Canon FPD-400D Manuel utilisateur

ご使用の前に必ずこの取扱説明書をお読みください。

なお、取扱説明書は必要に応じてご覧になれるように大切に保管してください。

Read this operation manual before using the product.

Keep the manual in place for future reference.

在使⽤本产品之前 ,请务必先仔细阅读本使⽤说明书。

请务必妥善保管好本书 ,以便⽇后能随时查阅。

请在充分理解内容的基础上 ,正确使⽤。

取扱説明書

OPERATION MANUAL

使⽤说明书

J/E/C

LENS ACCESSORY

镜头配件

FPD-400D

FOCUS DEMAND

电动聚焦控制器

FPM-420D

FOCUS POSITIONAL SERVO MODULE

电动聚焦位置伺服模块

FPD-400DFPM-420DJ-0819.inddi 2010/08/2016:06:19

ENGLISH VERSION

FPD-400DFPM-420DE-0819.inddi 2010/08/2016:08:48

FCC REGULATIONS

This device complies with Part 15B of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to Part 15B of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

Do not make any changes or modifications to the equipment unless

otherwise specified in the manual. If such changes or modifications

should be made, you could be required to stop operation of the equipment.

Canadian Radio Interference Regulations

This Class A digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du

Règlement sur le matériel brouilleur du Canada.

We, Canon Inc., in Japan and Canon Europa N. V., in The Netherlands,

conﬁrm that the BCTV zoom lens accessory is conformity with the essential

requirements of EC Directive(s) by applying the following standards:

EN55103-1, and EN55103-2

Note:

a) Applicable Electromagnetic Environments:

E1 (residential), E2 (commercial and light industrial),

E3 (urban outdoors) and E4 (controlled EMC environment, ex. TV

studio).

b) Use of shielded cable is required to comply with limits speciﬁed by

above standards.

Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts- und

Gewerbebereich sowie in Kleinbetrieben vorgesehen.

FPD-400DFPM-420DE-0819.inddii 2010/08/2016:09:00

- 17 -

INTRODUCTION

Thank you for purchasing Canon’s TV Zoom Lens Accessories. These

instructions explain the functions and operation of these accessories, and they

outline the precautions to be heeded during the unit’s operation. Before use,

please read through and familiarize yourself with the instructions, and then keep

them in a safe place for future reference.

GENERAL DESCRIPTION

These accessories are used to perform remote focus operations.

FPD-400DFPM-420DE-0819.indd17 2010/08/2016:09:00

- 19 -

CONTENTS

GENERAL SAFETY INFORMATION ....................... 20

§1. CONFIGURATION........................................................ 25

§2. MOUNTING and CONNECTING.................................. 26

2-1. For digital “R” type and “R” type lenses only.....................26

2-2. For digital “A” type and “A” type lenses only .....................29

§3. OPERATION................................................................. 31

TECHNICAL DOCUMENTS: EXTERNAL VIEW AND

GENERAL CIRCUIT

DIAGRAM............................ 51

INDEX ................................................................................ 56

- MAJOR LENS TYPES EXPLAINED IN THIS MANUAL -

The classifications for the lens types explained in this manual are shown

below.

The “R” type lenses require conversion cable CC-1220, and the “A” type

lenses require conversion cable CC-0620 (both sold separately).

Type digital “R” Type digital “A”

Lens models

Type “R” Type “A”

KRSD

IRSD

WRSD

VRSD

KASD

IASD

WASD

VASD

KRS

IRS

WRS

VRS

KAS

IAS

WAS

VAS

FPD-400DFPM-420DE-0819.indd19 2010/08/2016:09:00

- 20 -

GENERAL SAFETY INFORMATION

The safety warnings and cautions provided on the product or in this operation

manual must be observed. Failure to observe warnings and cautions provided to

guard against hazards may result in injury or accident.

Read this operation manual carefully to familiarize yourself with its contents and

ensure that you can operate the product properly.

Also, store this manual in a safe place where it can easily be referenced

whenever required.

This operation manual uses the following symbols and terms to identify hazards

to protect you and others by aiming to prevent the occurrence of accidents.

