.
11. Close the Chooser
10. Continue with step 7 Align the Printhead.
Step 7: Align the Printhead
1. Add a sheet of blank paper in the sheet feeder
2. Start the alignment procedure.
Windows:
a. Click Start, then Settings, then Printers.
b. Right-click the Canon S800 icon, then click Properties.
c. Click the Maintenance tab, then click the Print Head Alignment icon.
Macintosh:
a. From the File menu in a software application, click Page Setup.
b. Click the Utilities button.
c. Click the down-arrow to select Test Print.
d. Click the Print Head Alignment icon.
3. Click the OK when prompted to print an alignment test page.
Windows users: When prompted if the pattern printed successfully, click Yes.
4. Compare the different patterns for each color on the printout:
5. For each color on the test printout, enter the number in the Print Head Alignment
window that corresponds with the smoothest looking test pattern.
6. Click OK(Windows) or Send(Macintosh) when finished
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Canon Imprimante
Canon
Canon imageRUNNER 2745i Manuel utilisateur
Canon
Canon imagePROGRAF W7200 Manuel utilisateur
Canon
Canon PIXMA MX416 Manuel utilisateur
Canon
Canon imagePRESS C1+ Fiche d'information produit
Canon
Canon i 320 Manuel utilisateur
Canon
Canon PIXMA G3260 Guide de configuration
Canon
Canon PIXMA MX512 Manuel de la liste des pièces
Canon
Canon 1238P Manuel utilisateur
Canon
Canon Color Bubble Jet BJC-2000 Series Manuel utilisateur
Canon
Canon TS3440 Guide de configuration
Canon
Canon LBP-3260 Mode d’emploi
Canon
Canon imageprograf IPF785 Manuel utilisateur
Canon
Canon PIXMA E300 series Manuel utilisateur
Canon
Canon PIXMA MG6320 Manuel utilisateur
Canon
Canon Pixma MG2450 Manuel utilisateur
Canon
Canon MP490 series Manuel utilisateur
Canon
Canon iP4600 - PIXMA Color Inkjet Printer Manuel utilisateur
Canon
Canon imageFORMULA DR-G2140 Manuel utilisateur
Canon
Canon Color imageRUNNER LBP5360 Manuel utilisateur
Canon
Canon image CLASS Manuel utilisateur
Manuels Imprimante populaires d'autres marques
Ricoh
Ricoh Aficio AP400 Manuel utilisateur
BIXOLON
BIXOLON SRP-352plusV Manuel utilisateur
Epson
Epson Stylus Photo PX700W Instructions de montage
Ricoh
Ricoh SP204SF Manuel utilisateur
Star Micronics
Star Micronics futurePRNT TSP100 Manuel utilisateur
Epson
Epson TM-TM88V-i Manuel d'utilisation et d'entretien