Canon EOS Series Mode d’emploi

Table des matières

Autres manuels Canon Appareil photo numérique

Canon

Canon Sure shot 80 tele Manuel utilisateur

Canon

Canon EOS 6D Guide d'installation

Canon

Canon PowerShot SX50 HS Manuel utilisateur

Canon

Canon PowerShot S1 IS Mode d’emploi

Canon

Canon Digital Elph SD500 Manuel utilisateur

Canon

Canon EOS 1500D Rebel T7 Manuel utilisateur

Canon

Canon PowerShot G1 X Manuel utilisateur

Canon

Canon EOS-1D Mark IV Manuel utilisateur

Canon

Canon SD550 - PowerShot Digital ELPH Camera Manuel utilisateur

Canon

Canon PowerShot SX500 IS Manuel utilisateur

Canon

Canon Iwy Cliq+ Manuel utilisateur

Canon

Canon PowerShot A430 Manuel utilisateur

Canon

Canon PowerShot N2 Manuel utilisateur

Canon

Canon PowerShot SXE60 HS Manuel utilisateur

Canon

Canon EOS DIGITAL REBEL XTi Manuel utilisateur

Canon

Canon PowerShot SX10 IS Manuel utilisateur

Canon

Canon PowerShot G6 Mode d’emploi

Canon

Canon Digital IXUS 990 IS Manuel utilisateur

Canon

Canon EOS-1D Instructions de montage

Canon

Canon POWERSHOT PRO 1 Manuel utilisateur

Canon

Canon CR-2 AF Manuel utilisateur

Canon

Canon WP-DC27 Manuel utilisateur

Canon

Canon Digital Camera Solution Disk Version 22 Manuel utilisateur

Canon

Canon POWERSHOT SX40HS Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Nikon

Nikon Coolpix 100 Manuel utilisateur

1

© 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.

EOS

Step-by-Step Setup Guide

Wireless File TransmiTTer

linked shoT mode

2

EOS Wireless File Transmitter

Linked Shot Setup

Master Camera Initial Setup

Overview

In Linked Shot mode one EOS WFT-equipped

camera is set up as the master with the remaining

WFT-equipped cameras set up as slaves. You can

connect up to 10 slaves. The master can trigger the

slaves simultaneously or with intervals and/or de-

lays based on your preference and camera settings.

No other equipment or software is necessary.

1Turn on the camera with WFT unit attached.

Note that the WFT requires its own battery.

Press the MENU button on the camera, then

navigate to the Tool menu that lists WFT set-

tings. Select [WFT settings].

2Under WFT settings, elect [Connection wizard].

3Under Select communication method, select

[LinkedShot]. Select [OK].

3

4Under Linked Shooting settings, select [Mas-

ter]. Select [OK].

5You should see the [Busy...] screen at right.

Leave the master camera set to this screen

while you continue to set up the slaves as

described below.

Slave Camera Setup

1Turn on the camera with the WFT unit attached.

(The WFT requires its own battery.) Navigate to

the Tool menu that contains the WFT settings

menu. Select [WFT Settings].

2Under WFT settings, select [Connection wiz-

ard].

4

4Under Linked Shooting settings, select [Slave].

Select [OK].

3Under Select communication method, select

[LinkedShot]. Select [OK].

1The Linked Shooting settings screen on the

master camera should look like the screen at

right. The number you see will depend on how

many slaves you have correctly set up.

Select [OK] to connect to the slave(s).

5You should see the screen at right.

Select [OK] to connect to the master camera.

Repeat this ve-step procedure for each

additional slave you wish to link.

Master Camera Final Setup

5

2Each of the cameras will conrm their

connection. Masters will conrm that they are

connected to the slave(s).

Select [OK] to conrm and exit the menu.

Slaves will conrm that they are

connected to the master camera.

Select [OK] to conrm and exit the menu.

When you have nished using Linked Shot

mode, return to the WFT settings menu to select

[Disconnect.]

How to Disconnect

To reconnect:

1. Begin with the same cameras you originally

set-up.

2. Set the master camera from [Disconnect] to

[LinkedShot].

3. Set all slaved cameras from [Disconnect] to

[LinkedShot].

How to Reconnect

© 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.