WARNING

Indicates hazardous situations which, if not heeded,

may result in death or serious injury to you or other

persons.

CAUTION

Indicates hazardous situations which, if not heeded,

may result in minor or moderate injury to you or other

persons, or damages to your property.

(NOTE)

Emphasizes essential information which, if not

heeded, may render the product unworkable or cause

it to function improperly.

Also, provides helpful information for you operation.

FPD-400DFPM-420DE-0819.indd20 2010/08/2016:09:01

- 21 -

HANDLING THE PRODUCT

CAUTION

1. Do not drop the product when transporting it or when attaching or detaching

it to or from the camera head.

The product may fall, possibly causing injury.

2. Make sure all mountings a tightened securely. If any of these mountings

becomes loose, the product may fall, possibly causing injury.

3. Inspect all mountings periodically (about every 6 months to 1 year) to make

sure they are securely tightened, and tighten any loose portions.

Otherwise, the product may fall, possibly causing injury.

4. If it becomes necessary to repair this product, or to perform any operations

or adjustments not mentioned in this operation manual, contact Canon’s

representative or the dealer who originally supplied the lens.

(NOTE)

1. Protect the product from strong impacts of shocks. Striking or dropping the

lens may result in a malfunction.

2. This product is not completely waterproof, so avoid exposing it directly to

rain or snow.

When the product must be used in rain or snow, provisions should be made

to prevent the product from getting wet.

3. If the product is to be used in adverse environments, such as in a chemical

laden atmosphere, consult with Canon’s representative beforehand.

FPD-400DFPM-420DE-0819.indd21 2010/08/2016:09:01

- 22 -

DEALING WITH ABNORMALITIES

WARNING

1. Should any of the abnormalities described below occur, immediately unplug

the lens cable from the camera, and then contact Canon’s representative

or the dealer from whom you purchased the product.

• Smoke, unusual smells or unusual noise

• Entry of foreign objects (metals, liquids, etc.) inside the product

MAINTENANCE AND INSPECTION

WARNING

1. Unplug the lens cable and remove the lens from the camera, before

attempting to clean the lens.

Never use ﬂammable substances such as benzene or thinner for cleaning,

as this may present a serious ﬁre or electric shock hazard.

(NOTE)

1. Periodic inspection

A periodic inspection about once a year is recommended.

The inspection and maintenance interval depends on the operating

conditions, the frequency of use, and the environment. If required, overhaul

the lens.

STORAGE

(NOTE)

1. Moisture inside the product

If the product becomes damp because of use in fog, mist or drizzle, wipe

off the moisture with a soft dry cloth and seal the product together with an

efﬁcient desiccant in a vinyl bag to remove moisture which has entered into

the interior.

FPD-400DFPM-420DE-0819.indd22 2010/08/2016:09:01

- 23 -

TO THE CUSTOMER

1. Canon shall bear no responsibility for damage resulting from improper

operation of this product by the customer.

2. Canon shall make no guarantees about the product quality, functions, or

operation manual and its marketability and suitability for the customer's

purpose.

3. Canon shall make no guarantees about the results obtained using this

product.

4. The product specifications, configuration, and appearance are subject to

change without prior notice.

5. For further information on repairs, maintenance, or adjustments not

mentioned in this operational manual, contact your Canon dealer or your

Canon sales representative.

6. Note that Canon may be unable to undertake servicing or repair of a product

if it is modiﬁed without consulting Canon or your Canon sales representative.

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

CANON EUROPA N.V.

Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands

copied in any form or by any means without the written permission of Canon Inc.

FPD-400DFPM-420DE-0819.indd23 2010/08/2016:09:01

- 25 -

§1. CONFIGURATION

Make sure all of the following items are included in the packing box.

(If you find any item missing, please contact the dealer from whom you

purchased this product.)

(NOTE) : This operation manual describes the operation of both the

servo focus demand and focus positional servo module.

The focus positional servo module is required when the

servo focus demand is used with the digital “R” type and

“R” type lenses. (The focus positional servo module is not

necessary with the digital “A” type and “A” type lenses

since a focus servo module is already built in.) Note that

the focus characteristics curve selection function cannot

be used with the built-in focus module of the “A” type

lenses. Also, the product components below are grouped

according to the respective mechanism. If you find any

components missing, please contact the store where you

purchased the product.

