Canon PIXMA MG5420 Manuel utilisateur

PIXMA MG5400

Setup Guide

series

Setup Guide

This guide provides information for setting up a network connection for the printer.

Network Connection

Wireless Connection

Preparation for Connection

Printer Setup

Setup Procedure Selection

Push Button Method

Standard setup

WPS

Other setup (Advanced setup)

Disable

WEP

WPA/WPA2

Character Entry

Troubleshooting

Network Connection

Wireless Connection

aPreparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the POWER lamp (A) will be lit.

Notes on Wireless Connection

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to.

The con guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

Check if your device supports IEEE802.11n, 802.11g or 802.11b.

If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11 n only."

For of ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

bPrinter Setup

1. Press the HOME button (A) on the printer.

•

2. Use the or button (A) to display the WLAN setup icon.

3. Press the left Function button (B).

The (blue) Wi-Fi lamp (C) lights up when wireless connection is enabled.

cSetup Procedure Selection

The printer will automatically search for access points supporting WPS (Wi-Fi Protected Setup).

* If the Push Button Method screen is displayed on the printer

When you are unsure if your access point or router supports this technology, press the Stop button.

Proceed to the screen for Standard setup.

Push Button Method → d-A Select the most suitable connection method from the following.

Standard setup → d-B

Connect to Access Point by entering the Network Password

WPS → d-C

Connect to WPS-compatible Access Point

Other setup (Advanced setup) → d-D

Connecting to the Network by Entering the Access Point's Settings

Directly on the Printer

When using WEP key number 2, 3 or 4, select "Advanced setup".

•

d-A Push Button Method

dConnection Using WPS

1. Press and hold the WPS button on the access point.

For details on pressing the WPS button, refer to the access point manual.

2. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

3. When the left screen appears, press the OK button.

The network connection setup is now complete.

d-B Standard setup

dConnection via Standard setup

1. Select Standard setup.

2. Press the OK button.

3. Select your access point, then press the OK button.

4. One of the screens below will be displayed on the printer.

5. Press the OK button.

6. Enter the network password (WEP key or passphrase).

Character entry is case-sensitive.

7. Press the left Function button.

8. Make sure that the network password is correct.

Character entry is case-sensitive.

9. Press the left Function button.

10.When the left screen appears, press the OK button.

The network connection setup is now complete.

d-C WPS

dConnection Using WPS

1. Select WPS.

2. Press the OK button.

3. Select Push button method.

4. Press the OK button.

5. Press the OK button.

6. Press and hold the WPS button on the access point.

For details on pressing the WPS button, refer to the access point manual.

7. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

8. When the left screen appears, press the OK button.

The network connection setup is now complete.

d-D Other setup (Advanced setup)

dConnection via Advanced setup

1. Select Other setup.

2. Press the OK button.

3. Select Advanced setup.

4. Press the OK button.

5. Select your access point, then press the OK button.

6. Select the security protocol used by the access point, then press the OK button.

Disable

7. When the left screen appears, press the OK button.

The network connection setup is now complete.



WEP

7. Select the WEP key number you want to use.

8. Press the OK button.

9. Press the OK button.

10.Enter the WEP key.

Character entry is case-sensitive.

11. Press the left Function button.

12.Make sure that the WEP key is correct.

13.Press the left Function button.

14.When the left screen appears, press the OK button.

The network connection setup is now complete.



WPA/WPA2

7. Press the OK button.

8. Enter the passphrase.

Character entry is case-sensitive.

9. Press the left Function button.

10.Make sure that the passphrase is correct.

11. Press the left Function button.

12.When the left screen appears, press the OK button.

The network connection setup is now complete.



Autres manuels pour PIXMA MG5420

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante tout-en-un

Canon

Canon imageclass MF229DW Manuel utilisateur

Canon

Canon PIXMA MX860 series Manuel utilisateur

Canon

Canon imageRUNNER 5070 Manuel utilisateur

Canon

Canon imageRUNNER 2220 Series Manuel utilisateur

Canon

Canon MultiPASS C530 Manuel utilisateur

Canon

Canon imageclass MF229DW Manuel utilisateur

Canon

Canon PIXMA MP780 Manuel utilisateur

Canon

Canon MP360 SERIES Manuel utilisateur

Canon

Canon 2184B002 Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE 8105 Manuel utilisateur

Canon

Canon PIXMA MX722 Manuel

Canon

Canon MF5750 - ImageCLASS B/W Laser Manuel utilisateur

Canon

Canon MX390 series Guide de configuration

Canon

Canon IMAGERUNNER ADVANCE C5051 Manuel utilisateur

Canon

Canon imageCLASS D760 Manuel utilisateur

Canon

Canon 5119B001AA Instructions de montage

Canon

Canon imageCLASS MF269dw Manuel utilisateur

Canon

Canon imageCLASS D1650 Manuel utilisateur

Canon

Canon imageRUNNER 1435P+ Manuel utilisateur

Canon

Canon imageCLASS D880 Instructions d'installation et d'entretien

Canon

Canon imagerunner advance C5550i Manuel utilisateur

Canon

Canon imageRUNNER 1435iF+ Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel utilisateur

Canon

Canon Oce VarioPrint DP Line Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur