Canon PowerShot SX730 HS Manuel utilisateur
CEL-SX1HA210
ENGLISH
Getting Started
2
Package Contents
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-13L*1
Battery Charger
CB-2LHE
Wrist Strap*2
*1 Do not peel off the adhesive covering from a battery pack.
*2 For attachment instructions, refer to the Camera User Guide that can be downloaded
from the Canon website.
• Printed matter is also included.
• A memory card is not included.
Compatible Memory Cards
No memory card is included. Purchase one of the following kinds of card
as needed. These memory cards can be used, regardless of capacity. For
details on the number of shots and recording time per memory card, see
“Specifi cations” in the downloadable Camera User Guide.
• SD memory cards*1
• SDHC memory cards*1*2
• SDXC memory cards*1*2
*1 Cards conforming to SD standards. However, not all memory cards have been
verifi ed to work with the camera.
*2 UHS-I memory cards are also supported.
3
Manuals and Software
Manuals and Software
You can download the manuals and software from the following
URL.
http://www.canon.com/icpd/
•With a computer connected to the Internet, access the above URL.
•Access the site for your country or region.
•Adobe Reader is required to view the manuals.
•You can also download software from the above URL. For instructions on
downloading and installing the software, refer to the Camera User Guide
available for download.
•You may be requested to enter the serial
number (body number) when downloading the
manuals or software.
In this case, enter the number on the camera
body, behind the screen (monitor).
Initial Preparations
Initial Preparations
1 Attach the strap.
Thread the end of the strap through the
strap mount (1), and then pull the other
end of the strap through the loop on the
threaded end (2).
2 Insert the battery pack.
After aligning the marks on the battery
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
(1)
(2)
(1)
(2)
4
Initial Preparations
3 Charge the battery pack.
Plug the power cord into the charger, then
plug the other end into a power outlet.
The charging lamp turns orange, and
charging begins.
When charging is fi nished, the lamp turns
green. Remove the battery pack.
For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to “Specifi cations” in the
downloadable Camera User Guide.
4 Open the cover.
Slide the switch (1) and open the cover
(2).
5 Insert the battery pack.
Holding the battery pack with the terminals
in the position shown, hold the battery
lock toward (1) and insert the battery pack
toward (2) until the lock clicks shut.
If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confi rm that the
battery pack is facing the right way and
locks when inserted.
To remove the battery pack, press the
battery lock in the direction of the arrow.
(2)
(1)
(1)
(2)
5
Initial Preparations
6
Check your card’s write-protect
switch and insert the memory card.
Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Move the
switch toward (1).
Insert the memory card with the label (2)
facing as shown until it clicks into place.
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
7 Close the cover.
Lower the cover (1) and hold it down as
you slide the switch, until it clicks into the
closed position (2).
If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.
8 Turn the camera on.
Press the ON/OFF button.
The [Date/Time] screen is displayed.
9 Set the date and time.
Press the [ ][ ] buttons to choose an
option.
Press the [ ][ ] buttons or turn the [ ]
dial to specify the date and time.
When fi nished, press the [ ] button.
(2)
(1)
(1)
(2)
6
Initial Preparations
10
Specify your home time zone.
Press the [ ][ ] buttons to choose your
home time zone.
Press the [ ] button when fi nished.
After a confi rmation message, the setting
screen is no longer displayed.
To turn off the camera, press the ON/OFF
button.
11
Confi gure the display language.
Press the [ ] button.
Press and hold the [ ] button, and then
immediately press the [ ] button.
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose a language, and
then press the [ ] button.
Changing the Date and Time
• To adjust the date and time once you have set it, fi rst press the
[ ] button and move the zoom lever to choose the [ ] tab. Choose
[Date/Time] (either press the [ ][ ] buttons or turn the [ ] dial), press
the [ ] button, set the date and time as described in step 9, and then
press the [ ] button.
7
Trying the Camera Out
Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specifi c scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on and enter
[] mode.
Press the ON/OFF button.
Set the mode dial to [ ].
2 Compose the shot.
To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto) as
you watch the screen, and to zoom away
from the subject, move it toward [ ]
(wide angle).
3 Shoot.
Shooting Still Images
Press the shutter button lightly (1).
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down (2).
If [Raise the fl ash] is displayed, move
the [ ] switch to raise the fl ash. It will fi re
when shooting. If you prefer not to use
the fl ash, push it down with your fi nger,
into the camera.
8
Trying the Camera Out
Recording Movies
Press the movie button to start recording,
and press it again to stop.
Viewing
1 Enter Playback mode.
Press the [ ] button.
2 Choose images.
To view the previous or next image, press
the [ ][ ] buttons or turn the [ ] dial.
Movies are identifi ed by a [ ] icon.
To play movies, go to step 3.
3 Play movies.
Press the [ ] button, choose [ ] (either
press the [ ][ ] buttons or turn the
[] dial), and then press the [ ] button
again.
Playback now begins, and after the movie
is fi nished, [ ] is displayed.
To adjust the volume, press the [ ][ ]
buttons during playback.
Erasing Images
To erase the image you chose in step 2, do the following. Note that erased
images cannot be recovered.
1 Press the [ ] button.
2 After [Erase?] is displayed, press the [ ][ ] buttons or turn the [ ] dial
to choose [Erase], and then press the [ ] button.
9
Trademarks and Licensing
• Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
• App Store, iPhone, and iPad are trademarks of Apple Inc.
• The SDXC logo is a trademark of SD-3C, LLC.
• HDMI, the HDMI logo and High-Defi nition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
• Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™
are trademarks or registered trademarks of the Wi-Fi Alliance.
• The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under
license. Other trademarks and trade names are those of their respective
owners.
• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in
the United States and in other countries.
• All other trademarks are the property of their respective owners.
• This device incorporates exFAT technology licensed from Microsoft.
• This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and
non-commercial purpose or (2) by a video provider licensed under the
AT&T patents to provide MPEG-4 compliant video. No license is granted
or implied for any other use for MPEG-4 standard.
Disclaimer
• Unauthorized reproduction of this guide is prohibited.
• All measurements based on Canon testing standards.
• Information subject to change without notice, as are product
specifi cations and appearance.
• Illustrations and screenshots in this guide may diff er slightly from the
actual equipment.
• The above items notwithstanding, Canon cannot be held liable for any
loss arising from the use of this product.
10
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
These symbols indicate that this product is not to be disposed of
with your household waste, according to the WEEE Directive
(2012/19/EU), the Battery Directive (2006/66/EC) and/or national
legislation implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above,
in accordance with the Battery Directive, this indicates that a heavy
metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in
this battery or accumulator at a concentration above an applicable
threshold specifi ed in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an authorized
one-for-one basis when you buy a new similar product or to an authorized collection site for
recycling waste electrical and electronic equipment (EEE) and batteries and accumulators.
Improper handling of this type of waste could have a possible impact on the environment and
human health due to potentially hazardous substances that are generally associated with EEE.
Your cooperation in the correct disposal of this product will contribute to the eff ective usage of
natural resources.
For more information about the recycling of this product, please contact your local city offi ce,
waste authority, approved scheme or your household waste disposal service or visit
www.canon-europe.com/weee, or www.canon-europe.com/battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
To ensure proper operation of this product, use of genuine Canon accessories is recommended.
- Interface Cable IFC-600PCU
HDMI cable (camera end: Type D): Use a commercially available cable no longer than 2.5 m.
Graphical symbols placed on the equipment
Class II equipment
Direct current
Autres manuels pour PowerShot SX730 HS
1
Table des matières
Autres manuels Canon Appareil photo numérique
Canon
Canon PowerShot SD750 User Guide Advanced Manuel utilisateur
Canon
Canon EOS 1Ds Mark III Guide de référence rapide
Canon
Canon POWERSHOT A630 Manuel utilisateur
Canon
Canon PowerShot G12 Manuel utilisateur
Canon
Canon PowerShot D10 Manuel utilisateur
Canon
Canon EOS 60D Manuel utilisateur
Canon
Canon Auto Zoom 814 Manuel utilisateur
Canon
Canon 2663B001 Manuel utilisateur
Canon
Canon PowerShot ELPH 500 HS Manuel utilisateur
Canon
Canon PowerShot SX230 HS Manuel utilisateur
Canon
Canon EOS 100D Manuel utilisateur
Canon
Canon VI-T Manuel utilisateur
Canon
Canon EOS REBEL T6 (W) Guide d'installation
Canon
Canon EOS M6 Mark II Manuel utilisateur
Canon
Canon EOS 1N Manuel utilisateur
Canon
Canon EOD 50D Manuel utilisateur
Canon
Canon PowerShot A40 Manuel utilisateur
Canon
Canon PowerShot S200 Manuel utilisateur
Canon
Canon EOS 700D Manuel utilisateur
Canon
Canon Ixus 285 HS Manuel utilisateur