FPD-400D product components

UNIT Q'TY

SERVO FOCUS DEMAND <FPD-400D>................................ 1

CLAMPER <CR-10>................................................................ 1

OPERATION MANUAL............................................................ 1

FPM-420D product components

UNIT Q’TY

FOCUS POSITIONAL SERVO MODULE <FPM-420D> ......... 1

OPERATION MANUAL............................................................ 1

(NOTE): Storing environment

Check the following points, and make sure the place where

the lens is stored satisﬁes the following conditions.

1. Store the lens only under the following ambient conditions.

Ambient temperature : -30°C to +60°C

Ambient humidity : up to 60%RH (no condensation)

2. Do not subject the product to strong physical shock or

vibration.

FPD-400DFPM-420DE-0819.indd25 2010/08/2016:09:01

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Lentille

Canon

Canon CN7x17 Manuel utilisateur

Canon

Canon RF 24-105mm F2.8 L IS USM Z Manuel utilisateur

Canon

Canon CN-E18-80mm Manuel utilisateur

Canon

Canon EF 16-35mm f/2.8L II USM Manuel utilisateur

Canon

Canon RF 85mm F1.2 L USM DS Manuel utilisateur

Canon

Canon EF200 mm Manuel utilisateur

Canon

Canon EF28-135mm f/3.5-5.6 IS USM Manuel utilisateur

Canon

Canon RF15-35mm F2.8 L IS USM Manuel utilisateur

Canon

Canon FL-F 300MMF/5 Manuel utilisateur

Canon

Canon EF100mm f/2 USM Manuel utilisateur

Canon

Canon EF135 mm Manuel utilisateur

Canon

Canon EF 35-80mm f/4-5.6 III Manuel utilisateur

Canon

Canon imageBrowser 5.5 Manuel utilisateur

Canon

Canon 25 mm f:3.5 Manuel utilisateur

Canon

Canon HJ40E Manuel utilisateur

Canon

Canon EF24-105MM Manuel utilisateur

Canon

Canon CN20x50 Series Manuel utilisateur

Canon

Canon KT20x5B KRSD Manuel utilisateur

Canon

Canon HD XS HJ15ex8.5B Manuel utilisateur

Canon

Canon CN-E18-80mm T4.4 L IS KAS S Manuel utilisateur

Canon

Canon EF 100-400mm f/4.5-5.6L IS USM Manuel utilisateur

Canon

Canon CN-E20-50mm T2.4 L F Manuel utilisateur

Canon

Canon RF 50mm F1.2 L USM Manuel utilisateur

Canon

Canon A 6000 ILCE-6000 Manuel utilisateur

Manuels Lentille populaires d'autres marques

Panasonic

Panasonic Lumix H-ES12060 Guide d'installation

Navitar

Navitar 1-62314 Mode d’emploi

Angenieux

Angenieux OPTIMO PRIME Manuel utilisateur

Sealife

Sealife SL050 Manuel utilisateur

Navitar

Navitar 1-51200 Mode d’emploi

MeCan

MeCan NY1S-a5100 Manuel utilisateur

Tamron

Tamron SP 70-300mm F/4-56 Di VC USD Manuel utilisateur

FujiFilm

FujiFilm FUJINON ZA17x7.6BERD-S6 Manuel utilisateur

Panasonic

Panasonic VW-W4907 Manuel utilisateur

Navitar

Navitar 1-51332 Mode d’emploi

Leica

Leica APO-SUMMICRON-SL 1:2/50 ASPH. Manuel utilisateur

Sony

Sony LKRL-Z200 Series Manuel utilisateur

Cosina

Cosina Voigtländer SUPER NOKTON 29mm F0.8... Manuel utilisateur

Arax

Arax PCS ARSAT H(K) 4.5/55 Manuel utilisateur

Cosina

Cosina Voigtländer NOKTON Manuel utilisateur

Cosina

Cosina Voigtländer NOKTON Manuel utilisateur

Navitar

Navitar 1-51338 Mode d’emploi

Shamir

Shamir Star Guide de configuration